Strain-Cum-Deformation Analysis of Friction Stir Welded AA5052 and AA6061 Samples with Microstructural Analysis

Jump To References Section

Authors

  • T. Prabaharan
     Department of Mechanical Engineering, St. Peters University, Chennai 600 054, Tamil Nadu ,IN
  • M.B.S. Sreekara Reddy
     Department of Mechanical Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram, 521230, AP ,IN
  • A. Bovas Herbert Bejaxhin
     Department of Mechanical Engineering, Saveetha School of Engineering, SIMATS, Chennai ,IN
  • Ramanan .
     Department of Mechanical Engineering, PSN Engineering College, Tiruneveli, Tamilnadu ,IN
  • Pothamsetty Kasi V
     Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, AP ,IN
  • Jenaris .
     Department of Mechanical Engineering, PSN Engineering College, Tiruneveli, Tamilnadu ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31214

Keywords:

Friction Stir Welding, Duplex Stainless Steel, PDZ, ERD, FWTPET.

Abstract

Friction stir welding is a brand-new welding technique that was discovered in 1991 by Wayne Thomas in United Kingdom. It is a form of solid state welding in which a non-consumable electrode is used to unite two work components without melting either of them. The mechanical characteristics and numerous microscopic studies of materials used for friction stir welding, such as duplex stainless steel UNS S31803, SA 213 tube to SA387, Al7075 alloy, and AA6061 metal, are reviewed. Here, welded areas were the primary focus of the microscopic study, and the diverse outcomes are also discussed.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

Prabaharan, T., Sreekara Reddy, M., Bovas Herbert Bejaxhin, A., ., R., V, P. K., & ., J. (2023). Strain-Cum-Deformation Analysis of Friction Stir Welded AA5052 and AA6061 Samples with Microstructural Analysis. Journal of Mines, Metals and Fuels, 70(10A), 136–146. https://doi.org/10.18311/jmmf/2022/31214

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Copyright (c) 2023 Journal of Mines, Metals and Fuels

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Rajamadam, (2016): “Experimental and Numerical Investigation of AL 6061 AlloysReinforced with SIC-TIO2” International Journal of Mechanical and Production Engineering, Volume- 4, Issue-11.

Ashok Kr. Mishra, (2012): “Tribological Behaviour of Al-6061 / SiC Metal Matrix Composite by Taguchi’s Techniques” International Journal of Scientific and Research Publications, Volume 2, Issue 10.

NaikSachin Ashok, (2016): “Investigation on Mechanical and Tribological Properties of 6061 Aluminium – SiC Alloy Fabricated by Stir Casting Method and Equal Channel Angular Extrusion: The Review” International Research Journal of Engineering and Technology (IRJET), Volume: 03 Issue: 04.

S. Suresh Kumar, (2014): “Influence of Residual Stress on Stress Intensity Factor Estimation of Multiple Cracks in a Dissimilar Welded Joint” 1st International Conference on Structural Integrity, Procedia Engineering 86 (2014) 234 – 241. DOI: https://doi.org/10.1016/j.proeng.2014.11.033

Mr. P H Shah, (2016): “An experimental investigation of temperature distribution and joint properties of Al 7075 T651 friction stir welded aluminium alloys” 3rd International Conference on Innovations in Automation and Mechatronics Engineering, Procedia Technology 23 ( 2016 ) 543 – 550. DOI: https://doi.org/10.1016/j.protcy.2016.03.061

Mohammed Asif. M, (2015): “Finite element modelling and characterization of friction welding on UNS S31803 duplex stainless steel joints” Engineering Science and Technology, an International Journal, Issue:1-9. DOI: https://doi.org/10.1016/j.jestch.2015.05.002

S.Pandiyarajan, (2017): “An Investigation of metal flow during friction welding of SA213 to SA387 tube plate with Backing Block” International Research Journal of Engineering and Technology issue: 05. DOI: https://doi.org/10.1016/j.aej.2016.03.040

G. Elatharasan, (2013): “An experimental analysis and optimization of process parameter on friction stir welding of AA 6061-T6 aluminum alloy using RSM” International Conference on Design and Manufacturing, Procedia Engineering 64 (2013) 1227 – 1234. DOI: https://doi.org/10.1016/j.proeng.2013.09.202

Miller, (2016): “Probability and statistics for dngineers” International Journal of Mechanical and Production Engineering, issue:5

Wang, (2014): “Modeling of continuous drive friction welding of mild steel” International Research Journal of Engineering and Technology, issue:10.

MuthuMekala N, Balamurugan C, Bovas Herbert Bejaxhin, “Deform 3D Simulation and Experimental Investigation of Fixtures with Support Heads”, MECHANIKA. 2022 Volume 28(2): 130"138, ISSN 1392"1207. http://dx.doi.org/10.5755/j02.mech.29468. DOI: https://doi.org/10.5755/j02.mech.29468

A. Bovas Herbert Bejaxhin, G.M. Balamurugan, S.M. Sivagami, K. Ramkumar, V. Vijayan and S. Rajkumar, “Tribological Behaviour and Analysis on Surface Roughness of CNC Milled Dual Heat Treated Al6061 Composites”, Advances in Materials Science and Engineering, Volume 2021, Article ID 3844194, 14 pages, https://doi.org/10.1155/2021/3844194. DOI: https://doi.org/10.1155/2021/3844194

J Jones Praveen, M Vinosh, A Bovas Herbert Bejaxhin, G Paulraj, “Embedded effect of ZrB2-Si3N4 on tribologicalbehaviour of Al 8011 metal matrix composite”, Materials Today: Proceedings, Elsevier. https://doi.org/10.1016/j.matpr.2020.10.954. DOI: https://doi.org/10.1016/j.matpr.2020.10.954

VasudevaRao, P. Periyaswamy, A. Bovas Herbert Bejaxhin, E. Naveen, N. Ramanan, and Aklilu Teklemariam, Wear Behavioural Study of Hexagonal Boron Nitride and Cubic Boron Nitride-Reinforced Aluminum MMC with Sample Analysis, Hindawi, Journal of Nanomaterials, Volume 2022, Article ID 7816372, 10 pages, https://doi.org/10.1155/2022/7816372. DOI: https://doi.org/10.1155/2022/7816372

L. Natrayan, M. Ravichandran, DhinakaranVeeman, P. Sureshkumar, T. Jagadeesha, R. Suryanarayanan, WubishetDegifeMammo, “Enhancement of Mechanical Properties on Novel Friction Stir Welded Al-Mg-Zn Alloy Joints Reinforced with Nano-SiC Particles”, Journal of Nanomaterials, vol. 2021, pp. 1-10, 2021. https://doi.org/10.1155/2021/2555525 DOI: https://doi.org/10.1155/2021/2555525

L.Natrayan, V. Sivaprakash and M. S. Santhosh. “Mechanical, Microstructure and wear behaviour of the material AA6061 reinforced SiC with different leaf ashes using advanced stir casting method.” International Journal of Engineering and Advanced Technology, vol. 8, pp. 366-371, 2018

L.Natrayan, M. S. Santhosh, R. Mohanraj, and R. Hariharan. “Mechanical and Tribological Behaviour of Al2O3 & SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy”. IOP Conf. Ser. Mater. Sci. Eng, vol. 561, no. 1, pp. 012038, 2019. DOI: https://doi.org/10.1088/1757-899X/561/1/012038