Battery Technology – A Comprehensive Review

Jump To References Section

Authors

  • Arun Kumar H
     Assistant Professor, School of Mechanical Engineering, REVA University, Bangalore 560064 ,IN
  • Varun Kumar Reddy N
     Professor, Department of Mechanical Engineering, Adichunchanagiri University, Bangalore 571448 ,IN
  • Manjunath S H
     Professor, Department of Mechanical Engineering, Adichunchanagiri University, Bangalore 571448 ,IN
  • Shamanth V
     Associate Professor, School of Mechanical Engineering, REVA University, Bangalore 560064 ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/32949

Keywords:

Electrical vehicles, Hybrid vehicle, lithium-ion, recycling.

Abstract

Depletion of fossil fuels, stringent pollution norms have made a way for research on the systems that can store energy from renewable sources like solar and wind. Electrical vehicles (EVs) and hybrid vehicles (HEVs) density worldwide are increasing at faster rate and have projection estimate of more than 140 million (HEVs) and EVs on the road by 2030. Design of these advanced engines are based on the availability power source namely lithium-ion (Li-ion) battery. This paper focuses on available battery technologies, components of Li-ion batteries, key features of the battery such as energy density, power density and so on and opportunities of recycling, extraction of valuable metals from the waste batteries are also included.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

H, A. K., N, V. K. R., S H, M., & V, S. (2023). Battery Technology – A Comprehensive Review. Journal of Mines, Metals and Fuels, 70(10A), 451–456. https://doi.org/10.18311/jmmf/2022/32949

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Andrew Ulvestad, “A Brief Review of Current Lithium Ion Battery Technology and Potential Solid State Battery Technologies.

Yu Miao et,al, “Current Li-Ion Battery Technologies in Electric Vehicles and Opportunities for Advancements,” Energies 2019, 12, 1074; doi: 10.3390/ en12061074.

Jim McDowall, “Understanding Lithium-Ion Technology, Business Development Manager Saft America Inc.

Da Deng, “Li-ion batteries: basics, progress, and challenges,” Energy Science and Engineering 2015; 3(5):385–418.

Sang-Eun Cheon et, al, “Rechargeable Lithium Sulfur Battery I. Structural Change of Sulfur Cathode During Discharge and Charge,” Journal of The Electrochemical Society, 150 ~6! A796-A799 ~2003! DOI: https://doi.org/10.1149/1.1571532

Matthias Vetter, Stephan Lux, “Rechargeable Batteries with Special Reference to Lithium-Ion Batteries’’ Storing Energy. http://dx.doi.org/10.1016/B978-0-12803440-8.00011-7-2016

Yu Miao, “Current Li-Ion Battery Technologies in Electric Vehicles and Opportunities for Advancements’’ Energies 2019, 12, 1074; doi:10.3390/en12061074. DOI: https://doi.org/10.3390/en12061074

Zachary P. Cano, “Batteries and fuel cells for emerging electric Vehicle markets Nature Energy | VOL 3 | APRIL 2018 | 279–289. DOI: https://doi.org/10.1038/s41560-018-0108-1

Burçak Ebin et, al, “Recovery of industrial valuable metals from household battery waste Ebin 2016b; Ebin et al., 2017.

D. M. Davies et, al, “Combined economic and technological evaluation of battery energy storage for grid applications’’ Nature Energy, Vol. 4 42, January 2019, 42–50. DOI: https://doi.org/10.1038/s41560-018-0290-1

Da Deng, “Li-ion batteries: basics, progress, and challenges Energy Science and Engineering’’ 2015; 3(5): 385–418 DOI: https://doi.org/10.1002/ese3.95

Lakshmi Narasimhan N. “Assessment of latent heat thermal storage systems operating with multiple phase change materials’’ Journal of Energy Storage 23 (2019) 442–455 DOI: https://doi.org/10.1016/j.est.2019.04.008

Ashkan Nayarit et, al, “The Effect of Temperature on Lithium-Ion Battery Energy Efficiency With Raphite/ Lifepo 4 Electrodes At Different Nominal Capacities http://proceedings.asmedigitalcollection.asme.org on 10/09/2018 DOI: https://doi.org/10.1115/POWER2018-7375

Letizia Roccamena et. al, “Development and validation of the numerical model of an innovative PCM based thermal storage system’’ Journal of Energy Storage 24 (2019) 100740. DOI: https://doi.org/10.1016/j.est.2019.04.014

Darlene et. al, “Economics and Challenges of Li-Ion Battery Recycling from End of Life Vehicles Procedia Manufacturing 33 (2019) 272–279. DOI: https://doi.org/10.1016/j.promfg.2019.04.033

Songwen Xiao et. al, “Recovery of Valuable Metals from Spent Lithium-Ion Batteries by Smelting Reduction Process Based on MnO–SiO2–Al2O3 Slag System’’ The Minerals, Metals & Materials Society 2017. DOI: https://doi.org/10.1007/s40831-017-0131-7

J´essica Frontino Paulino et. al, “Recovery of valuable elements from spent Li-batteries’’ Journal of Hazardous Materials 150 (2008) 843–849 DOI: https://doi.org/10.1016/j.jhazmat.2007.10.048

Chunwei Liu et. al, “Recycling of spent lithium-ion batteries in view of lithium recovery: A critical review’’ https:// doi.org/10.1016/j.jclepro.2019.04.304.

Caibin Wu et. al, “Recycling valuable metals from spent lithium-ion batteries by ammonium sulfite-reduction ammonia leaching” Waste Management 93 (2019) 153–161. DOI: https://doi.org/10.1016/j.wasman.2019.04.039

Xiangping Chen et. al, “Sustainable Recovery of Metals from Spent Lithium-Ion Batteries: A Green Process” ACS Sustainable Chem. Eng. 2015, 3, 3104" 3113. DOI: https://doi.org/10.1021/acssuschemeng.5b01000

Daniel Quintero-Almanza et. al, “Recovery of Cobalt from Spent Lithium-Ion Mobile Phone Batteries Using Liquid–Liquid Extraction” Batteries 2019, 5, 44; doi:10.3390/batteries5020044 DOI: https://doi.org/10.3390/batteries5020044