Evaluation and Comparison of Efficacy of 5.25% Sodium Hypochlorite and UV Rays for Disinfecting Polyvinyl Siloxane and Polyether Monophase Impression Material: An in vivo Study

Jump To References Section

Authors

  • Neha Prakash
     Post Graduate, Department of Prosthodontics, Crown and Bridge and Implantology, Modern Dental College and Research Center, Indore – 453112, Madhya Pradesh ,IN
  • Rajeev Srivastava
     Head and Professor, Department of Prosthodontics, Crown and Bridge and Implantology, Modern Dental College and Research Center, Indore – 453112, Madhya Pradesh ,IN
  • Apurva Pathak
     Professor, Department of General Pathology and Microbiology, Modern Dental College and Research Centre, Indore – 453112, Madhya Pradesh ,IN
  • Umesh Palekar
     Professor, Department of Prosthodontics, Crown & Bridge and Implantology, Rural Dental College, Loni - 413736, Maharastra ,IN
  • Vivek Choukse
     Professor, Department of Prosthodontics, Crown and Bridge and Implantology, Modern Dental College and Research Centre, Indore – 453112, Madhya Pradesh ,IN
  • Ankita Parmar
     Lecturer, Department of Prosthodontics, Crown and Bridge and Implantology, Vaidik Dental College and Research Centre, Daman, Gujurat ,IN

DOI:

https://doi.org/10.18311/jpfa/2020/24453

Keywords:

Impression Material, Polyvinyl Siloxane, Polyether, Sodium Hypochlorite, UV rays
Prosthodontics

Abstract

Aim: To evaluate the efficacy of 5.25% Sodium hypochlorite, UV rays for disinfecting Polyether Monophase and Polyvinyl monophase impression material. Materials and Methods: Ten healthy dentulous subjects irrespective of gender were selected. For each dentulous subject four impressions of maxillary arch were made with Polyvinyl siloxane and Polyether monophase impression material. First impression was kept as control. Second impression was disinfected with 5.25% sodium hypochlorite for 10 minutes. Third impression was disinfected by exposing it to UV light (A and B) for 3 minutes and fourth impression was disinfected by exposing it to UV light (A and B) for 10 minutes. The colony was observed based on standard method and technique under binocular microscope and the growth in broth were observed based on their turbidity with the help of colorimeter. Result: The intergroup comparison was done by using ANOVA test while the comparison between two groups was done by using paired t test. Conclusion: In this study sodium hypochlorite was found to be more effective in killing microorganisms than UV rays as it kills only surfaces microbes.

Downloads

Published

2020-04-16

How to Cite

Prakash, N., Srivastava, R., Pathak, A., Palekar, U., Choukse, V., & Parmar, A. (2020). Evaluation and Comparison of Efficacy of 5.25% Sodium Hypochlorite and UV Rays for Disinfecting Polyvinyl Siloxane and Polyether Monophase Impression Material: An in vivo Study. Journal of Pierre Fauchard Academy (India Section), 34(1), 1–8. https://doi.org/10.18311/jpfa/2020/24453

Issue

Volume 34, Issue 1, March 2020

Section

Original Articles

License

All the articles published in JPFA are distributed under a creative commons license. The journal allows the author(s) to hold the copyright of their work (all usages allowed except for commercial purpose).

 

References

Pandey A, Mehtra A. Comparative study of dimensional stability and accuracy of various elastomeric materials. IOSR Journal of Dental and Medical Sciences. 2014; 13(3):40–45.

https://doi.org/10.9790/0853-13354045

Mohammad TAL, Yasiri IKA, Hamed SJ. Disinfection of alginate and silicon impressions by using UV and blue light. (In Vivo Study). Journal of Kufa for Nursing Science. 2013; 3(2):1–8.

Taylor RL, Wright PS, Maryan C. Disinfection procedures: Their effect on the dimensional accuracy and surface quality of irreversible hydrocolloid impression materials and gypsum casts. Dental Material. 2002; 18: 103–110. https://doi.org/10.1016/S0109-5641(01)00027-6

Palenik CJ, Burke FJ, Miller CH. Strategies for dental clinic infection control. Dent Update. 2000; 27(1): 7–10. https://doi.org/10.12968/denu.2000.27.1.7. PMid:11218267

Silva SM, Salvador MC. Effects of the disinfection technique on the linear dimensional stability of dental

impression materials. J Appl Oral Sci. 2004; 12(3):244–249. https://doi.org/10.1590/S1678-77572004000300016. PMid: 21049261

Watkinson AC. Disinfection of impressions in UK Dental Schools. Br Dent J. 1988; 164(1):22–23. https://doi.org/10.1038/sj.bdj.4806325. PMid:3276345

Leung RL, Schonfeld SE. Gypsum casts as a potential source of microbial cross-contamination. J Prosthet Dent. 1983; 49(2):210-211. https://doi.org/10.1016/00223913(83)90503-6

Duseja S, Shah RJ, Shah DS, Duseja S. Dimensional measurement accuracy of recent polyether and addition silicone monophase impression materials after immersion in various disinfectants: An in vitro study. International J. Healthcare and Biomedical Research.2014; 2(4): 87–97.

Herrera SP, Merchant VA. Dimensional stability of dental impressions after immersion disinfection. J Am Dent Assoc. 1986 ;113(3):419–422. https://doi.org/10.14219/jada.archive.1986.0214. PMid:3093552

Soganci G, Cinar D, Cagler A. Yagiz A. 3D evaluation of the effect of disinfectant on dimensional accuracy and stability of two elastomeric impression materials. Dental Materials Journal. 2018; 37(4):675–684. https://doi.org/10.4012/dmj.2017-097. PMid:29848853

Yilmaz H, Aydin C, Dogruman F, Gul B, Yilmaz C, Semiz M. Effect of disinfection on the dimensional stability of polyether impression material. J. Prosthodont. 2007; 16(6):473–479.

https://doi.org/10.1111/j.1532-849X.2007.00235.x. PMid:17760866

Walker MP, Rondeau M, Petrie C, Tasca A, Williams K. Surface quality and long term dimensional stability of current elastomeric impression materials after disinfection. J Prosthodont. 2007; 16(5):343–351. https://doi.org/10.1111/j.1532-849X.2007.00206.x. PMid:17559536

Look JO, Clay DJ, Gong K, Harold HM. Preliminary results from disinfection of irreversible hydrocolloid impressions. J. Prosthet. Dent. 1990; 63(6):701–707. https://doi.org/10.1016/0022-3913(90)90329-B

Anand V. A comparative evaluation of disinfection effect of exposures to ultra-violet light and direct current glow discharge on Candida Albicans colonies coated over elastomeric impression material: An in vitro study. Dental Science. 2013; 5(5):80–84. https://doi.org/10.4103/09757406.113302 PMid:23946583 PMCid:PMC3722712

Godbole SR, Dahane TM, Patidar NA, Nimonkar SU. Evaluation of the effect of ultraviolet disinfection on dimensional stability of the polyvinyl siloxane impressions- an in vitro study. J Clin Diagn Res. 2014; 8(9):73–76.