General Review of C-Weld in LPG Cylinders
Jump To References Section
Authors
-
Department of Mechanical Engineering, Indian Institute of Science, Bangalore - 560 012 ,IN
K. S. Shamanna -
Department of Mechanical Engineering, Indian Institute of Science, Bangalore - 560 012 ,INK. S. S. Murthy
-
Department of Mechanical Engineering, Indian Institute of Science, Bangalore - 560 012 ,INK. R. Y. Simha
Abstract
The C-weld of LPG Cylinders of 33.3 liters water capacity filled with gas at a vapor pressure of 16.9 atm at 65° C is considered in this paper Submerged Arc Welding (SWA) is the process normally adopted. The parameters considered are base metal, electrode/flux combination, current, and voltage, post weld heat treatment, etc. Optimum conditions for the process are given, but they may slightly vary from the welding machine to the welding machine.
