Design and Analysis of Straight and Curved Fins

Jump To References Section

Authors

  • J. V. Bhanuteja
     Department of Mechanical Engineering, ANITS, A.P. ,IN
  • S. Gowtham
     Department of Mechanical Engineering, ANITS, A.P. ,IN
  • V. Harish Naidu
     Department of Mechanical Engineering, ANITS, A.P. ,IN
  • V. Jaya Krishna
     Department of Mechanical Engineering, ANITS, A.P. ,IN
  • A. Raviteja
     Department of Mechanical Engineering, ANITS, A.P. ,IN
  • M. Manish
     Department of Mechanical Engineering, ANITS, A.P. ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31042

Keywords:

Heat Sink, Fins, Temperature Distrubustion and Heat Flux.

Abstract

A series of fins commonly known as heat sinks are adapted in various thermal appliances the computer and other electronic systems, where large chunks of heat generated have to be dissipated. This project is mainly concerned with developing unconventional fins as a substitute to the conventional rectangular fins.

Heat Transfer analysis of curved  fins was carried out  in this work which can be a substitute for a normal rectangular fins as heat sinks. A detailed evaluation of temperature distribution and heat flux rates with heat sinks made up of curved fins is accomplished and compared with the rectangular fins. This objective was fulfilled for three different  types of materials  mainly copper, aluminium , magnesium. The entire project was done using CATIA platform for modelling and ANSYS for finite element analysis.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

Bhanuteja, J. V., Gowtham, S., Harish Naidu, V., Jaya Krishna, V., Raviteja, A., & Manish, M. (2023). Design and Analysis of Straight and Curved Fins. Journal of Mines, Metals and Fuels, 70(10A), 23–31. https://doi.org/10.18311/jmmf/2022/31042

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Copyright (c) 2023 Journal of Mines, Metals and Fuels

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Mayank Jain, Heat Transfer Analysis And ptimization Of Fins By Variation In Geometry, IJMPE, Issn: 2320-2092, Vol 5, Issue-7, July 2017.

Pardeep Singh, Design and Analysis For Heat Transfer Through Fin With Extensions, IJIRSET, Issn:2319-8753

Devendra J., Effect Of Geometry, Material And Thickness Of Fin On Engine Cylinder Fins, IRJET, Volume: 04 Issue: 07 | July-2017

Mr. Omkarnakadi, Mr. Nitish I Hukkeri, Mr. Jotibabelgaonkar, Effect Of Different Fin Geometries On Heat Transfer Coefficient, IJSER, Volume 7, Issue 7, July 2016 1078 Issn 2229-5518

K. Sathishkumar, Computational analysis of heat transfer through fins with different types of notches, IJAERS, Vol4, Issue-2, Feb-2017. DOI: https://doi.org/10.22161/ijaers.4.2.35

Charan, Srivastav, Bharadwaj, “Thermal Analysis On Rectangular Plate Fin with Perforations Using Ansys”, IJCRT, 2018.

Sangaj, Shinde, Shanediwan, Potdar, Suryawanshi, “Thermal and Parametric Analysis of Pin-Fin”, IRJET, Vol.05, Issue 02, Feb-2018.

Kiran Beldar, Avinash Patil, “Design and Analysis of cylinder having longitudinal fins with rectangular notches”, IJSDR, 2017.

Rajesh, Design and optimization of engine cylinder fins by varying Geometry and material with thermal analysis, IJCEM, 2017.

Mayankjain, “heat transfer analysis and optimization of fins by Variation in geometry”, IJMPE, Vol.5, Issue-7, Jul. 2017.