Sir L. P. Misra Memorial Lecture 2016-The Saga of Environmental Degradation of Welds-My Experiences

Jump To References Section

Authors

  • Hasan Shaikh

DOI:

https://doi.org/10.22486/iwj/2017/v50/i2/146565

Abstract

At the outset, I am grateful to the Indian Institute of Welding for selecting me to deliver the prestigious Sri L. P. Misra Memorial Lecture. I am doubly honoured since I am delivering this Lecture during the Golden Jubilee Year at the Home of the Institute.

Downloads

Published

2017-06-07

Issue

Volume 50, Issue 2, April 2017

Section

Research Articles

 

References

H. Shaikh, H. S. Khatak and J. B. Gnanamoorthy, 'Stress Corrosion Cracking of Weldments of AISI Type 316 Stainless Steel', Werkstoffe und Korrosion, 38 (1987) 183-187.

T. Anita, H. Shaikh, H. S. Khatak and G. Amarendra, 'Effect of Heat Input on the Stress Corrosion Cracking Behaviour of Weld Metal of Nitrogen-Added AISI Type 316 Stainless Steel', Corrosion, 60 (2004) 873-880.

Hasan Shaikh, 'Studies on the Stress Corrosion Cracking, Corrosion Fatigue and Pitting Corrosion Behaviour of Austenitic Stainless Steels Used For Nuclear Reactor Applications', PhD Desertation, University of Madras, 2007.

T. V. Vinoy, H. Shaikh, H. S. Khatak, N. Sivaibharasi, and J. B. Gnanamoorthy, 'Stress Corrosion Crack Growth Studies on AISI Type 316 Stainless Steel in Boiling Acidified Sodium Chloride Solution', Journal of Nuclear Materials, 238 (1996) 278-284.

H. Shaikh, G. George, F. Schneider, K. Mummert and H. S. Khatak, 'Stress Corrosion Crack Growth Studies on Nitrogen-Added AISI Type 316 Stainless Steel and its Weld Metal in Boiling Acidified Sodium Chloride Solution Using the Fracture Mechanics Approach', 51 (2000) 719-727.

H. Shaikh, A. Poonguzhali, R. K. Dayal and H. S. Khatak, 'Corrosion Fatigue of AISI Type 316LN Stainless Steel and its Weld Metal', Corrosion, 65 (2009) 37-48.

Zahida Begum, A. Poonguzhali, Ranita Paul, H. Shaikh, R. V. Subba Rao, Awani Kumar Patil and R. K. Dayal, 'Corrosion Fatigue Behaviour of Different Austenitic Stainless Steels', Corrosion Science, 53 (2011) 1424-1432.

H. Shaikh, M. G. Pujar, N. Sivaibarasi, P. V. Sivaprasad and H. S. Khatak, 'Effect of High Temperature Aging on Ferrite Trans-formation Kinetics and Tensile Properties of Type 316L Stainless Steel Weld Metal', Materials Science and Technology, 10 (1994) 1096-1103.

H. Shaikh, T. V. Vinoy, H. S. Khatak, 'Correlation of Microstucture and Tensile Properties of 316 Stainless Steel Weld Metal Solution Annealed at High Temperatures', Materials Science and Technology, 14 (1998) 129-135.

H. Shaikh, B. P. C. Rao, S. Gupta, R. P. George, S. Venugopal, B. Sasi, T. Jayakumar and H. S. Khatak, 'Assessment of Intergranular Corrosion in AISI Type 316L Stainless Steel Weldments', British Corrosion Journal, 37 (2002) 129 - 140.

H. Shaikh, N. Sivaibharasi, B. Sasi, T. Anita, R. Amirthalingam, B. P. C. Rao, T. Jayakumar, H. S. Khatak and Baldev Raj, 'Use of Eddy Current Testing Method in Detection and Evaluation of Sensitisation and Intergranular Corrosion in Austenitic Stainless Steels', Corrosion Science, 48 (2006) 1462-1482.

Hasan Shaikh, N. Sivaibharasi, B. Sasi, T. Anita, B. Poorna Chandra Rao, Ravin Kumar Dayal, T. Jayakumar and Baldev Raj, 'Effect of Carbon Content on Eddy Current Response to Sensitisation and Integranular Corrosion in Simulated Heat Affected Zone of Austenitic Stainless Steel ', Welding in the World, 56 (2012) 44-53.

T. Anita, R. V. Subba Rao, H. Shaikh, R. K. Dayal, 'Report on the Cleaning Procedure Developed for the Affected Steam Generator Tubes of Prototype Fast Breeder Reactor', IGCAR/CSTD/2008/34 dated 30 July, 2008.

H. Shaikh, S. K. Albert, H. C. Dey and D. Sunil Kumar, Unpublished Work.