Study on Phase Sensitive Detection Technology of Multi-Frequency Signals in Electrical Logging

Jump To References Section

Authors

  • School of Electronic and Electrical Engineering, Baoji University of Arts and Science, Baoji 721016 ,CN

Keywords:

Electrical Logging, Multi-Frequency Signals, PSD.

Abstract

Based on the principle of phase sensitive detection (PSD) technology, the multi-frequency digital PSD algorithm is deduced to achieve the constrained relationship of sampling frequency, sampling number and signal frequency in the PSD of multi-frequency signals. The results of simulation experiment show that the amplitude detection error is controlled within 0.5% and the phase detection error is controlled within 0.2% when the signal to noise ratio (SNR) is as low as -10dB.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-22

How to Cite

Hou, Y. (2022). Study on Phase Sensitive Detection Technology of Multi-Frequency Signals in Electrical Logging. Journal of Mines, Metals and Fuels, 66(8), 478–481. Retrieved from https://informaticsjournals.co.in/index.php/jmmf/article/view/31744

Issue

Section

Articles

 

References

Zhang, L.H., Liu, G.Q., Zhou, C.C., Liu, Z.C. (2005): “Reservoir productivity prediction by array induction loggingdata.” Petroleum Explorationand Development, vol. 32, no. 3, pp. 84-87.

Wang, G. L., Zhang, G. J., Cui, F. X., Gao, F.(2003): “Application of staggered grid finite difference method to the computation of 3-D induction logging response.” Chinese Journal of Geophysics, vol. 46, no. 4, pp. 561-567.

Jia, Y., Wang, J. B., and Ji, C. Y. (2009): “Comparison, Improvement, and Implementation of FFT Permutation Algorithm.” Journal of University of Electronic Science and Technology of China, vol. 38, no. 2, pp. 292-295.

Li, X., Liu, F. and Long, T. (2010): “Efficient Implementation of Fixed-Point FFT on TS201, “Transactions of Beijing Institute of Technology, vol. 30, no. 1, pp. 88-91.

Atkin, B., and Orguner, U.H.A, (2008):”Phase-sensitive detection of motor fault signatures in the presence of Noise,” IEEE transactions on industrial electronics, vol. 55, no. 6, pp. 2539-2550, DOI: 10.1109/TIE.2008.921681

Su, R. J., Kong, L., and Shi, J. (2009): “Design and implementation of digital phase sensitive detection algorithm in the Logging instrument.” China Petroleum Machinery, vol. 37, no. 11, pp. 60-62.

Liang,S. S.,Qiao, F. B. and Zhang, Y. (2013): “Implementation of FPGA Based Digital Phase Sensitive Detection Algorithm.” Process Automation Instrumentation, vol. 34, no. 11, pp. 13-16, 2013.

Shulda, S. and Richards, R.M. (2016): “Chapter 5-Modulation Excitation Spectroscopy with Phase-Sensitive Detection for Surface Analysis.” New Maerials for Catalytic Application, pp. 121-132.

Li,K., Liu, B. P. and Zhang, J. T. (2011): “A study on the application of the digital phase sensitive detection in the well logging tools.” Petroleum Instruments, vol. 25, no. 1, pp. 35-38.

Kong, L., Shi, J., Xu, F. Y. and Liu, J. W. (2010): “DPSD Technique Application to Micro Conduction Image Logging Tool. “Instrument Technique and Sensor, no. 2, pp. 34-37.

Zhan, Y, Yu, Q., Wang, K.Yang,,F.,Kong, Y, and Zhao, X. (2015): “A high performance distributed sensor system with multi-intrusions simultaneous detection capability based on phase sensitive OTDR.” Opto-electronics Review, vol. 23, no. 3, pp. 187-194, DOI: 10.1515/oere-2015-0032

Cheng, D. F., Chen, J. Y., Yang. W. and Cai. S. S. (2015): “Application of Orthogonal Digital Phase-Sensitive Detection for Receiving System of PED.” Journal of Jilin University (Information Science Edition), vol. 33, no. 4, pp. 361-366.