Volume 70, Issue 10A, October 2022

Articles

• Measuring Deformation of Deep Drawing of Various Alloys by Image Processing Using Matlab

  T. Prabaharan, P. Periyaswamy, V. Mugendiran, A. Bovas Herbert Bejaxhin (Author)

  1-8

  Keywords:

  Deep Drawing, Strain, Deformation, Image Processing, Matlab, Alloys.

  • PDF ¹⁰²

  Abstract views: 139 times| Download: 102 times| https://doi.org/10.18311/jmmf/2022/31039

• Design and Analysis of Artificial Heart Model by Using Finite Element Analysis

  Manjunath LH, Karthick V (Author)

  9-16

  • PDF ⁷⁸

  Abstract views: 89 times| Download: 78 times| https://doi.org/10.18311/jmmf/2022/31040

• Analysis of Connecting Rod Made by Using Micro Si₃N₄ Particulates Reinforced with Al2024 Alloy

  Rachepalli Nochitha, Pramodkumar S Kataraki, Dharshan K, A F Zubair, Ayub Ahmed Janvekar (Author)

  17-22

  • PDF ⁶⁹

  Abstract views: 106 times| Download: 69 times| https://doi.org/10.18311/jmmf/2022/31041

• Design and Analysis of Straight and Curved Fins

  J. V. Bhanuteja, S. Gowtham, V. Harish Naidu, V. Jaya Krishna, A. Raviteja, M. Manish (Author)

  23-31

  Keywords:

  Heat Sink, Fins, Temperature Distrubustion and Heat Flux.

  • PDF ¹³³

  Abstract views: 119 times| Download: 133 times| https://doi.org/10.18311/jmmf/2022/31042

• Design and Optimiozation of Front A – Arm Suspension System for Speciqal Purpose Electric Vehicle

  Bibin N. Baby, Niranjan Hiremath (Author)

  32-36

  • PDF ⁶⁹

  Abstract views: 92 times| Download: 69 times| https://doi.org/10.18311/jmmf/2022/31044

• Design and Analysis of Automated Scum Removal and Filtering System for Jaggary Plant

  Praveenkumara B M, Rajesh Kumbara S K, Bhanu Prakash M J, Pranav G Bhat (Author)

  37-42

  Keywords:

  Scum Removal, Jaggery.

  • PDF ⁷⁸

  Abstract views: 99 times| Download: 78 times| https://doi.org/10.18311/jmmf/2022/31045

• Lower Wishbone Modeling and Analysis for Commercial Vehicle Independent Suspension System

  T. Prabaharan, A. Bovas Herbert Bejaxhin, P. Periyaswamy, N. Ramanan, K. Ramkumar, Chandramohan P (Author)

  43-47

  Keywords:

  Wishbone Arm, Independent Suspension, Finite Element Analysis, ANSYS Software.

  • PDF ¹⁰⁰

  Abstract views: 118 times| Download: 100 times| https://doi.org/10.18311/jmmf/2022/31046

• Dynamic Mechanical Analysis on Jute Fiber Reinforced Polymer Composites for Patella Implant

  Chennabasappa Hampali, Basawaraj ., Vishwanath Koti, Jegadeeswaran N, Basavaraju S (Author)

  48-54

  • PDF ⁹⁹

  Abstract views: 303 times| Download: 99 times| https://doi.org/10.18311/jmmf/2022/31049

• Microstructure Characteristics and Properties of NiCrMoFeCoAl-30%Cr₃C₂ HVOF Coating on T22 Boiler Tube Steel

  Viresh G Patil, B. Somasundaram, Sakthivel Kandaiah, N. Jagadeeswaran (Author)

  55-60

  Keywords:

  HVOF Composite Coating, SEM/EDS Technique. Microhardness, Porosity.

  • PDF ⁷⁴

  Abstract views: 105 times| Download: 74 times| https://doi.org/10.18311/jmmf/2022/31051

• Microstructure Characteristics and Properties of NiCrMoFeCoAl-30%SiO₂ Composite Coating on T22 Boiler Tube Steel

  Viresh G Patil, B. Somasundaram, Sakthivel Kandaiah (Author)

  61-66

  Keywords:

  SEM/EDS Technique, Thermal Spraying.

  • PDF ⁶⁶

  Abstract views: 76 times| Download: 66 times| https://doi.org/10.18311/jmmf/2022/32754

• Evaluation and Comparison of Fracture Toughness of Glass Fibre Reinforce Composites

  Nikhil Rangaswamy, Shivakumar S, Shriranganath P. Avadhani, Manjunath G A (Author)

  67-73

  • PDF ⁸⁹

  Abstract views: 86 times| Download: 89 times| https://doi.org/10.18311/jmmf/2022/31053

• A Review on Erosion of Aluminium Alloy for Various Application

  Sujeet Magi, C. M. Ramesha, Rajendra P, Mohanraju S (Author)

  74-80

  Keywords:

  Alloys, Corrosion Resistance, Structural Aluminium Alloys, Aircraft, Solid Particle Erosion (SPE).

  • PDF ¹¹⁷

  Abstract views: 207 times| Download: 117 times| https://doi.org/10.18311/jmmf/2022/31054

• Design and Analysis of Hose Clamp

  Ramesh Kumar S C, Sunil Kumar S Tembad, Vikhyath P, Vishal J P, Shaik Shashavali (Author)

  81-83

  Keywords:

  Bending Stress, Section Band Clamp, Rigid Cylinder.

  • PDF ⁹²

  Abstract views: 173 times| Download: 92 times| https://doi.org/10.18311/jmmf/2022/31055

• A Critical Review on Nanoparticle Filled Adhesives for Structural Applications

  Hanumantharaya R, Prem Kumar B.G., Ajit B.S. (Author)

  84-89

  Keywords:

  Nanoparticles, Adhesives, Structural Application.

  • PDF ⁸³

  Abstract views: 154 times| Download: 83 times| https://doi.org/10.18311/jmmf/2022/31056

• Statical Significant Analysis of Hardness of Poly Vinyl Alcohol Crosslinked Glutaraldehyde Using Tukey HSD Method

  Nagamadhu M, Sachinkumar Patil (Author)

  90-96

  Keywords:

  Glutaraldehyde, Polyvinyl Alcohol, Hardness, Tukey HSD Method, Crosslinking.

  • PDF ⁷⁹

  Abstract views: 98 times| Download: 79 times| https://doi.org/10.18311/jmmf/2022/31057

• Grain Growth Inhibition by Second Phase Particles : A Two-Dimensional Monte Carlo Computational Study

  P. Rajendra, K. R. Phaneesh, C M Ramesha, Madev Nagaral, V Auradi (Author)

  97-103

  Keywords:

  Q-States, Second Phase Particles, Matrix Size, Grain Size Distribution, Zener Limit, and Scaling Constant.

  • PDF ⁶³

  Abstract views: 75 times| Download: 63 times| https://doi.org/10.18311/jmmf/2022/31059

• Biodegradable Nano-Cellulose and its Composite Materials for Food Packaging Applications : A Review

  Rajeshwari Halagalimath, Jyothilakshmi R, Nagaraju Kottom (Author)

  104-111

  • PDF ¹⁰⁶

  Abstract views: 114 times| Download: 106 times| https://doi.org/10.18311/jmmf/2022/31060

• Performance and Comparison of Coated and Uncoated Tool Inserts in Machining of C45 Steel

  Puneeth Kumar N, Srikantappa A S, Manjunatha B, Anilkumar ., Amruth Y, Nelakruthi Manoj, Harshavardhan . (Author)

  112-118

  Keywords:

  C45 Steel, Temperature, Wear Surface and SEM T.

  • PDF ⁷⁴

  Abstract views: 62 times| Download: 74 times| https://doi.org/10.18311/jmmf/2022/31210

• Comparative Testing of Tensile, Flexural and Impact Analysis on Coated and Uncoated Kenaf Fiber Reinforced Composite

  T. Prabaharan, A. Bovas Herbert Bejaxhin, S. Kamatchi Sankaran, N. Ramanan, Jenaris D.S (Author)

  119-129

  Keywords:

  Composite Materials, Kenaf Fiber, Impact Testing, Hydrogenperoxide.

  • PDF ⁹⁰

  Abstract views: 105 times| Download: 90 times| https://doi.org/10.18311/jmmf/2022/31211

• Wear Analysis and Experimentation of Sintered Al-SiCp and Al-B₄Cp Composites with Deformation Predictions

  T. Prabaharan, A. Bovas Herbert Bejaxhin, S. Dhanabalan, N. Ramanan, Dilli Babu R (Author)

  130-135

  Keywords:

  Powder Metallurgy, Sintering, Pin-on-Disc-Machine, Wear.

  • PDF ⁸⁴

  Abstract views: 66 times| Download: 84 times| https://doi.org/10.18311/jmmf/2022/31213

• Strain-Cum-Deformation Analysis of Friction Stir Welded AA5052 and AA6061 Samples with Microstructural Analysis

  T. Prabaharan, M.B.S. Sreekara Reddy, A. Bovas Herbert Bejaxhin, Ramanan ., Pothamsetty Kasi V, Jenaris . (Author)

  136-146

  Keywords:

  Friction Stir Welding, Duplex Stainless Steel, PDZ, ERD, FWTPET.

  • PDF ¹²¹

  Abstract views: 119 times| Download: 121 times| https://doi.org/10.18311/jmmf/2022/31214

• ZnO Polymer Nano Composites Synthesis, Characterization, and Thermo-Mechanical Property Comparison

  J.C. Chrislin Mario, Y. Christabel Shaji, Y. Brucely, S. Ajith Sinthuja, A. Bovas Herbert Bejaxhin, N. Ramanan (Author)

  147-154

  Keywords:

  Polyester Resin, Polymer ZnO Nano Composites, Pure Polyester Sheet, Thermal, Mechanical Properties, Dielectric Spectroscopy, Hydrophobic Character.

  • PDF ⁹³

  Abstract views: 116 times| Download: 93 times| https://doi.org/10.18311/jmmf/2022/31218

• Design and Analysis of Material Handling System

  Likhith M, Deepak S A (Author)

  155-163

  Keywords:

  Material Handling System, Head Expander and Vibrating Machine, Solid Works 3D Cad Software, ANSYS WORKBENCH Software, Static and Dynamic Analysis, Mild Steel Material.

  • PDF ¹⁰⁷

  Abstract views: 100 times| Download: 107 times| https://doi.org/10.18311/jmmf/2022/31220

• Value Stream Mapping- Tool to Optimize the Process

  Pradip Gunaki (Author)

  164-168

  Keywords:

  Value Stream, Current Stream Mapping (VSM), Future State Mapping, Cycle Time, Lean Manufacturing, Simulation.

  • PDF ¹¹⁶

  Abstract views: 112 times| Download: 116 times| https://doi.org/10.18311/jmmf/2022/31221

• Evaluation of Power Consumption in High Efficiency Milling (HEM) of Aluminium 6061

  Rizal Mohamed Noor, Ahmad Faiz Zubair, Abdul Halim Zulkifli, Abdul Rahman Hemdi, Pramodkumar Kataraki (Author)

  169-172

  • PDF ⁷⁴

  Abstract views: 62 times| Download: 74 times| https://doi.org/10.18311/jmmf/2022/31222

• Movable Automatic Medicine Reminder and Indicator Using Arduino

  Naveen kumar Y, Vinod Kumar M S, R Suresh, N Jagadeeswaran (Author)

  173-179

  Keywords:

  Arduino UNO, Real Time Clock (RTC) Module, LCD, DC Motor, L298N Motor Driver, Buzzer.

  • PDF ¹⁵²

  Abstract views: 112 times| Download: 152 times| https://doi.org/10.18311/jmmf/2022/31223

• Production and Characterization of Hydrochar and Biocrude of Yard Waste from Tectona Grandis Using Hydrothermal Carbonization

  Abhilash. N, Pavan Kumar Reddy, Pritam Bhat, Ananth S. Iyengar (Author)

  180-189

  Keywords:

  Hydrochar, FTIR, SEM, HTC.

  • PDF ¹³⁶

  Abstract views: 155 times| Download: 136 times| https://doi.org/10.18311/jmmf/2022/31224

• Conduction Heat Study of Different Coil Design of Electric Iron

  Nurshaira Binti Mat Nasir, Ahmad Faiz Zubair, Ana Syahidah Mohd Rodzi, Rizal Mohamed Noor, Abdul Rahman Hemdi, Pramodkumar Kataraki (Author)

  190-194

  • PDF ¹³⁸

  Abstract views: 163 times| Download: 138 times| https://doi.org/10.18311/jmmf/2022/31242

• A Numerical Investigation of Natural Convection in a Porous Enclosure with Lower Wall Heating

  Vijaya Kumara V.M, Aswatha ., Banu Prakash Reddy V, Amit Datta D, Balaji V, Ashik A V (Author)

  195-201

  Keywords:

  Trapezoidal Cavity, Buoyant Heat Transfer, Aspect Ratio, and Nusselt Number.

  • PDF ⁸⁷

  Abstract views: 86 times| Download: 87 times| https://doi.org/10.18311/jmmf/2022/31225

• Thermal Management for Natural Convection within Porous Enclosures

  Vijaya Kumara V M, Aswatha ., Vignesh N Kumar, Tejus R Mandal, Shankar V (Author)

  202-210

  Keywords:

  Square Trapezoidal Cavity, Buoyant Heat Transfer, Sinusoidal Heating, Aspect Ratio, and Nusselt Number.

  • PDF ⁷⁴

  Abstract views: 75 times| Download: 74 times| https://doi.org/10.18311/jmmf/2022/31226

• Triply Periodic Minimal Surfaces: An Overview of Their Features, Failure Mechanisms, and Applications

  Arpit Gupta, Sunith Babu L (Author)

  211-221

  • PDF ¹⁸⁴

  Abstract views: 609 times| Download: 184 times| https://doi.org/10.18311/jmmf/2022/31230

• Effect of Polymer Quenchants on the Toughness and Hardness of Different Medium Carbon Low Alloy Steels.

  C M Ramesha, Chandan B R, Mohandas K N, Anilkumar T, Sharan Raj (Author)

  222-230

  • PDF ⁷⁵

  Abstract views: 64 times| Download: 75 times| https://doi.org/10.18311/jmmf/2022/31243

• Mechanical Characterization of Graphene Reinforced Al2024/Albite Hybrid Composites by Powder Metallurgy.

  Madhusudhana S, L. H. Manjunath, J. N. Prakash (Author)

  231-237

  Keywords:

  Al2024, Albite, Graphene, Powder MetallurgyMechanical Properties

  • PDF ⁶⁸

  Abstract views: 55 times| Download: 68 times| https://doi.org/10.18311/jmmf/2022/32753

• A Review on Tensile, Microhardness and Microstructural Properties of Aluminum AA2219 Alloy Joints Obtained by Friction Stir Welding Process.

  Rahul Biradar, Sachinkumar Patil (Author)

  238-242

  Keywords:

  AA2219 aluminum alloy: FSW: Tensile properties: Hardness: Microstructure: Joint characterization.

  • PDF ⁷⁷

  Abstract views: 130 times| Download: 77 times| https://doi.org/10.18311/jmmf/2022/32758

• Fractal Contact Mechanic Behaviour of Base Structural Steels in Abrasion

  S. Chethan, K. Srinivasa, B. R. Hemanth , Hemaraju (Author)

  247-253

  Keywords:

  Tribological Behaviour, Abrasion, Structural Steel, Scanning Electron Microscope etc.

  • PDF ⁷⁹

  Abstract views: 177 times| Download: 79 times| https://doi.org/10.18311/jmmf/2022/31244

• Optimization of Gas Metal Arc Welding Process Parameters on Structural Steel Plates by Taguchi Method.

  Praveen Math, B.S. Praveen Kumar (Author)

  250-255

  Keywords:

  Gas Metal Arc Welding (GMAW), Weld Dilution, Regression Analysis

  • PDF ⁸²

  Abstract views: 59 times| Download: 82 times| https://doi.org/10.18311/jmmf/2022/32760

• Artificial Coalification of Orange Peel for Extraction of Value Added Chemicals

  Mr. Siddanagouda M. Patil, Pragathi A.P., Shreya S. V., Supritha M., Abhilash N., Ananth S. Iyengar (Author)

  256-260

  • PDF ⁷¹

  Abstract views: 92 times| Download: 71 times| https://doi.org/10.18311/jmmf/2022/31234

• A Deep Study on Machine Learning Techniques for Tool Condition Monitoring in Turning of Titanium-based Superalloys.

  Sanjeet Jakati, Vishwanath Koti, Pramodkumar S. Kataraki, M. Mazlan, M. F. Hamid (Author)

  261-266

  • PDF ⁷⁴

  Abstract views: 67 times| Download: 74 times| https://doi.org/10.18311/jmmf/2022/31235

• To Study the Influence of Ethanol and EGR on Engine Performance and Emissions by the Integration of Taguchi and RSM for an Engine Fuelled with CAOME.

  Varun kumar Reddy N, SG Sangashetty, NR Banapurmath Math, Arun Kumar H, Vinod R (Author)

  267-274

  • PDF ⁵⁸

  Abstract views: 53 times| Download: 58 times| https://doi.org/10.18311/jmmf/2022/31237

• Experimental Study of Polymer Matrix Composites using Polyester, HEMP and Calcium Silicate.

  Sachin Prabha, Dattatray G.B. (Author)

  275-284

  • PDF ⁶²

  Abstract views: 52 times| Download: 62 times| https://doi.org/10.18311/jmmf/2022/31238

• Fault Prediction of Ball Bearings using Machine Learning: A Review

  Mohammed Shahid Kolhar, Niranjan Hiremath (Author)

  285-289

  • PDF ⁹³

  Abstract views: 130 times| Download: 93 times| https://doi.org/10.18311/jmmf/2022/31239

• Development of Biodegradable Pressure Sensor for Orthopedic Applications

  Avinash S, Hanumantharaju HG, Harshith, Hrithik Eric Fernandes (Author)

  290-293

  • PDF ⁷⁰

  Abstract views: 52 times| Download: 70 times| https://doi.org/10.18311/jmmf/2022/31206

• A Review on Working and Design of Convertor for Exhaust Gas Convertion.

  Ramesh Kumar S C, Shekhar Onikeri (Author)

  294-296

  • PDF ⁶⁰

  Abstract views: 46 times| Download: 60 times| https://doi.org/10.18311/jmmf/2022/31240

• Experimental Investigation on Effect of Nano Particles on Performance and Emission Characteristics of Diesel Engine Fuelled with Waste Cooking Oil Biodiesel

  N Kapilan, Ganesh K, Balaji S (Author)

  297-301

  Keywords:

  Biodiesel, Nanoparticle, Properties, Engine test, Performance

  • PDF ⁷⁶

  Abstract views: 72 times| Download: 76 times| https://doi.org/10.18311/jmmf/2022/32769

• Design and Analysis of Bipolar Plate of Polymer Electrolyte Membrane Fuel Cell Assembly used for Automotive Applications

  Rakshith T M, Pramodkumar S Kataraki, Ayub Ahmed Janvekar, A F Zubair, Isam Qasem, Ahmed A. Hussien, Aulia Ishak, M. Mazlan, M. F. Hamid (Author)

  302-306

  Keywords:

  Polymer electrolyte membrane fuel cell; Bipolar plate; Membrane electrode assembly; Gas diffusion layer and Finite element analysis

  • PDF ¹⁰⁵

  Abstract views: 190 times| Download: 105 times| https://doi.org/10.18311/jmmf/2022/32771

• Microstructure and Tribological Property Correlations of Die Cast and Spray Formed Al-30 wt.% Si Alloy

  Chandra Mohan H. K, Devaraj S, Narayana Swamy K. S, Venkatesh B K (Author)

  307-313

  Keywords:

  Alloys, Mechanical properties, Microstructure, Wear properties.

  • PDF ⁵⁹

  Abstract views: 67 times| Download: 59 times| https://doi.org/10.18311/jmmf/2022/32772

• Design and Analysis of Wing Root Fitting of a Medium Fighter Aircraft Made of B4C Reinforced Al7075 Alloy

  Rakesh C M, Pavan D (Author)

  314-319

  Keywords:

  A17075, SEM, B4C, CATIA V5, ANSYS workbench software, Reinforced, Wing root fitting, Aircraft etc.

  • PDF ⁷⁷

  Abstract views: 70 times| Download: 77 times| https://doi.org/10.18311/jmmf/2022/32774

• Design and Numerical Study of Serpentine Duct using Flow Controllers for Flow Characteristics Enhancement

  Yogesh Shankar R.P, Pavan D (Author)

  320-326

  Keywords:

  CATIA V5, ANSYS workbench software, FLUENT, ICEM CFD, SST k-ù

  • PDF ⁷⁵

  Abstract views: 67 times| Download: 75 times| https://doi.org/10.18311/jmmf/2022/32776

• Development of Petro-Electric Vehicle

  Mahesh L Mahesh L, Anand S, H Nagishetty Chandrakanth, Harshal Reddy, Karthik M (Author)

  327-331

  Keywords:

  Battery, DC Motor, Electric Vehicle, Sprocket.

  • PDF ⁹⁴

  Abstract views: 62 times| Download: 94 times| https://doi.org/10.18311/jmmf/2022/32777

• Automatic Feeder for Hardness Testing Equipment

  Vignesh R B, Vinay R, Venaktesh H, Yaseen Shariff, Vijee kumar (Author)

  332-337

  Keywords:

  RAB,; Hardness testsing, Vibratory feeder bowl, Pnemaric double acting cylinder, Proximity sensors.

  • PDF ⁶⁸

  Abstract views: 84 times| Download: 68 times| https://doi.org/10.18311/jmmf/2022/32780

• Numerical Studies of Air Flow Analysis in Compressed Air Filters

  Tejas R, Niranjan Hiremath, K S Narayanaswamy (Author)

  338-344

  Keywords:

  Compressed air, Compressed air filter, Experimental and analytical methods, Lifespan of filter.

  • PDF ⁶⁰

  Abstract views: 58 times| Download: 60 times| https://doi.org/10.18311/jmmf/2022/32783

• Experimental Fatigue Studies of Additively Manufactured Fiber Reinforced Thermoplastic

  M P Aldo Jason, V S Mudakappanavar, N V Sreekanth, Santhosh, Doreswamy (Author)

  349-354

  Keywords:

  Additive manufacturing, Carbon fiber reinforced plastic, tensile testing, fatigue testing

  • PDF ⁸²

  Abstract views: 85 times| Download: 82 times| https://doi.org/10.18311/jmmf/2022/32926

• Modelling and Analysis of The Effect of Plateau Honing Operation on Cylinder Liners

  Santhosh H, R Kumar, Deepak S, Vasu S (Author)

  355-362

  Keywords:

  plateau honing operation, surface roughness, honing machine, grid size of honing stick

  • PDF ⁶⁸

  Abstract views: 77 times| Download: 68 times| https://doi.org/10.18311/jmmf/2022/32932

• Development of IoT Based Pneumatic Punching Machine

  Vasu S, R Kumar, Nandeesha H L, Santhosh H (Author)

  363-367

  Keywords:

  IoT (Internet of Things), Pneumatic Punching Machine, Production monitoring, Arduino.

  • PDF ⁸⁷

  Abstract views: 198 times| Download: 87 times| https://doi.org/10.18311/jmmf/2022/32933

• Design and Development of an IoT Kit To Predict Cutting Tool Life and Generate Auto Inventory

  Niveditha Dharani, Nandeesha H L (Author)

  368-373

  Keywords:

  Machining, IoT, Cutting tool life, Temperature

  • PDF ⁸⁴

  Abstract views: 87 times| Download: 84 times| https://doi.org/10.18311/jmmf/2022/32934

• Modelling and Optimization of Orientated Beam with Tip Mass for Vibration Energy Harvesting using Piezoelectric Patches

  Laxmi. B. Wali, C V Chandrasekhara (Author)

  374-379

  Keywords:

  Orientation, Fem, Vibration, Energy harvesting, Piezoelectric.

  • PDF ⁷³

  Abstract views: 75 times| Download: 73 times| https://doi.org/10.18311/jmmf/2022/32935

• Fault Detection of Bearing using Signal Processing Technique and Machine Learning Approach

  Manjunatha G, H C Chittappa, Dilip Kumar K (Author)

  380-388

  Keywords:

  Spectrum analysis, DWT, Machine learning, J-48, Bearing fault.

  • PDF ⁸⁸

  Abstract views: 319 times| Download: 88 times| https://doi.org/10.18311/jmmf/2022/32937

• Experimental Investigation of InTube Condensation of HFO-1234yf

  Muthuraju N P, B. Sadashive Gowda, G.S.V.L Narasimham, H M. Gurudatt (Author)

  389-395

  Keywords:

  In-tube condensation, Heat Transfer Coefficient (HTC), R1234yf.

  • PDF ⁷⁷

  Abstract views: 79 times| Download: 77 times| https://doi.org/10.18311/jmmf/2022/32938

• Experimental Investigation of the Effect of Integrated Fins on Heat Transfer Rate of Double Pipe Heat Exchanger

  Praveenkumara B M, B Sadashive Gowda, Naveen H V (Author)

  396-404

  Keywords:

  Mass flow rate, Coefficient of heat transfer, Heat transfer rate, LMTD, Counterflow.

  • PDF ⁶⁷

  Abstract views: 82 times| Download: 67 times| https://doi.org/10.18311/jmmf/2022/32939

• Optimization of The Gating Design For AA2024 Base Alloy Casting using Numerical Method

  Harshit Shukla, Nagesh S N, Siddaraju C, Rajesh M N, Ram Prabhu T (Author)

  405-409

  Keywords:

  AA2024, Gating System design, Numerical method, Solidification.

  • PDF ⁷⁵

  Abstract views: 110 times| Download: 75 times| https://doi.org/10.18311/jmmf/2022/32940

• Conversion and Management of Plastic Waste into useful Resources – A review

  Balaji S, Natesan Kapilan, H.V. Srikanth, Praveena B A (Author)

  410-415

  Keywords:

  Alternate fuel, Plastic waste, Pyrolysis, Recycle, Waste management

  • PDF ⁶⁹

  Abstract views: 87 times| Download: 69 times| https://doi.org/10.18311/jmmf/2022/32942

• Review Paper on Development of Nano Inserts for Machining HRSA Materials for Aerospace Applications

  Shashidhar M Kotian, K. S. Narayanaswamy, Dasharath S. M (Author)

  416-423

  Keywords:

  HRSA, Cutting tools, Nano powders, Tungsten carbide, Grain growth inhibitors, Spark Plasma sintering.

  • PDF ⁷²

  Abstract views: 79 times| Download: 72 times| https://doi.org/10.18311/jmmf/2022/32943

• To study the Aerodynamic Effects of Spoiler of a Car (Sedan – Segment) using Computational Fluid Dynamics

  Madhu B P, G Mahendramani (Author)

  424-429

  Keywords:

  Automotive industry, Aerodynamics, ANSYS Fluent, Spoiler of a car, Lift

  • PDF ¹³⁹

  Abstract views: 439 times| Download: 139 times| https://doi.org/10.18311/jmmf/2022/32945

• Energy Absorption Capacity of Empty and Foam- Filled Concentric Cylindrical Tubes

  S. Suresha, Raghavendra S (Author)

  430-436

  Keywords:

  Nonlinear dynamic, quasi-static, closed-form solution, cylindrical tubes

  • PDF ⁷⁹

  Abstract views: 58 times| Download: 79 times| https://doi.org/10.18311/jmmf/2022/32946

• CFD Analysis of a Transient Rotor-Stator Axial Steam Turbine Stage

  C Rajesh Babu, Sukanta Roy (Author)

  437-441

  Keywords:

  Multiple frames of reference, Transient analysis, efficiency, Axial Turbine.

  • PDF ¹⁰⁴

  Abstract views: 168 times| Download: 104 times| https://doi.org/10.18311/jmmf/2022/32947

• To Study the Influence of Injection Timing, Injector Opening Pressure and Blend Percentage on Engine Performance and Emissions by the Integration of Taguchi and RSM for an Engine Fuelled with CAOME

  Varun Kumar Reddy N, Y. Sujatha, Arun Kumar G L, Gurushanth B Vaggar (Author)

  442-450

  Keywords:

  Taguchi, Performance, S/N ratio, ANOVA, Biodiesel

  • PDF ⁸⁷

  Abstract views: 67 times| Download: 87 times| https://doi.org/10.18311/jmmf/2022/32948

• Battery Technology – A Comprehensive Review

  Arun Kumar H, Varun Kumar Reddy N, Manjunath S H, Shamanth V (Author)

  451-456

  Keywords:

  Electrical vehicles, Hybrid vehicle, lithium-ion, recycling.

  • PDF ⁹⁵

  Abstract views: 115 times| Download: 95 times| https://doi.org/10.18311/jmmf/2022/32949

• Dynamic Analysis of Flexible two Link Robotic Arm Considering Joint Stiffness

  Vishwanath Koti, Chennabasappa Hampali, Basawaraj, N. Jagadeeshwaran (Author)

  457-465

  Keywords:

  Flexible manipulators, Boundary conditions, Assumed modes, Initial modes

  • PDF ⁸⁸

  Abstract views: 189 times| Download: 88 times| https://doi.org/10.18311/jmmf/2022/32950