Numerical Analysis of High Wall and Dumps Slope Stability

Jump To References Section

Authors

  • D. Kotaiah
     Department of Mining Engineering, UCE (KU), Kothagudem, Paloncha – 507115, Telangana ,IN
  • Ravi Kiran
     Department of Mining Engineering, UCE (KU), Kothagudem, Paloncha – 507115, Telangana ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/30801

Keywords:

Slope, High Wall, Dumps, Slope Stability, GALENA.

Abstract

Slope stability is one of the major concerns in the field of mining and civil engineering. There were numerous cases of slope failures being reported in a year all over the world, and the process of understanding the rocks or soil forming these slopes was still being a puzzle due to their dynamic anisotropic behaviour. This study mainly focuses on understanding the influence of different parameters of Slope Stability and designing the models of slope stability along with the different sections and monitoring of Highwall and Dumps (Internal and External) using Galena Software.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-09-16

How to Cite

Kotaiah, D., & Kiran, R. (2022). Numerical Analysis of High Wall and Dumps Slope Stability. Journal of Mines, Metals and Fuels, 70(6), 288–297. https://doi.org/10.18311/jmmf/2022/30801

Issue

Volume 70, Issue 6, June 2022

Section

Articles
Crossref
Scopus
Google Scholar
Europe PMC

 

References

Singh, B., & Goel, R.K. (2011). Shear strength of rock masses in slopes, Engineering Rock Mass Classification, 20–210. https://doi.org/10.1016/B978-0-12-385878-8.00016-1 DOI: https://doi.org/10.1016/B978-0-12-385878-8.00016-1

Chen, W.F. (1975). Limit analysis and soil plasticity. Amsterdam: Elsevier, 4–14.

Dawson, E.M., Roth, W.H., & Drescher. (1999). Slope stability analysis by strength reduction, Geotechnique, 49(6), 835–840. https://doi.org/10.1680/geot.1999.49.6.835 DOI: https://doi.org/10.1680/geot.1999.49.6.835

Tang, G., Zhao, L., Liang, L., Zuo, S., & Zhang, R. (2017). Stability design charts for homogeneous slopes under typical conditions based on the double shear strength reduction technique, Arabian Journal of Geosciences, 10, 280. DOI: https://doi.org/10.1007/s12517-017-3071-4

Griffiths, D.V., Lane, P.A. (1999). Slope stability analysis by finite elements, Geotechnique, 49(3), 387–403. https://doi.org/10.1680/geot.1999.49.3.387 DOI: https://doi.org/10.1680/geot.1999.49.3.387

Jiang, X.Y., Wang, Z.Y., Liu, L.Y., et al. (2013). The determination of reduction ratio factor in homogeneous soil-slope with finite element double strength reduction method, Open Civil Engineering Journal, 7, 205 –209. https://doi.org/10.2174/1874149501307010205 DOI: https://doi.org/10.2174/1874149501307010205

Michalowski, R.L. (1995a). Stability of slopes: Limit analysis approach, Reviews in Engineering Geology, 10, 51–62. https://doi.org/10.1130/REG10-p51 DOI: https://doi.org/10.1130/REG10-p51

Cala, M., & Flisiak, J. (2001). Slope stability analysis with FLAC and limit equilibrium methods. CRC Press, 4.

Michalowski, R.L. (2002). Stability charts for uniform slopes, Journal of Geotechnical and Geoenvironmental Engineering, 128(4), 351–355. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:4(351) DOI: https://doi.org/10.1061/(ASCE)1090-0241(2002)128:4(351)

Singh, R., Umrao, R.K., & Singh, T.N. (2017). Hill slope stability analysis using two and three dimensions analysis: A comparative study, Journal Geological Society of India, 89, 295–302. https://doi.org/10.1007/s12594-017-0602-2 DOI: https://doi.org/10.1007/s12594-017-0602-2

Chen, Y., Lin, H., Cao, R., & Zhang, C. (2020). Slope stability analysis considering different contributions of shear strength parameters, International Journal of Geomechanics, 1532–3641. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001937 DOI: https://doi.org/10.1061/(ASCE)GM.1943-5622.0001937