-
243
-
180
-
90
-
73
-
70
Volume 51, Issue 3, July 2018
Published:
2018-07-01
Articles
-
Shear Tensile and High Cycle Fatigue Performance of MIG Brazed DP600-GI Steel Sheet Joint
Sushovan Basak, Tapan Kumar Pal, Mahadev Shome42-53Keywords:
Galvanized Dual Phase Steel, MIG Brazing, Push and Pull Mode, Bead Geometry, Microstructure, High Cycle Fatigue.
Abstract views: 24 times|
Download: 11 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175007
-
Microstructure Evolution and Mechanical Properties of Friction Stir Welded Thick HSLA Steel
A. Gourav Rao, A. P. Singh, S. Parida, A. Kumar, V. P. Deshmukh54-58Keywords:
Friction Stir Welding, High Strength Low Alloy Steel (HSLA), Microstructure, Tensile Properties, Scanning Electron Microscopy. Abstract views: 12 times|
Download: 17 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175006
-
Vacuum Brazing Of Titanium/316L Stainless Steel Transition Joint For Application In Helium Vessel Of Superconducting RF Cavities
P. Ganesh, Abhay Kumar, S. C. Vishwakarma, Aniruudha Bose, Ram Kishor Gupta, B. Sindal, S. K. Rai, P. Chinna Rao, P. Ram Sankar, D. C. Nagpure, R. Kaul, G. Mundra, B. Singh59-65Keywords:
Vacuum Brazing, Titanium, Stainless Steel 316L, BVAg8, Superconducting Radiofrequency (SRF) Cavities, Intermetallic Phases. Abstract views: 26 times|
Download: 8 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175005
-
Influence of Heat input on Corrosion Resistance of Duplex Stainless Steel Cladding using Flux Cored Arc Welding on Low Alloy Steel Flats
Manas Kumar Saha, Jaydeep Mondal, Ajit Mondal, Santanu Das66-72Keywords:
Cladding, FCAW, Heat Input, Corrosion, Regression Analysis. Abstract views: 22 times|
Download: 8 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175002
-
Theoretical Thermal Model of MIG Welding of FSS (AISI 430) Using ANSYS and its Experimental Verification
A. K. Pathak, Ch. Sree Harsha73-80Keywords:
Ferritic Stainless Steel, MIG Welding, Cooling Rate, Temperature Distribution, Thermocouple, ANSYS. Abstract views: 20 times|
Download: 11 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175003
-
Air-Cooled Induction Heating Solution for Heat Treatment of P91 Grade Steel in Welding Applications
Arun Kumar Paul, Nimesh Chinoy, Banamali Das, Sunil Bhonsale81-88Keywords:
Post Weld Heat Treatment (PWHT), Programmable Logic Controller (PLC), Self-tuning Controller, Wide Range Induction Heating, Zero Voltage And Near Zero Current Switching (ZVS-N-ZCS). Abstract views: 27 times|
Download: 7 times|
https://doi.org/10.22486/iwj/2018/v51/i3/175004
TIT Bit in Welding
-
An Approach to Best Welding Practice:Part – XI
S. K. Gupta35-41 Abstract views: 13 times|
Download: 23 times|
