Non-Linear Dynamic Support Optimization Method for Non-Uniform Pressure Circular Tunnel Considering the Effect of Damage

Jump To References Section

Authors

  • Liang Chen
     State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology ,CN
  • Xianbiao Mao
     State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology, School of Mechanics and Civil Engineering, China University of Mining & Technology, 221116 ,CN
  • Peng Wu
     State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology, School of Mechanics and Civil Engineering, China University of Mining & Technology, 221116 ,CN

Keywords:

Elastoplastic solution; circular tunnel; nonlinear Hoek-Brown criterion; lateral pressure coefficient; ground response curve

Abstract

Based on non-linear Hoek-Brown criterion, a new approximate solution of deformation and plastic zone radius of circular tunnel is deduced under non-uniform pressure. In the plastic region, three different, Young’s modulus attenuation models are applied to solve the plastic zone deformation. The results show that the lateral pressure coefficient (LPC), dilatancy coefficient, buried depth and Young’s modulus attenuation exert important effects on the surrounding rock state. Under the influence of LPC, the radius and displacement of plastic zone show non-uniform variation; then, the maximum value of the ground response curve is gradually shifted from the side to the roof. With the burial depth and dilatancy coefficient increase, the surface displacement presents the non-linear increase characteristic. Besides, the influence of Young’s modulus on the plastic zone deformation is not only related to its attenuation model, but also closely related to the surface location and LPC of surrounding rock. Based on the above research, a non-linear dynamic support optimization method for non-uniform pressure circular tunnel is proposed.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-20

How to Cite

Chen, L., Mao, X., & Wu, P. (2022). Non-Linear Dynamic Support Optimization Method for Non-Uniform Pressure Circular Tunnel Considering the Effect of Damage. Journal of Mines, Metals and Fuels, 67(9), 403–415. Retrieved from https://informaticsjournals.co.in/index.php/jmmf/article/view/31649

Issue

Volume 67, Issue 9, September 2019

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

References

Savin, G.N. (1961): Stress concentration around holes.(Gros, E (translator)). Oxford, UK: Pergamon.

Detournay, E & Fairhurst, C. (1987): Two-dimensional elastoplastic analysis of a long cylindrical cavity under non-hydrostatic loading. Int. J. Rock Mech. Min. Sci., 24(4), 197-221.

Zhou Y, Lu A.Z, Kuang. L. (2013): Elastoplastic analysis on circle tunnels surrounding rock under Asymmetry load. Advanced Materials Research,Vols. 671-374, pp: 1091-1101.

Zhou. H, Kong. G.Q. (2016): A semi-analytical solution for cylindrical cavity expansion in elatic-perfectly plastic soil under biaxial in situ stress field.,1-12.

Zhao H. Z., Wang W. M., Wang L. (2013): Response models of weakly consolidated soft rock roadway under different interior pressures considering dilatancy effect. J. Cent. South Univ., (20): 3736-3744.

Hoek E, Brown ET. (1980): Empirical strength criterion for rock masses [J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE., 106(9): 1013- 1035.

Hoek E, Brown ET. (1980): Underground excavations in rock. London: Institution of Mining and Metallurgy.

Sharan, S.K. (2008): “Analytical solutions for stresses and displacements around a circular opening in a generalized Hoek–Brown rock.” Int. J. Rock Mech. Min. Sci., 45, 78-85.

Carranza-Torres, C., Fairhurst, C. (2000): “Application of convergence-confinement method of tunnel design to rock masses that satisfy the Hoek-Brown failure. “Tunnel. Undergr. Space Technol., 15 (2), 187-213.

Sharan, S.K. (2005): Exact and approximate solutions for displacements around circular openings in elasticbrittle- plastic Hoek-Brown rock. Int. J. Rock Mech. Min. Sci., 42, 542-549.

Park, K.H., Tontavanich, B., Lee, J.G. (2008): “A simple procedure for ground response curve of circular tunnel in elastic-strain softening rock masses.” Tunnel. Undergr. Space Technol., 23, 151-159.

Park, K.H., Kim, Y.J. (2006): “Analytical solution for a circular opening in an elastic-brittle-plastic rock.” Int. J. Rock Mech. Min. Sci., 43, 616-622.

Lee, Y.K., Pietruszczak, S. (2008): “A new numerical procedure for elasto-plastic analysis of a circular opening excavated in a strain-softening rock mass.” Tunnel. Undergr. Space Technol., 23, 588-99.

Wang, S.L., Yin, X.T., Tang, H., et al. (2010): “A new approach for analyzing circular tunnel in strainsoftening rock masses.” Int. J. Rock Mech. Min. Sci., 47, 170-178.

Chen, Ran., Tonon, F. (2011): “Closed-form solutions for a circular tunnel in elastic-brittle-plastic ground with the original and generalized Hoek-Brown failure criteria.” Rock. Mech. Rock. Eng.,44, 169-178.

Carranza-Torres C. (2004): Elasto-plastic solution of tunnel problem using the generalized form of the Hoek- Brown failure criterion. Int. J. Rock Mech. Min. Sci. Abstr., 41(3):480-1

Verman, M.; Singh, B.; Viladkar, M.N.; Jethwa, J.L. (1997): Effect of tunnel depth on modulus of deformation of rock mass. Rock Mech. Rock Eng., 30, 121-127.

Asef, M.R.; Reddish, D.J. (2002): The impact of confining stress on the rock mass deformation modulus. Geotechnique., 52, 235–241.

Brown, E.T.; Bray, J.W.; Santarelli, F.J. (1989): Influence of stress-dependent elastic moduli on stresses and strains around axisymmetric boreholes. Rock Mech. Rock Eng., 22, 189-203.

Zhang. Q, Jiang B.S, Wu X.S., Zhang. H.Q, Han L.J. (2012): Elasto-plastic coupling analysis of circular openings in elasto-brittle-plastic rock mass[J]. Theoretical and Applied Fracture Mechanics, 60: 60-67.

Nawrocki, P.A.; Dusseault, M.B.(1995): Modelling of damaged zones around openings using radiusdependent Young’s modulus. Rock Mech. Rock Eng.,

, 227-239. 22. Chen, X.; Tan, C.P.; Haberfield, C.M. (1999): Solutions for the deformations and stability of elastoplastic hollow cylinders subjected to boundary pressures. Int. J. Numer. Anal. Meth. Geomech., 23, 779-800.

Zhang, C.G.; Zhao, J.H.; Zhang Q.H, Hu, X.D. (2012): A new closed-form solution for circular openings modeled by the Unified Strength Theory and radiusdependent Young’s modulus. Comput. Geotech., 42, 118-128.

Ewy, R.T.; Cook, N.G.W. (1990): Deformation and fracture around cylindrical openings in rock- I. Observations and analysis of deformations. Int. J. Rock Mech. Min. Sci. Abstr., 27, 387-407.

Xu, Z.L. (2010): Elasticity, 4th ed.; Higher Education Press: Beijing, China, pp. 75-76; ISBN 978-7-04- 020213-7.

He, M.C.; Lu, X.J.; Jing, H.H. (2002): Characters of surrounding rock mass in deep engineering and its non-liner displacement-mechanical design concept. Chin. J. Rock Mech. Eng., 21, 1215-1224.

Zhao Z.H., Wang W.M., and Wang L, (2013): “Response models of weakly consolidated soft rock roadway under different interior pressures considering dilatancy effect,” Journal of Central South University, vol. 20, no. 12, pp. 3736-3744.