The Output Mechanism of Coal Powder in CBM Production

Jump To References Section

Authors

  • Wang Qingwei
     School of Resources and Environment, North China University of Water Resources and Electric Power, Zhengzhou, 450046 ,CN
  • Yan Qiang
     Research Center for Strategy of Global Mineral Resources, CAGS, Beijing 100037 ,CN
  • Liu Gaofeng
     College of Resources and Environment, Henan Polytechnic University, Jiaozuo, Henan, 454003 ,CN

Keywords:

Coal Powder, Output Mechanism, CBM, Discussion.

Abstract

Reasonable controlling of the coal powder production has become a key factor in CBM well’s high and steady yield. However, the forming mechanism and type of coal powder is not systematically studied so far due to the weak of theoretical basis and the lack of information on engineering practice in past. Based on the domestic and foreign literatures, starting from the coal petrography features, by using microcosmic & ultra-microscopic method and combining with engineering practice, the main recognitions are concluded as follow: (1) Through the mechanical model of coal instability failure under the engineering disturbance, the coal transformation is influenced by many factors such as structure, formation, component, coalification degree and gas generation and (and liquid) release. (2) By combining the rock mechanical properties and the on-site CBM wells production, the reason of coal powder production is generally analyzed, the types of coal powder output is classified and its output mechanism is discussed. It is of great practical significance and theoretical reference for the CBM development.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-19

How to Cite

Qingwei, W., Qiang, Y., & Gaofeng, L. (2022). The Output Mechanism of Coal Powder in CBM Production. Journal of Mines, Metals and Fuels, 64(12), 701–707. Retrieved from https://informaticsjournals.co.in/index.php/jmmf/article/view/31639

Issue

Volume 64, Issue 12, December 2016

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

References

Lian T., (2005): Global Energy Supply versus Demand: Current Status and Growth Curve. International Petroleum Economics, vol. 13, no. 1, pp. 30-33.

Fu R. B., Zhang H. M. (2005): Status on Energy Sources in China, Energy & Environmental Protection, vol. 19, no. 1, pp. 8-12.

Cui W. (2005): Extensive’s Model of Economic Growth is Unadvisable. Decision Making Magazine, vol. 3, no. 8, pp. 14-15.

Wu J., Yang J. H. (2004): Control on Green Energy Source & Ecologic Environment. Control Theory & Applications, vol. 21, no. 6, pp. 864-

Fan W. T. (2005): Energy Situation and Development Tendency, Yunnan Energy-saving Communication, vol. 465, no. 7, pp. 1-6.

Ni W. D., Li Z. (2003): Polygeneration: A Very Important Way to Overcome Five Challenges in Energy Field of China, No.2, 2245-2251.

Niu Y. F. (1999): The Study of Environment in the Plateau of Qin Tibet. Progress in Geography, vol. 18, no. 2. pp. 163-171.

Wang H. Y., Zhang J. B. (2003): et al. The Prediction of Proved Economic Reserves and Development Prospect of CBM in China. Petroleum Exploration and Development, no. 1. pp. 15-17.

Liu H. L., Wang H. Y., (2001): et al. CBM Resource and its Exploration Direction in China. vol.28, no.1. pp.9-11.

Su X. B., Chen J. F., Sun J. M., (2001): CBM Geology and Exploratory Development. Beijing: Science press, pp. 12-20.

Yan X. C., Hao H. Y., (2007): The Status and Development of Foreign Technology. Oil Forum, no. 6. pp. 24-30.

Li W. Y. (200l): Chinese CBM Exploration and Geological Evaluation Technology New Progress .XuZhou: China Mining University Press, l^ÿ4,

Wang S. W., Chen Z. H. (1995): Coal Bedrock Fissure Characteristics and the significance of the output of CBM.Earth Science, no. 6. pp. 557~561.

Zhang X. M. (2002): Main Technical Problems and Strategy Faced in the CBM Development in China. Coal Geology & Exploration, vol. 30, no. 2. pp. 19-23.

He W. G. (2000): Effect of In situ Stress on Coalbed Permeability. Journal of Liaoning Technical University, vol. 19, no. 4. pp. 353-355.

S. Tang H. (2001) Probe into the Influence Factors on Permeability of Coal Reservoirs.Coal Geology of China, vol. 13, no. 1. pp. 29-30.

Li P. C. (2002): Summarizing and Analyzing the Factors Affecting the Coefficient of Permeability of Coal Beds. Natural Gas Industry, vol. 25, no. 2. pp. 33-36,.

Yi J., Jiang Y. D. (2009): A Liquid-solid Dynamic Coupling Model of Ultrasound Enhanced CBM Desorption and Flow. Rock and Soil Mechanics, vol. 30, no. 10. pp. 2945-2949.

King L. (1959): Coal and Gas Outburst .BeijingÿCoal Industry Press, pp, 133-143.

Wan Y. J., Cao W. (2005): Analysis on Production-affecting Factors of Single Well for CBM . Natural Gas Industry, vol. 25, no. 1. pp. 124^ÿ126.

Xian B. A. (2005): Analysis on Exploitation Mechanism and Application of CBM with Directional Pinnaate Horizontal Wells. vol. 25, no. 1. pp. 114 -116.

Wu S. Y. (2001): Study of the Mechanism of Increasing Production of CBM Production by Gas Injection. Journal of China Coal Society, vol. 26, no. 2. pp. 199-203.

Lame R. D. (1989) The Significance of Mixture gas to the Coal’s Absorption, Desorption and Mine Ventilation.The fourth international conference of mine ventilation[c], [s.1.]:[s.n.].

Yu Y. J., Yang Q. (2001): A Review on Studies of CBM Reservoirs in China. Geological Science and Technology Information, vol. 20, no. 1. pp. 56-60.

Zhang Y. H., Wu Y. (2009): The Analysis of Coal Metamorphism Types and Function . Modern Economic Information, no. 19. pp. 36-39.

He J. (2001): The Analysis of Main Affecting Parameters of CBM Recoverability in Northern China . Henan Petroleum, no. 5. pp. 14-15.

Zhang W. H. (1995): CBM Geological Characteristics and Site Screening Research. Geology Research Department of Huabei Oil Field, pp. 141-152.

Wang D. B. (2002): Brief Introduction on Metamorphic Problems of Coal . Coal Geology of China, vol. 14, no. 2. pp. 12-15.

Chen Z. H., Wang Y. B. (2009): Destructive Influences and Effectively Treatments of Coal Powder to High Rank CBM Production. Journal of China Coal Society, vol. 34, no. 2. pp. 229-232,.

Bai J. M. (2009): The Preliminary Understanding of CBM Formation Mechanism of Horizontal Multi-branch, The National Conference on CBM: no. 2. pp. 425-431,

Li Y. M. (2010): Study on Coal Reservoir Damage Mechanism in Dewatering and Extraction Process of CBM Wells. China Coalbed Methane, vol. 7, no. 6. pp. 39-43,.

Gao Y. J. (1999): Compact Process of Fine Powdered Coal and Its Influence on Threshold Velocity . Journal of Hohai University, vol. 27, no. 4. pp. 54-59.

Yan H. W. (2010): Study on Discharging Condition of Coal Dust from Annulus between Rod and Tube in CBM Wells, pp, 167-189

Qin Y. (1994): China’s High Rank Coal Petrology Characteristics and the Microstructure of Structure Evolution. XuZhou: China Mining University Press, , pp, 33-37.

Su X. B. (2003): Coal Brittle-ductile Deformation Identification Marks. Coal Geology & Exploration, vol. 31, no. 6. pp. 18-21.

Li T. L. (2000): The Measurement Analysis and Application on the Mechanical Property of Coal Seam. Geology and Prospecting, vol. 36, no. 2. pp. 85-88.

Ammosov I. I. (1954): Fracturing in coal. Moscow: IZDAT Publishers , pp. 109-109.

Han D. X. (1996): China Coal Petrography. East China Normal University Press, PP, 120-123,

Macrae J. C. (1954): The Incidence of Cleat Fracture in Some Yorkshire Coal Seams. Trans. Leeds. Geol. Assoc., no. 6. pp. 224-227.

Van D. W. (1981): Coal. Amsterdam: Elsevier Publishing Co., pp, 20-26.

Stach E. (1982): Stach’s Textbook of Coal Petrology, 3rd ed. Gebruder Borntraeger, Berlin Stuttgart, Germany, pp, 111-123.

Hu S. X. (2001): The Statistics of Discontinuities in Rock Mass in Underground Works and its Applications. Journal of Engineering Geology: vol. 9, no. 3. pp. 263-266,.

Kang L. J. (2000): Analysis on Breaking Structure Mechanics in Xingshan Mine No.15 layer. Coal Technology, vol. 19, no. 2. pp. 34-35.

Han C. F. (2003): The Familiar Structure Plane in Mine Production and the Identification of its Mechanic Property. Coal Technology, vol. 22, no. 3. pp. 91-92,.

Fu X. H., Qin Y. (2002): Study on Mechanics Experiments of Multiphase Medium Coal Rocks. Geological Journal of China Universitiesf. vol. 8, no. 4. pp. 446~452.

Wang Q. W., Su X. B. (2008): Controlling Effects of Rock Mass Structure on Coal-bearing Rock Series Deformation. Coal Geology of China, vol. 20, no. 9. pp. 18~22,.

Yang Q., Han D. X. (1979): China Coal Geology. China: Coal Industry Press, pp, 110-134.

Liu H. L. (2008): Coal Cleat System Characteristics and Formation Mechanisms in the Qinshui Basin. Acta Geologica Sinica, vol. 82, no. 10. pp. 1376-1381.

Harpalani S. (1991): Shrinkage of Coal Matrix with Release of Gas and its Impact on Permeability of Coal . Fue,l , vol. 69, no. 5. pp.551-556.

Harpalani S. (1984): The Effect of Gas Evacuation on Coal Permeability Test Specimens . Int. J. RockMech. Sc.i & Geomech., vol. 21, no. 3. pp. 361-364.

Dabbous M. K. (1974): The permeability of coal to gas and water. SPEJ, pp, 563-572.

Schwerer C. (1984): Pavone AM. Effect of Pressure Dependent Permeability on Well Test Analyses and Long Term Production of Methane from Coal Seams [R]. SPE12857, pp. 214-215.

Roberts S. B. (1994): A Debris Fflow Deposit in Alluvial Coal-bearing Faces, Bighorn Basin, Wyoming, USA: Evidence for Catastrophic Termination of Amire. International Journal of Coal Geology, no. 25. pp. 213-241.

Xu J. L. (2005): Establishment and Solution of Fluid/Solid Coupling Mathematical Model for Percolation of CBM . Natural Gas Industry, vol. 12, no. 5. pp. 67-71.

Ku K., Wang H. B. (2006): Study on Fluid Solid Coupling Seepage of Coal Gas Based on FEPG . China Science and Technology Information, No. 2, pp. 84-84.

Petro china Methane Co., Report on Dynamic Variation Characteristics of CBM Well Production and Monitoring Technology, pp. 1-6, 2001.