Computational Investigation of Heat Transfer and Mass Flow in GTA Welding of AA6061 Plates
Authors
-
Dept. of Mechanical Engineering UVCE, BUB, Bangalore ,IN
Vishwanath M. M. -
Dept. of Mechanical Engineering UVCE, BUB, Bangalore ,INN. Lakshamanaswamy
DOI:
https://doi.org/10.22486/iwj.v54i2.209182Keywords:
Gas Tungsten Arc Welding, Hemispherical Heat Source Model, Heat Transfer, Fluid Flow, Modeling, Temperature Field.Abstract
Computational approach or numerical simulation is a trend in recent manufacturing technology, in the present study a computational approach is made for a pulse type GTAW to analyze the heat transfer and mass flow behavior using FEA software ANSYS 19.0. Transient thermal simulations are carried at three different heat inputs in the form of voltage and currents with the welding speed of 70mm/min. The heat source profiles are obtained with the different heat inputs from experimental investigations. The same heat source profiles are modeled using the Solid EDGE software and called in the ICEM CFD to generate grids with unstructured tetrahedral mesh and grids are also made for the workpiece by modelling for a dimension of 150mm × 100mm having 6mm thickness same as the experimental workpiece. The generated Finite element model is called in ANSYS Workbench for transient thermal simulations to obtain the temperature distributions and the heat source models are also called in ANSYS Fluent for velocity field. The heat source models selected and the temperature field obtained from the computational numerical simulations are in good agreement with the experimental results indicating validation of the simulation process made.Downloads
Published
Issue
Section
References
Goldak J, Chakravarti A and Bibby M (1984); A new finite element model for welding heat sources, Metallurgical Vishwanath et al. : Computational Investigation of Heat Transfer and Mass Flow in GTA Welding of AA6061 Plates and Materials Transactions B., 15, pp.299-305.
Friedman E (1975); Thermo-mechanical analysis of the welding process using the finite element method, Journal Pressure Vessel Technology, Trans. ASME, 97, pp.206-213.
Krutz GW and Segerlind LJ (1978); Finite element analysis of welded structures, Welding Journal Research Supplement, 57, pp.211-216.
Christensen N and Davis V (1965); Distribution of temperatures in arc welding, British Welding Journal, 12, pp.54-75.
P Tekriwal and J Mazumder (1988); Finite Element Analysis of Three Dimensional Transient heat Transfer in GMA Welding, Welding Journal, 67(5), pp.150-156.
A Bonifaz (2000); Finite Element Analysis of Heat Flow in Single Pass Arc Welds, Welding Journal, 59, pp.121-125.
Prasad NS and Narayanan TKS (1996); Finite element analysis of temperature distribution during arc welding using adaptive grid technique, Welding Journal, 75(4), pp.123-128.
Kumaresan D, Asraf AK and Ramaswamy M (2011); Numerical Simulation on Heat transfer and Residual stress in a butt welded plate, Journal of Pressure Vessel Technology,133, pp.1-10.
Zhu X and Chao Y (2002); Effects of temperature dependent material properties on Welding Simulation, Comput. Struct., 80, pp.967-976.
Manurunga YHP, Lidam RN, Rahim MR, Zakaria MY, Redza MR, Sulaiman MS, Tham G and Abas SK (2013); Welding distortion analysis of multipass joint combination with different sequences using 3D FEM and experiment, International Journal of Pressure Vessels and Piping, 111, pp. 89-98.
Atabaki MM, Nikodinovski M, Chenier P, Ma J, Liu W and R Kovacevic (2014); Experimental and numerical investigations of hybrid Laser Arc Welding of Aluminium alloys in the thick T-Joint configuration, Optics and Laser Technology, 59, pp.68-92.
Traidia A and Roger F (2011); Numerical and experimental study of arc and weld pool behaviour for pulsed current GTA welding, International Journal of Heat and Mass Transfer, 54, pp.2163-2179.
Fu D, Zhou C, Li C, Wang G and Li L (2014); Effect of welding sequence on residual stress in thin-walled octagonal pipe−plate structure, Trans. Nonferrous Met. Soc. China, 24, pp.657−664.
Magalhães ES, Silva ALFL and Silva SMML (2018); Thermal analysis efficiency of a Gas Tungsten Arc Welding process using a temperature moving sensor, International Journal of Thermal Sciences, 129, pp.47-55.
Vishwanath MM and Lakshamanaswamy N (2018); Experimentally validated Numerical simulation of heat transfer behavior of Dissimilar AA5052-6061 plates in Friction stir welding, Indian Welding Journal, 51(4), pp. 66-74.
Farzadi A, Serajzadeh S and Kokabi A H (2008); Modeling of heat transfer and fluid flow during gas tungsten arc welding of commercial pure aluminum, International Journal of Advanced Manufacturing Technology, 38, pp.258-267.
Sahoo P, DebRoy T and McNallan MT (1988); Surface tension of binary metal surface active solute systems under conditions relevant to welding metallurgy, Metall. Trans. B., 19(B), pp.483-491.
Mishra S, Lienert TJ, Johnson MQ and Deb Roy T (2008); An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations, Acta. Materials, 56, pp.2133-2146.
Fan HG, Tsai HL and Na SJ (2001); Heat and fluid flow in a partially or fully penetrated weld pool in gas tungsten arc welding, Int. J. Heat Mass Transfer, 44, pp.417-428.
Kim WH and Na SJ (1998); Heat and fluid flow in pulsed current GTA weld pool, Int.J. Heat Mass Transfer, 41, pp.3213-3227.
