Design of Underground Mining Wireless Communication Resource Algorithm based on Chaotic Neural Network

Jump To References Section

Authors

  • Zhao Liang
     Department of Basic, Jilin Justice Officer Academy, Jilin, Changchun 130062 ,CN

Keywords:

Underground coal mine, mining wireless communication resource algorithm, chaotic neural network, OFDMA

Abstract

There are more and more applications of underground wireless communication in coal mines, such as coal mine video monitoring systems, coal mine dispatching systems, and coal mine safety data fusion systems. These coal mining systems require a large amount of data transmission, occupying a large amount of bandwidth, and the mine underground wireless communication resources are limited. It is necessary to allocate these resources reasonably to ensure the effective operation of these services. Coal mine underground radio resource allocation and optimization is the interface resources between the entire coal mine wireless communication system, such as communication bandwidth, signal spectrum and transmission time slot management, including channel multiplexing, packet scheduling, network optimization, load balancing and other related methods. The efficiency of the entire communication system is improved by maximizing the rational use of wireless network resources. In existing coal mine wireless communication resource optimization algorithms, there are adaptive feedback, wireless cooperative channel multiplexing technologies, etc. The existing wireless resource algorithms generally have high complexity, and there is still a certain space between the final calculation result and the optimal solution. This paper studies the existing coal mine underground optimization algorithm and optimizes and improves the existing chaotic neural network. It effectively reduces the complexity of the algorithm and makes the setting of parameters more consistent with the underground coal mine communication environment. At the same time, through a large number of tests, the parameter sets of chaotic neural network are provided, and a coal mine underground wireless resource optimization algorithm based on chaotic neural network is proposed, and the simulation results are given. The simulation results show that the algorithm proposed in this paper can effectively optimize the interface resources between the entire underground coal mine wireless communication system and improve the coal mine resource allocation rate.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-20

How to Cite

Liang, Z. (2022). Design of Underground Mining Wireless Communication Resource Algorithm based on Chaotic Neural Network. Journal of Mines, Metals and Fuels, 67(3), 111–115. Retrieved from https://informaticsjournals.co.in/index.php/jmmf/article/view/31500

Issue

Volume 67, Issue 3, March 2019

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

References

Minav T. A., Pyrhonen J. J., and Laurila L. I. E. (2010): Permanent magnet synchronous machine aizing: Effect on the energy efficiency of an electro-hydraulic forklift. IEEE Transactions on Industrial Electronics, 59(6), 2466–2474.

Kim B. K., Chung W. K., and Ohba K. (2009): Design and performance tuning of sliding-mode controller for high-speed and high-accuracy positioning systems in disturbance observer framework. IEEE Transactions on Industrial Electronics, 56(10), 3798–3809.

Du C., Li H., and Thum C. K., et al. (2010): Simple disturbance observer for disturbance compensation.

IET Control Theory and Applications, 4(9), 1748–1755.

Zhao Yang, Cai Yanguang, and Fan Guobing. (2016): Dynamical Behavior for Fractional-order Shunting Inhibitory Cellular Neural Networks. Journal of Nonlinear Science and Applications, 9(6),4589-4599.

Wu Y., Liu X., and Tian D. (2011): Research of compound controller for flight simulator with disturbance observer. Chinese Journal of Aeronautics, 24(5), 613–621.

Tokat S., Eksin I. and M. Guzelkaya. (2009). Linear time-varying sliding surface design based on coordinate transformation for high-order systems. Transactions of the Institute of Measurement and Control, 31(1), 51–56.

Zhao Yang, Guo Zhenghong, and Yan Jianming. (2017): Vibration Signal Analysis and Fault Diagnosis of Bogies of the High-speed Train based on Deep Neural Networks. Journal of Vibroengineering, 19(4), pp. 2456-2474.

Bartoszewicz A. and Nowacka-Leverton A. (2010): ITAE optimal sliding modes for third order systems with input signal and state constraints. IEEE Transactions on Automatic Control, 55(8), 1928-1932.

Ho T. H. and Ahn K. K. (2011): Speed control of a hydraulic pressure coupling drive using an adaptive fuzzy sliding-mode control. IEEE/ASME Transactions on Mechatronics, 17(5), 976–986.

Feng Y., Yu X. H. and Han F. L.. (2011): High-order terminal sliding-mode observer for parameter estimation of a permanent-magnet synchronous motor. IEEE Transactions on Industrial Electronics, 60(10), 4272–4280.

Tokat S., Eksin I., Gûzelkaya M. and Sõylemez T. (2003): Design of a sliding mode controller with a nonlinear time-varying sliding surface. Transactions of the Institute of Measurement and Control, 325(2), 145–162.

Yilmaz C. and Hurmuzlu Y. (2000): Eliminating the reaching phase from variable structure control. Transactions of the ASME, Journal of Dynamic Systems, Measurement and Control, 122(20), 1–15.

Liu L., Han Z. and Li W. (2009): Global sliding mode control and application in chaotic systems. Nonlinear Dynamics, 56(1-2), 193–198.

Zhao Yang, Cai Yanguang and Cheng Defu. (2017): A Novel Local Exploiation Scheme for Conditionally Breeding Real-coded Genetic Algorithm. Multimedia Tools and Applications, 76(17), 17955-17969.

Pang H. and Chen X. (2009): Global robust optimal sliding mode control for uncertain affine nonlinear systems. Journal of Systems Engineering and Electronics, 20(4), 838–843.

Cao Y. and Chen X. B. (2014): Disturbance-observerbased sliding-mode control for a 3-DOF nanopositioning stage. IEEE/ASME Transactions on Mechatronics, 19(3), 924–931.

Yang J., Li S. and Yu. X. (2013): Sliding-mode control for systems with mismatched uncertainties via a disturbance observer. IEEE Transactions on Industrial Electronics, 60(1), 160–169.

Zhao Yang (2016): Research on Active Control of the Dynamic Vibration for Underwater Robot. Journal of the Balkan Tribological Association, 22(1A), 770-779.

Sariyildiz1 E. and Ohnishi K. (2013): A guide to design disturbance observer. Journal of Dynamic Systems, Measurement, and Control, 136(2), 338–343.