Numerical Studies of Air Flow Analysis in Compressed Air Filters

Jump To References Section

Authors

  • Tejas R
     PG Scholar, School of Mechanical Engineering, REVA University, Bangalore 560064,Karnataka. ,IN
  • Niranjan Hiremath
     Professor, School of Mechanical Engineering, REVA University, Bangalore 560064, Karnataka. ,IN
  • K S Narayanaswamy
     Professor, School of Mechanical Engineering, REVA University, Bangalore 560064, Karnataka. ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/32783

Keywords:

Compressed air, Compressed air filter, Experimental and analytical methods, Lifespan of filter.

Abstract

The filter is developed by placing the filter media in between the inner surface and the outer surface of the stainless steel fabrication. Then the study on the compressed coming out of the filter is tested and analysis is made by two methods. In experimental method, the analysis done for the output compressed air which is passed through the 5HP compressor and the pressure gauge which is placed on either side of the filter. The survey is also conducted to check the life span of the filter. In analytical method the results are obtained for the ANYSYS ICEPAK and ANSYS space claim software. Then the results of both methods are compared and the results are concluded

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

R, T., Hiremath, N., & Narayanaswamy, K. S. (2023). Numerical Studies of Air Flow Analysis in Compressed Air Filters. Journal of Mines, Metals and Fuels, 70(10A), 338–344. https://doi.org/10.18311/jmmf/2022/32783

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

ASME section 8

EN ISO 15607: “Specification and qualification of welding procedures for metallic materials - General rules (ISO15607:2003)”

EN ISO 15609: “Specification and qualification of welding procedures for metallic materials - Welding procedure specification(ISO 15609)”, five parts.

EN ISO 15614: “Specification and qualification of welding procedures for metallic materials-Welding procedure test (ISO 15614)”, 13 parts.

API 1104: “Welding of pipelines and related facilities”, parts 5 (procedures)

“Compressor and Compressed Air System”, Energy Efficiency Guide for Industries, Chapter 3, pp.55-71,2009

Vijay kumar F Pipalia, Dipesh D. Shukla and Niraj C. Mehta, “Investigation on Reciprocating Air Compressors –A Review”, International Journal of Recent Scientific ResearchVol.6, Issue 12, pp.7735-7739, December, 2015.

Shashank Gurnule, Ritesh Banpurkar, “Design, Modification & Analysis of Industrial Air Compressor (Type – VT4) – A Review”, SSRG International Journal of Mechanical Engineering(SSRG- IJME), V4(12), Page 3–7, December 2017. ISSN: 2348–8360 DOI: https://doi.org/10.14445/23488360/IJME-V4I12P102

Kuldeep Tyagi & Er. Sanjeev Kumar, “Improved Air Compression System”, International Journal of Scientific Engineering and Applied Science(IJSEAS) - Volume-1, Issue-5, August 2015.

Pawan Kumar Gupta, S.P.Asthana, Neha Gupta, “A Study Based on Design of Air Compressor Intercooler”, International Journal of Research in Aeronautical and Mechanical Engineering,Vol.1 Issue.7, November 2013, Pages: 186-203ISSN (ONLINE): 2321-3051.