Study on Influence of Process Parameters on Surface Roughness in CNC Milling Operation

Jump To References Section

Authors

  • Shailesh
     Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore – 560054, Karnataka ,IN
  • K. Lokesha
     Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore – 560054, Karnataka ,IN
  • Bijayalakshmi Das
     Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore – 560054, Karnataka ,IN
  • N. Harish
     Department of Mechanical Engineering, M S Ramaiah Institute of Technology, Bangalore – 560054, Karnataka ,IN

DOI:

https://doi.org/10.18311/jmmf/2023/43181

Keywords:

Analysis of Variance, Process Parameter, Surface Roughness, Taguchi, Wet Cutting Condition.

Abstract

Machine tools are a vital element in engineering manufacturing environment. It assists in the supply of products and components that meet the highest possible standards. An experimental approach was administered to evaluate the factor affecting surface finish in milling operation performed on ferrous material under wet cutting condition. Laboratory inspection was initiated to assess the effect of process parameters on surface finish. Cost effective experimental trials combining speed, feed and depth of cut were formulated using Taguchi L9 orthogonal array. The significant factor influencing surface topography was analyzed using analysis of variance (ANOVA) tool. The examination divulges that the surface roughness was found to be maximum at the lower levels of process meters in the milling process on mild steel material. The ANOVA depicts the process parameter which is greatly contributing to the surface texture.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2024-05-24

How to Cite

Shailesh, Lokesha, K., Das, B., & Harish, N. (2024). Study on Influence of Process Parameters on Surface Roughness in CNC Milling Operation. Journal of Mines, Metals and Fuels, 71(12A), 447–450. https://doi.org/10.18311/jmmf/2023/43181

Issue

Volume 71, Issue 12A , 2023

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Ali MH, Khidhir BA, Ansari MNM, Mohamed B. FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy. HBRC Journal. 2013; 9(3):263-9. https://doi.org/10.1016/j. hbrcj.2013.05.003 DOI: https://doi.org/10.1016/j.hbrcj.2013.05.003

Arokiadass R, Palaniradja K, Alagumoorthi N. Prediction and optimization of end milling process parameters of cast aluminium based MMC. Transactions of Nonferrous Metals Society of China. 2012; 22(7):1568-74. https://doi. org/10.1016/S1003-6326(11)61357-5 DOI: https://doi.org/10.1016/S1003-6326(11)61357-5

Prasad Babu GHV, Murthy BSN, Venkata Rao K, Adarsh Kumar K. Taguchi based optimization of process parameters in orthogonal turn milling of ASTM B139. Materials Today: Proceedings. 2017; 4(2):2147-56. https://doi. org/10.1016/j.matpr.2017.02.061 DOI: https://doi.org/10.1016/j.matpr.2017.02.061

Kosaraju S, Chandraker S. Taguchi analysis on cutting force and surface roughness in turning MDN350 steel. Materials Today: Proceedings. 2015; 2(4-5): 3388-93. https://doi. org/10.1016/j.matpr.2015.07.313 DOI: https://doi.org/10.1016/j.matpr.2015.07.313

Satheesh Kumar N, Shetty A, Shetty A, Ananth K, Shetty H. Effect of spindle speed and feed rate on surface roughness of carbon steels in CNC turning. Procedia Engineering. 2012; 38:691-7. https://doi.org/10.1016/j. proeng.2012.06.087 DOI: https://doi.org/10.1016/j.proeng.2012.06.087

Kumar S, Saravanan I, Patnaik L. Optimization of surface roughness and material removal rate in milling of AISI 1005 carbon steel using Taguchi approach. Materials Today: Proceedings. 2020; 22:654-8. https://doi.org/10.1016/j. matpr.2019.09.039 DOI: https://doi.org/10.1016/j.matpr.2019.09.039

Pang JS, Ansari MNM, Zaroog OS, Ali MH, Sapuan SM. Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT/Al/Ep) hybrid composite. HBRC Journal. 2014; 10(2):138-44. https://doi. org/10.1016/j.hbrcj.2013.09.007 DOI: https://doi.org/10.1016/j.hbrcj.2013.09.007

Rawangwong S, Chatthong J, Boonchouytan W, Burapa R. Influence of cutting parameters in face milling semi-solid AA 7075 using carbide tool affected the surface roughness and tool wear. Energy Procedia. 2014; 56:448-57. https:// doi.org/10.1016/j.egypro.2014.07.178 DOI: https://doi.org/10.1016/j.egypro.2014.07.178

Sharma A, Dwivedi V. Effect of milling parameters on surface roughness: An experimental investigation. Materials Today: Proceedings. 2020; 25:868-71. https://doi. org/10.1016/j.matpr.2019.11.256 DOI: https://doi.org/10.1016/j.matpr.2019.11.256

Tomadi SH, Ghani JA, Che Haron CH, Hassan MA, Daud R. Effect of cutting parameters on surface roughness in end milling of AlSi/AlN metal matrix composite. Procedia Engineering. 2017; 184:58-69. https://doi.org/10.1016/j. proeng.2017.04.071 DOI: https://doi.org/10.1016/j.proeng.2017.04.071

Kıvak T. Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts. Measurement. 2014; 50:19-28. https://doi.org/10.1016/j.measurement. 2013.12.017 DOI: https://doi.org/10.1016/j.measurement.2013.12.017

Wu X, Yin X. Surface roughness analysis and parameter optimization of mold steel milling. Procedia CIRP. 2018; 71:317-21. https://doi.org/10.1016/j.procir.2018.05.032 DOI: https://doi.org/10.1016/j.procir.2018.05.032

Zahaf MZ, Benghersallah M. Surface roughness and vibration analysis in end milling of annealed and hardened bearing steel. Measurement: Sensors. 2021; 13:1-11. https:// doi.org/10.1016/j.measen.2020.100035 DOI: https://doi.org/10.1016/j.measen.2020.100035