Development of Biodegradable Pressure Sensor for Orthopedic Applications
Authors
-
,IN
Avinash S -
Associate Professor, Department of Mechanical Engineering, U.V.C.E, Bangalore, 560001. ,INHanumantharaju HG
-
Student, Department of Mechanical Engineering, REVA University, Bangalore, 560064. ,INHarshith
-
Student, Department of Mechanical Engineering, REVA University, Bangalore, 560064. ,INHrithik Eric Fernandes
DOI:
https://doi.org/10.18311/jmmf/2022/31206Abstract
Many injuries & fractures are corrected by the means of surgery and regularly monitored by regular scans such as MRI, X-Ray etc. As the technology has improved over the years there are many advanced methods such as biodegradable pressure sensors which can be implanted during the surgery and used for extracting useful data. The material used to build this pressure sensor will be completely made of biodegradable materials to cause no side effects or harm to the body. The preferred fabrication method is Ink jet printer method or Screen-printing method. This biodegradable pressure sensor will be a huge boon to all humanity as it will be able to provide live data of pressure and strain acting on the injured bone which will be useful in recovery and rehabilitation. With this data the doctor can access the recovery and tailer the activities of the injured bone.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Journal of Mines, Metals and Fuels
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
P. Van Gerwen, W. Laureyn, W. Laureys et al., “Nanoscaled interdigitated electrode arrays for biochemical sensors”, Sensors and Actuators B: Chemical, vol. B49, no. 1-2, pp. 73–80, 1998 DOI: https://doi.org/10.1016/S0925-4005(98)00128-2
N. Sokolov, M. E. Roberts, and Z. Bao, “Fabrication of low-cost electronic biosensors”, Mater. Today, vol. 12. pp. 12–20, 2009. DOI: https://doi.org/10.1016/S1369-7021(09)70247-0
A review on emerging biodegradable polymers for environmentally benign transient electronic skins”, Xiao Peng, Kai Dong, Zhiyi Wu, Jie Wang &Zhong Lin Wang, Journal of Materials Science volume 56, pages 16765–16789 (2021) DOI: https://doi.org/10.1007/s10853-021-06323-0
Proceedings of the World Molecular Imaging Congress 2014, Seoul, Korea, September 17-20, 2014, Molecular Imaging and Biologyvolume 17, pages1– 1352 (2015) DOI: https://doi.org/10.1007/s11307-014-0809-1
E. Cingolani, J. I. Goldhaber, E. Marbán, Nature Reviews Cardiology 2017, 15, 139. [2] S. P. Lacour, G. Courtine, J. Guck, Nat. Rev. Mater.2016, 1, 16063. DOI: https://doi.org/10.1038/nrcardio.2017.165
Burny F, Donkerwolcke M, Bourgois R, Domb M, Saric O: Twenty years experience in fracture healing measurements with strain gauges. Orthopedics1984; 7:1823-1826 DOI: https://doi.org/10.3928/0147-7447-19841201-08
M. Luo , A. W. Martinez , C. Song, F. Herrault, M. G. Allen , and J. Microelectromech., “A Microfabricated Wireless RF Pressure Sensor Made Completely of Biodegradable Materials”, Syst., vol.23, pp.4, 2014. DOI: https://doi.org/10.1109/JMEMS.2013.2290111
C. M. Boutry, A. Nguyen, Q. Omotayo Lawal, A. Chortos, S. RondeauGagné, Z. Bao, “A sensitive and biodegradable pressure sensor array for cardiovascular monitoring,” Advanced Materials,available online, 2015 DOI: https://doi.org/10.1002/adma.201502535
X. Sun, Y. Zheng, X. Peng, X. Li, H. Zhang, “Parylene-based 3D high performance folded multilayer inductors for wireless power transmission in implanted applications”, Sens. Actuators, A, vol.208, pp.141-151, 2014 DOI: https://doi.org/10.1016/j.sna.2013.12.038
