Enhancement Mechanical Properties of CI200 Material using Magnetic Field

Jump To References Section

Authors

  • Mohnesh Dnyaneshwar Mandhre
     Research Scholar, Dr. Vithalrao Vikhe Patil College of Engineering, Ahmednagar - 414001, Maharashtra ,IN
  • Sachin Ghalme
     Associate Professor, Department of Mechanical Engineering, Sandip Institute of Technology and Research Centre, Nashik - 422213, Maharashtra ,IN

DOI:

https://doi.org/10.18311/jmmf/2023/41765

Keywords:

Casting, CI200, Magnetic field, Mechanical Property

Abstract

The casting method is one of the primogenital methodologies involving squeezing and jolting the green sand used as molding material and further was established with the use of binders such as clay or organic resin. The constant search for innovative molding material leads to the magnetic process parameters i.e. magnetic field. The preliminary trials on one of the process parameter i.e. magnetic field were carried out and the input parameter for the magnetic mold was optimized. In this work CI200 cast iron has been used for the melting casting route using a furnace and the molten metal is poured into a magnetic mold in terms of altering voltage 60 Volts, 100 Volts, and 150 Volts provide to mold. CI200 casting in magnetic mold and also the espousal of magnetic field for boosted mechanical property. The CI200 casting produced from the magnetic mold was subjected to mechanical tests i.e. strength and Percentage elongation and data compared with the casting of the same composition made in sand casting. It observed that the tensile strength of CI 200 was found that 137.2424 MPa without magnetic field and with magnetic field 195.5463 MPa for 60 Volts, 216.3047 MPa for 100 Volts, and 237.3373 MPa for 150 Volts respectively the tensile strength obtained from CI200 casting made in an increasing magnetic field increase tensile strength The result suggests that casting of magnetic mold material will higher properties as compared to conventional sand casting material.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-12-01

How to Cite

Mandhre, M. D., & Ghalme, S. (2023). Enhancement Mechanical Properties of CI200 Material using Magnetic Field. Journal of Mines, Metals and Fuels, 71(12), 2747–2750. https://doi.org/10.18311/jmmf/2023/41765

Issue

Volume 71, Issue 12, December 2023

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Basavarajappa VN, Niranjan HB and Manjunatha V. Innovative casting using magnetic materials. International Journal of Engineering Researches and Management Studies. 2017 March; 3(2):82-88.

Ranjit JS, Trushar BG. Numerical analysis on the flow of molten steel in the casting cavity in the presence of magnetic field. Elsevier Ltd. 2021; 356-361. DOI: https://doi.org/10.1016/j.matpr.2020.09.743

Chen L, Li J, Zhao Y, Li M, Li L, Chen L, Hou H. Numerical simulation and optimization of indirect squeeze casting process. Engineered Science Eng. 2021; 13:65-70. DOI: https://doi.org/10.30919/es8d1157

Amir HI, Abdel-Hamid IM. Conventional stir casting versus ultrasonic assisted stir casting process: Mechanical and physical characteristics of AMCs. Journal of Alloys and Compounds. 2019.

Kumar A, Kumara S. Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites. 2018 September; 6(3):245-254. DOI: https://doi.org/10.1016/j.jma.2018.05.006

Apparaoa K, Birrub AK. Optimization of die casting process based on Taguchi approach. Science Direct Materials. 2017; 4:1852-1859. DOI: https://doi.org/10.1016/j.matpr.2017.02.029

Kumar A, Singh RC, Chaudhary R. Recent progress in production of metal matrix composites by stir casting process: An overview. International Conference on Mechanical and Energy Technologies Materials. 2019 August; 14:656-668.

Vairamuthu J, Stalin B, Sivakumar GD, Fazil DM, Balaji R, Natarajan VA. The effects of process parameters for synthesized copper metal matrix using stir casting process. Materials Today. 2010.

Mehrdad S, Beitallah E, Behzad N. Synthesis of AA2024- (SiO2np+TiO2np) hybrid nano composite via stir casting process. Materials Science and Engineering. 2019

Hortense LF, Florian B, Studart AR. Design of textured multi-layered structures via magnetically assisted slip casting. Soft Matter. 1-19.

Hiromi N, Shohei F, Motohiro Y, Tohru SS, Hitoshi O. Fabrication and anisotropic electronic property solid solution by slip casting in a high magnetic field. Elsevier. 2017.

Jia Y, Xingrui C, Qichi L, Hang W, Lei B. Macro-physical field of large diameter magnesium alloy billet electro-magnetic direct-chill casting: A comparative study. Science Direct Journal of Magnesium and Alloys. 2020; 7(3):716-730. DOI: https://doi.org/10.1016/j.jma.2020.03.006

Ambrish M, Rajneesh K, Jha PK. Simulation of electromagnetic field and its effect during electromagnetic stirring in continuous casting mold. Journal of Manufacturing Processes. 2020; 596-607. DOI: https://doi.org/10.1016/j.jmapro.2020.11.003

Niksiar P, Michael BF, Mckittrick J, Michael MP. Microstructural evolution of paramagnetic materials by magnetic freeze casting. Elsevier. 2018.

Yonghui J, Xingrui C, Qichi L, Hang W, Weitao J. Numerical study on action of HMF, PMF, DHMF, and DPMF on molten metal during electromagnetic casting. The International Journal of Advanced Manufacturing Technology. 2019.