Development of A Computational Model to Investigate Precipitation Kinetics in Al Alloy

Jump To References Section

Authors

  • S. Gogoi
     Department of Mechanical Engineering, Tezpur University, Tezpur 784028 ,IN
  • S. Bhowmick
     Department of Mechanical Engineering, Tezpur University, Tezpur 784028 ,IN
  • S. Banerjee
     Department of Mechanical Engineering, Tezpur University, Tezpur 784028 ,IN

DOI:

https://doi.org/10.24906/isc/2020/v34/i5/206999

Keywords:

Aluminium alloys, Precipitation behavior, Differential Scanning Calorimetry, X-Ray Diffraction, Activation energy.

Abstract

Differential Scanning Calorimetry (DSC) tests were performed on the cast and solutionized 2219Al alloy at varying heating rates, to identify the endothermic peaks corresponding to the precipitation reaction. A new computational model was proposed to evaluate the kinetic parameters, activation energy and subsequently the kinetic rate equation was generated in order to investigate the intensity of precipitation hardening for these alloys.

Downloads

Download data is not yet available.

Downloads

Published

2020-09-01

How to Cite

Gogoi, S., Bhowmick, S., & Banerjee, S. (2020). Development of A Computational Model to Investigate Precipitation Kinetics in Al Alloy. Indian Science Cruiser, 34(5), 52–58. https://doi.org/10.24906/isc/2020/v34/i5/206999

Issue

Volume 34, Issue 5, September 2020

Section

Search & Survey
Crossref
Scopus
Google Scholar
Europe PMC

 

References

S Banerjee, P S Robi, A Srinivasan and L P Kumar, High Temperature Deformation Behavior of Al-CuMg Alloys Micro-alloyed with Sn, Material Science & Engineering A, Vol 527, page 2498-2503, 2010.

S Banerjee, P S Robi, A Srinivasan and L P Kumar, Effect of Trace Additions of Sn on Microstructure and Mechanical Properties of Al-Cu-Mg Alloys, Materials Design, Vol 31, page 4007-4015, 2010.

P Bassani, E Gariboldi, and D Ripamonti, Thermal Analysis of Al-Cu-Mg-Si Alloy with Ag/ Zr Additions, Journal of Thermal Analysis and Calorimetry, Vol 91, page 29-35, 2002.

R K Bhushan, S Kumar, and S Das, Fabrication and Characterization of 7075 Al Alloy Reinforced with Sic Particulates, International Journal of Advanced Manufacturing Technology. Vol 65, page 611-624, 2013.

W D Callister, Material Science and Engineering: An Introduction, John Wiley & Sons, Inc., Vol 4, 1997.

C S T Chang and J Banhart, Low-Temperature Differential Scanning Calorimetry of a Al-Mg-Si Alloy, Metallurgical and Material Transactions A, Vol 42, page 1960-1964, 2011.

E N Coker, The Oxidation of Aluminum at High Temperature Studied by Thermogravimetric Analysis and Differential Scanning Calorimatry, Sandia Report, page 2013-8424, 2013.

M J Dianez, E Donoso and J M Criado, Study by DSC and HRTEM of the Aging Strengthening of Cu-Ni-Zn-Al Alloys, Materials Design, Vol 92, page 184-188, 2016.

V I Elagin, Ways of developing high-strength and high-temperature structural Aluminum alloys in the 21st century, Metal Science and Heat Treatment, Vol 49, page 427-434, 2007.

M Fatmi, B Ghebou and M A Ghebouli, Study of Precipitation Kinetics in Al-3.7 wt% Cu Alloy during Non-Isothermal and Isothermal Ageing, Chinese Journal of Physics. Vol. 51, page 5-7, 2013.

N Gao, M J Starink, and T G Langdon, Using Differential Scanning Calorimetry as An Analytical Tool for Ultrafine-Grained Metals Processed by Severe Plastic Deformation, Material Science & Technology, Vol 25, page 687-698, 2009.

P Gill, T T Moghadam, and B Ranjbar, Differential Scanning Calorimetry Techniques: Applications in Biology and Nanoscience, Journal of Biotechnology. Vol 21, 2010.

K A L Gonza Lez, R D Lara, Calorimetry Study of the Precipitation, Journal of Thermal Analysis and Calorimetry Vol 121, page 589-595, 2015.

N Haghdadi, A B Phillion, D M Maijer, Microstructure Characterization and Thermal Analysis of Aluminium Alloy B206 During Solidification, Metallurgical and Material Transactions, page 112-117, 2006.

A Heinz, A Haszler, C Keidel, S Moldenhauer, R Benedictus and W S Miller, Recent Development in Aluminium Alloys for Aerospace Applications, Material Science and Engineering A, Vol 80, page 102-107, 2000.

S Hirosawa, T Sato, A Kamio, and H M Flower, Classification of the Role of Microalloying Elements in Phase Decomposition of Al based Alloys, Acta Materilia, Vol 48, page 1797-1806, 2000.

E Hornbogen, Hundred Years of Precipitation Hardening, Journal of light metals, Vol 1, page 127-132, 2012.

C H Hsuch, P Miranda, P F Becher, An Improved Co-relation between Impression and Uniaxial Creep, Journal of Applied Physics, Vol 99, page 113-513, 2006.

C R Hutchinson and S P Ringer, Precipitation Processes in Al-Cu-Mg Alloys Microalloy with Si, Metallurgical and Materials Transactions A, Vol 31, page 21-27, 2000.

R Kaibyshev, I Kazakulov, D Gromov, F Muskin, D R Lesuer and T G Neih, Superplasticity in 2219 Al-Alloys, Scripta Matterilia, Vol 44, page 24112417, 2001.

K Kaibyshev, O Sitdikov, I Mazurina and D R Lesuer, Deformation Behavior of 2219 Al-Alloys, Material Science and Engineering A, Vol 334, page 104-113, 2002.

A Wilm, German patent, DRP 244554, 1906.

S Gogoi, Effect of Rolling and Age-Hardening on the Mechanical Properties of Microalloyed 2219 Al alloy, Master’s thesis, Tezpur University, Assam, India, 2017.

E Donoso, Material Science and Engineering, Vol 74, page 38-39, 1985.

A Varschavsky and E Donoso, The Influence of Particle Shape on the Non-isothermal Kinetics of Precipitate Dissolution, Thermochimica Acta, Vol 69, page 340-341 1983.

E Woldt, The Relationship between Isothermal and Non-isothermal description of Johnson-MehlAvrami-Kolmogorov kinetics, Journal of Physics and Chemistry of Solids, Vol 53, page 521-527, 1992.