A Comprehensive Review on Kenaf Fiber Reinforced Polymer Matrix Composites for Non-Structural Applications
Authors
-
Department of Mechanical Engineering, Sree Siddhartha Institute of Technology, Tumkur 572105, Karnataka ,IN
S. Chandrika -
Department of Mechanical Engineering, Sree Siddhartha Institute of Technology, Tumkur 572105, Karnataka ,INT. R. Hemantha Kumar
-
,INVishwas Mahesh
DOI:
https://doi.org/10.18311/jmmf/2023/34491Keywords:
Polymer composites, Kenaf fiber, Green composites, Composite propertiesAbstract
Due to renewable and environmental concerns, the creation of high-performance engineered goods created from natural resources is rising globally. Plant fibres are gaining popularity in polymer composites due to their environmental friendliness and lower cost than synthetic fibres. Because of its low density, Kenaf fibre offers superior specific characteristics than glass fibre as a reinforcement. Hence, development of composites for various applications plays a mojor role in industrial revolution. Kenaf plants, one of many distinct forms of natural resources, have been intensively exploited in recent years. As a result, this article provides an overview of recent advancements in the field of Kenaf fibre reinforced composites. Several essential challenges and future work proposals are highlighted, emphasizing the roles of material scientists and production engineers in ensuring the bright future of this novel “green” material through value addition to increase its use.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Kling S, Czigány T (2014): Damage detection and self-repair in hollow glass fiber fabric-reinforced epoxy composites via fiber filling. Compos Sci Technol 99:82–88. https://doi.org/ 10.1016/j.compscitech.2014.05.020
Wang Z, Xu L, Sun X, et al (2017): Fatigue behaviour of glassfiber- reinforced epoxy composites embedded with shape memory alloy wires. Compos Struct 178:311–319. https:// doi.org/10.1016/j.compstruct. 2017.07.027
Wambua P, Ivens J, Verpoest I (2003): Natural fibres: Can they replace glass in fibre reinforced plastics? Compos Sci Technol 63:1259–1264. https://doi.org/10.1016/S0266-3538(03)00096-4
Monteiro SN, Lopes FPD, Ferreira AS, Nascimento DCO (2009): Natural-fiber polymer-matrix composites: Cheaper, tougher, and environmentally friendly. Jom 61:17–22. https:/ /doi.org/10.1007/s11837-009-0004-z
Mahesh V, Joladarashi S, Kulkarni. Satyabodh M (2018): Experimental investigation on slurry erosive behaviour of biodegradable flexible composite and optimization of parameters using Taguchi’s approach. J Compos Adv Mater (Revue des Compos des Matériaux Avancés) 28:345–355. https://doi.org/doi:10.3166/rcma.28
Mahesh V, Joladarashi S, Kulkarni SM (2020): A comprehensive review on material selection for polymer matrix composites subjected to impact load. Def Technol 17:257–277
Mahesh V, Joladarashi S, Kulkarni SM (2019): An Experimental Investigation on Low-Velocity Impact Response of Novel Jute/Rubber Flexible Bio-Composite. Compos Struct 225:111190, 1–12. https://doi.org/https:// doi.org/10.1016/j.compstruct.2019.111190
Mahesh V, Joladarashi S, Kulkarni SM (2020): Damage mechanics and energy absorption capabilities of natural fiber reinforced elastomeric based bio composite for sacrificial structural applications. Def Technol 17:161–176. https:// doi.org/10.1016/j.dt.2020.02.013
Mahesh V, Joladarashi S, Kulkarni SM (2019): Development and mechanical characterization of novel polymer-based flexible composite and optimization of stacking sequences using VIKOR and PSI techniques. J Thermoplast Compos Mater 1–23. https://doi.org/https://doi.org/10.1177/ 0892705719864619
Mahesh V, Joladarashi S, Kulkarni SM (2019): An experimental study on adhesion, flexibility, interlaminar shear strength, and damage mechanism of jute/rubber-based flexible “green” composite. J Thermoplast Compos Mater 1–28. https://doi.org/https://doi.org/10.1177/0892705719882074
Mahesh V, Mahesh V, Puneeth K Influence of Areca Nut Nano Filler on Mechanical and Tribological Properties of Coir Fiber Reinforced Epoxy Based Polymer Composite. Sci Iran Trans Mech Eng. https://doi.org/10.24200/sci.2019.52083.2527
Mahesh V, Joladarashi S, Kulkarni SM (2018): Suitability study of jute-epoxy composite laminate for low and high velocity impact applications. AIP Conf Proc 1943:. https:// doi.org/10.1063/1.5029682
Mahesh V, Joladarashi S, Kulkarni SM (2019): Experimental Study on Abrasive Wear Behaviour of Flexible Green Composite Intended to Be Used as Protective Cladding for Structures. Int J Mod Manuf Technol XI:69–76
Ketabchi MR, Khalid M, Ratnam CT, Walvekar R (2016): Mechanical and thermal properties of polylactic acid composites reinforced with cellulose nanoparticles extracted from kenaf fibre. Mater Res Express 3:. https://doi.org/ 10.1088/2053-1591/3/12/125301
Liu Y, Ma Y, Che J, et al (2018): Natural fibre reinforced nonasbestos organic non-metallic friction composites: Effect of abaca fibre on mechanical and tribological behaviour. Mater Res Express 5:. https://doi.org/10.1088/2053-1591/aac1e0
Khalil AHPS, Masri M, Saurabh CK, et al (2017): Incorporation of coconut shell based nanoparticles in kenaf/ coconut fibres reinforced vinyl ester composites. Mater Res Express 4:. https://doi.org/10.1088/2053-1591/aa62ec
Patel VK, Chauhan S, Katiyar JK (2018): Physico-mechanical and wear properties of novel sustainable sour-weed fiber reinforced polyester composites. Mater Res Express 5:
Vignesh K (2018): Mercerization treatment parameter effect on coir fiber reinforced polymer matrix composite Mercerization treatment parameter effect on coir fi ber reinforced polymer matrix composite. Mater Res Express 5:
Mahesh V, Nilabh A, Joladarshi S, Kulkarni SM (2021): Analysis of Impact Behaviour of Sisal-Epoxy Composites under Low Velocity Regime. Rev des Compos des Matériaux Avancés
Mahesh V, Joladarashi S, Kulkarni S (2019): Investigation on effect of using rubber as core material in sandwich composite plate subjected to low velocity normal and oblique impact loading. Sci Iran Trans Mech Eng 26:897–907. https://doi.org/ 10.24200/sci.2018.5538.1331
Mahesh V, Joladarashi S, Kulkarni S (2017): Behaviour of Natural Rubber in Comparison with Structural Steel, Aluminium and Glass Epoxy Composite under Low Velocity Impact Loading. Mater Today Proc 4:10721–10728. https:// doi.org/10.1016/j.matpr.2017.08.019
Mahesh V, Joladarashi S, Kulkarni SM (2018): Modelling and Analysis of Material Behaviour under Normal and Oblique Low Velocity Impact. Mater Today Proc 5:6635–6644. https://doi.org/10.1016/j.matpr. 2017.11.319
Mahesh V, Joladarshi S, Kulkarni SM (2019): Comparative study on energy absorbing behaviour of stiff and flexible composites under low velocity impact. AIP Conf Proc 2057:020025–1 to 020025–6. https://doi.org/https://doi.org/ 10.1063/1.5085596
Mahesh V, Joladarashi S, Kulkarni SM (2020): Slurry erosive study and optimization of material and process parameters of single and hybrid matrix flexible composites using Taguchi approach. p 040033
Mahesh V, Joladarashi S, Kulkarni SM (2019): Physiomechanical and wear properties of novel jute reinforced natural rubber based flexible composite Physico-mechanical and wear properties of novel jute reinforced natural rubber based flexible composite. Mater Res Express 6:055503
Holbery J, Houston D (2006): Natural-fibre-reinforced polymer composites in automotive applications. J Miner Met Mater Soc 58:80–86. https://doi.org/10.1007/s11837-006-0234-2
S. Thomas, S. A. PaulL, A. Pothan BD (2011): Natural Fibres: Structure, Properties and Applications. In: Susheel Kalia, B. S. Kaith IK (ed) Cellulose Fibers: Bio- and Nano-Polymer Composites. Springer, Berlin, Heidelberg, pp 3–42
Nurazzi NM, Khalina A, Sapuan SM, Rahmah M (2018): Development of sugar palm yarn/glass fibre reinforced unsaturated polyester hybrid composites Development of sugar palm yarn/glass fi bre reinforced unsaturated polyester hybrid composites. Mater Res Express 5:
Judawisastra H, Sitohang RDR, Rosadi MS (2017) Water absorption and tensile strength degradation of Petung bamboo (Dendrocalamus asper) fiber – reinforced polymeric composites. Mater Res Express 4:. https://doi.org/10.1088/ 2053-1591/aa8a0d
Azghan MA, Eslami-farsani R (2018): The effects of stacking sequence and thermal cycling on the flexural properties of laminate composites of aluminium-epoxy/basalt-glass fibres. Mater Res Express 5:
Sapiai N, Jumahat A, Mahmud J (2018): Mechanical properties of functionalised CNT filled kenaf reinforced epoxy composites. Mater Res Express 5:. https://doi.org/10.1088/ 2053-1591/aabb63
Mahesh V, Mahesh V, Harursampath D (2021): Influence of alkali treatment on physio-mechanical properties of jute– epoxy composite. Adv Mater Process Technol 00:1–12. https://doi.org/10.1080/2374068X.2021.1934643
Sandeep Kumar, Patel V K, Mer KKS, Fekete Gusztav TS (2018): Influence of woven bast-leaf hybrid fiber on the physio-mechanical and sliding wear performance of epoxy based polymer composites. Mater Res Express 5:1–13. https://doi.org/doi.org/10.1088/2053-1591/aadbe6 Manuscript
Zini E, Focarete ML, Noda I, Scandola M (2007): Biocomposite of bacterial poly(3-hydroxybutyrate-co-3- hydroxyhexanoate) reinforced with vegetable fibers. Compos Sci Technol 67:2085–2094. https://doi.org/10.1016/ j.compscitech.2006.11.015
La Mantia FP, Morreale M (2011): Green composites: A brief review. Compos Part A Appl Sci Manuf 42:579–588. https:/ /doi.org/10.1016/j.compositesa.2011.01.017
Mahesh V, Joladarashi S, Kulkarni SM (2021): Three body abrasive wear assessment of novel jute/natural rubber flexible green composite. J Thermoplast Compos Mater 1–11. https:/ /doi.org/10.1177/08927057211017185
Mahesh V, Joladarashi S, Kulkarni SM (2021): Comparative study on ballistic impact response of neat fabric, compliant, hybrid compliant and stiff composite. Thin-Walled Struct 165:107986. https://doi.org/10.1016/j.tws.2021.107986
Nishimura A, Katayama H, Kawahara Y, Sugimura Y (2012): Characterization of kenaf phloem fibers in relation to stem growth. Ind Crops Prod 37:547–552. https://doi.org/https:// doi.org/10.1016/j.indcrop.2011.07.035
Karimi S, Tahir PM, Karimi A, et al (2014) Kenaf bast cellulosic fibers hierarchy: A comprehensive approach from micro to nano. Carbohydr Polym 101:878–885. https:// doi.org/https://doi.org/10.1016/j.carbpol. 2013.09.106
Ramesh M (2016): Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties. Prog Mater Sci 78–79:1–92. https://doi.org/https://doi.org/ 10.1016/j.pmatsci.2015.11.001
Rong M, Zhang M, Liu Y, et al (2001): The Effect of fiber Treatment on the Mechanical Properties of Unidirectional Sisal- Reinforced Epoxy Composites. Compos Sci Technol 61:1437–1447
MJ J, Anandjiwala R (2008): Recent Developments in Chemical Modification and Characterization of Natural Fiber-Reinforced Composites. Polym Compos 29:187–207
Kozlowski R, Wladyka-Przybylak M (2008): Flammability and Fire Resistance of Composites Reinforced by Natural Fibers. Polym Adv Technol 19:446–453
Kabir M, Wang H, Aravinthan T, et al (2011): Effects of Natural Fibre Surface on Composite Properties: A Review. In: 1st International Postgraduate Conference on Engineering, Designing and Developing the Built Environment for Sustainable Wellbeing. Brisbane, Australia
Célino A, Fréour S, Jacquemin F, Casari P (2014): The hygroscopic behaviour of plant fibers: A review. Front Chem 1:1–12 46. Xanthos M (2010): Functional Fillers for Plastics, 2nd ed. Wiley-VCH, Weinheim
Mwaikambo L (2009): Tensile Properties of Alkalised Jute Fibres. BioResources 4:566–588
Rasmussen L (2011): Controlled Enzyme Catalysed Heteropolysaccharide Degradation: Xylans. Ph.D. Thesis, Technical University of Denmark, Denmark
De Rosa IM, Santulli C, Sarasini F (2010): Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers. Mater Des 31:2397–2405. https://doi.org/10.1016/ j.matdes. 2009.11.059
Sathishkumar TP, Navaneethakrishnan P, Shankar S, et al (2013): Characterization of natural fiber and composites – A review. J Reinf Plast Compos 32:1457–1476. https://doi.org/ 10.1177/0731684413495322
Tong Y, Zhao S, Ma J, et al (2014): Improving cracking and drying shrinkage properties of cement mortar by adding chemically treated luffa fibres. Constr Build Mater 71:327– 333. https://doi.org/10.1016/j.conbuildmat.2014.08.077
Sahu P, Gupta MK (2017): Sisal (Agave sisalana) fibre and its polymer-based composites: A review on current developments. J Reinf Plast Compos 36:1759–1780. https:// doi.org/10.1177/0731684417725584
Yahaya R, Sapuan SM, Leman Z, Zainudin ES (2014): Selection of natural fibre for hybrid laminated composites vehicle spall liners using analytical hierarchy process (AHP). Appl Mech Mater 564:400–405. https://doi.org/10.4028/ www.scientific.net/AMM.564.400
Madeed-Al M, Labidi S (2014): Recycled polymers in natural fibre-reinforced polymer composites. In: Hodzic A, Shanks R (eds) Natural fibre composites. Woodhead Publishing Limited, pp 103–114
Yan L, Chouw N, Jayaraman K (2014): Flax fibre and its composites - A review. Compos Part B Eng 56:296–317. https://doi.org/10.1016/j.compositesb.2013.08.014
Rashdi AAA, Sapuan SM, Ahmad MMHM, Abdan KB (2009) Review of kenaf fiber reinforced polymer composites. Polimery/Polymers 54:777–780. https://doi.org/10.14314/ polimery.2009.777
Yahaya R, Sapuan S, Jawaid M, et al (2018): Review of Kenaf Reinforced Hybrid Biocomposites: Potential for Defence Applications. Curr Anal Chem 14:226–240
Ashori A, Harun J, Raverty W, Yusoff MNM (2006): Chemical and morphological characteristics of Malaysian cultivated kenaf (Hibiscus cannabinus) fiber. Polym - Plast Technol Eng 45:131–134. https://doi.org/10.1080/ 03602550500373782
INFO: KENAF. https://naturalfibersinfo.org/?page_id=85
Saba N, Tahir PM, Jawaid M (2014): A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites. Polymers (Basel) 6:2247–2273. https://doi.org/ 10.3390/polym6082247
Njuguna J, Pielichowski K, Desai S (2008): Nanofillerreinforced polymer nanocomposites. Polym Adv Technol 19:947–959. https://doi.org/10.1002/pat
Borba PM, Tedesco A, Lenz DM (2014) Effect of reinforcement nanoparticles addition on mechanical properties of SBS/Curauá fiber composites. Mater Res 17:412–419. https://doi.org/10.1590/S1516-14392013005000203
Vishwas M, Vinyas M, Puneeth K (2020): Infuence of areca nut nanofiller on mechanical and tribological properties of coir fibre reinforced epoxy based polymer composite. Sci Iran 27:1972–1981. https://doi.org/10.24200/sci.2019.52083.2527
Ramkumar R, Saravanan P (2020): Assessment of Composites using Waste Sugarcane Bagasse Fibre and Wood Dust Powder. Int J Innov Technol Explor Eng 9:2126–2131. https://doi.org/ 10.35940/ijitee.e3016.039520
Gulitah V, Liew KC (2019): Morpho-mechanical properties of wood fiber plastic composite (WFPC) based on three different recycled plastic codes. Int J Biobased Plast 1:22–30. https://doi.org/10.1080/24759651.2019.1631242.
