Microscale Crack Growth Studies in Rheocast A356 (Al-Si-Mg) Alloy Using Extended Finite Element Method
Authors
-
NIT Durgapur ,IN
Prabas Banerjee -
CSIR-CMERI Durgapur ,INProsenjit Das
-
Mechanical Engineering Dept., KGEC, Kalyani ,INSantanu Das
-
CSIR-CMERI, Durgapur ,INTanbir Islam
DOI:
https://doi.org/10.24906/isc/2020/v34/i1/195951Abstract
Thixocasting [1] and Rheocasting [2] are the two methods available at present to produce semi solid slurry. Rheocasting unlike thixocasting does not require reheating of billet and semi solid slurry is developed from the molten metal produced in a typical die casting furnace. Rheocasting improves microstructure of die cast Al alloys significantly [2,3,4]. In the present work, Rheocasting had been performed employing cooling slope casting technique. With the help of cooling slope spherical primary crystals are produced which leads to better non dendritic microstructure. This offers improved mechanical properties such as good surface finish, net shape and enhanced accuracy [2]. Extended Finite Element Method [5,6,7] is utilized to simulate crack propagation in rheocast alloys to analyse their failure behaviour. In this research work, micro scale crack propagation in the rheocast alloys has been investigated numerically considering tensile loading condition. In this study, XFEM is used to simulate micro scale crack propagation and to study the effects of crack growth on different phases in alloy without the need of remeshing[8].Downloads
Downloads
Published
How to Cite
Issue
Section
References
J. Wannasin, S. Thanabumrungkul, “Development of a semi solid processing technique for aluminium casting applicationsâ€, Songklanakarin Journal of Science and Technology 30 (2008) 215-220.
T. Haga, P. Kapranos, “Simple rheocasting processâ€, Materials Processing Technology 130-131 (2002) 596-598.
K. Young, P. Elsen, “SSM(semi solid metal) technological alternatives for different applicationsâ€, Metallurgical Science and Technology, 18 (200) 20-34.
Z. Fan, “Semi solid metal processingâ€, International Materials Reviews 47 (2002) 89-97.
N. Sukumar, D. J. Srolovitz, “Finite element-based model for crack propagation in polycrystalline materialsâ€, Computational and Applied Mathematics 11 (2004) 891-899.
D.Wang, J.Zhou, “Extended finite element modeling of crack propagation in ceramic materials by considering the microstructural featuresâ€, Computional Materials Science 77 (2013) 236-244.
Z. Wang, L. Ma, “Numerical simulation of crack growth through particulate clusters in brittle matrix using the XFEM techniqueâ€, Procedia Engineering 10 (2011) 786-791.
T. Belytschko, T. Black, “Elastic crack growth in finite elements with minimal remeshingâ€, International Journal for Numerical Methods in Engineering 45 (1999) 601–620.
P. Das, S.K. Samanta, H. Chattopadhyay, B.B. Sharma, P. Dutta, “Eulerian two phase flow simulation and experimental validation of semisolid slurry generation process using cooling scopeâ€, Materials Science and Technology 29(1) (2013) 83-92.
P. Das, S.K. Samanta, T. Ray, B.R.K. Venkatpathi “Mechanical properties and tensile fracture mechanism of rheocast A356 al alloy using cooling slopeâ€, Advanced Materials Research 585 (2012) 354-358.
Abaqus user guide manual 6.10 (2009)
S. Nafisi, O. Lashkari, F. Ajersch, A. Charette, “Microstructure and rheological behavior of grain refined and modified semi solid A356 Al-Si slurriesâ€, Acta Materialia 54 (2006) 3503-3511.
S. Mohammadi “Extended finite element method for fracture analysis of structures†Blackwell Pub., (2008).
Ayyar, N. Chawla, “Microstructure based modeling of the influence of particle spatial distribution and fracture on crack growth in particle reinforced compositesâ€, Acta Materialia 55 (2007) 6064-6073.
