Conduction Heat Study of Different Coil Design of Electric Iron

Jump To References Section

Authors

  • Nurshaira Binti Mat Nasir
     Intelligent and Smart Manufacturing Centre, Center for Mechanical Engineering Studies, Universiti Teknologi MARA, Penang Branch ,MY
  • Ahmad Faiz Zubair
     Intelligent and Smart Manufacturing Centre, Center for Mechanical Engineering Studies, Universiti Teknologi MARA, Penang Branch ,MY
  • Ana Syahidah Mohd Rodzi
     Intelligent and Smart Manufacturing Centre, Center for Mechanical Engineering Studies, Universiti Teknologi MARA, Penang Branch ,MY
  • Rizal Mohamed Noor
     Intelligent and Smart Manufacturing Centre, Center for Mechanical Engineering Studies, Universiti Teknologi MARA, Penang Branch ,MY
  • Abdul Rahman Hemdi
     Intelligent and Smart Manufacturing Centre, Center for Mechanical Engineering Studies, Universiti Teknologi MARA, Penang Branch ,MY
  • Pramodkumar Kataraki
     School of Mechanical Engineering, REVA University, Bangalore 560064 ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31242

Abstract

Electric iron pulls energy from the mains supply and heats a coil within then the heat is transferred to the bottom plate through conduction process which is placed against the wrinkled garment. The problem of existing dry iron is the heating element continues to get hotter until the power source is continuously drawn from electricity, do not heat up sufficiently, needed a continual charge from its platform every few minutes for prolonged use, cannot be heat up rapidly and fast aging problem. Hence, it is necessary to run the finite element analysis on electric iron part model. The simulation focusses on thermal analysis as it can ease the study related to the heat path and thermal design of simulated product that can be used to improve the efficiency of existing product. The 3D part models of electric iron and five different type of heating coil were designed. Rheological data and important properties of the electric irons were imported as a parameter database in the software to create the meshing on the model. The input parameters are heat power, heat flux and convection while the variable for the simulation process are design of heating coil, power supply, thickness of heating coil and material of soleplate. Based on the simulated part model, the features recommended is design coil 4 with power supply 1900W, coil thickness 0.0015m and ceramic soleplate as these variables has highest temperature and shortest steady state time.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

Binti Mat Nasir, N., Zubair, A. F., Mohd Rodzi, A. S., Noor, R. M., Hemdi, A. R., & Kataraki, P. (2023). Conduction Heat Study of Different Coil Design of Electric Iron. Journal of Mines, Metals and Fuels, 70(10A), 190–194. https://doi.org/10.18311/jmmf/2022/31242

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Copyright (c) 2023 Journal of Mines, Metals and Fuels

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

K. B. Sheng, S. M. Nasir, Z. Shayfull, and M. Fathullah, “Analysis on temperature distribution and efficiency of new electrical iron design,” AIP Conf. Proc., vol. 2030, no. November, 2018, doi: 10.1063/1.5066737. DOI: https://doi.org/10.1063/1.5066737

L. Meng and K. W. Eric Cheng, “Wireless power transfer technology for electric iron based on multi-coils induction heating design,” IET Power Electron., vol. 12, no. 10, pp. 2566–2577, 2019, doi: 10.1049/iet-pel.2018.6305. DOI: https://doi.org/10.1049/iet-pel.2018.6305

Y. Zou, T. Lu, and X. He, “Application of Finite Element Simulation Analysis and Calculation in Process Design Optimization,” Proc. - 2018 19th Int. Conf. Electron. Packag. Technol. ICEPT 2018, pp. 691–695, 2018, doi: 10.1109/ICEPT.2018.8480837. DOI: https://doi.org/10.1109/ICEPT.2018.8480837

R. Schwerz, S. Meyer, M. Roellig, K. Meier, and K. J. Wolter, “Finite element modeling on thermal fatigue of BGA solder joints with multiple voids,” Proc. Int. Spring Semin. Electron. Technol., pp. 380–385, 2011, doi: 10.1109/ISSE.2011.6053892. DOI: https://doi.org/10.1109/ISSE.2011.6053892

V. Zolekar, “Finite Element Analysis and Optimization of I.C. Engine Piston Using RADIOSS and OptiStruct,” Altair Technol. Conf., no. August, pp. 1–8, 2013.

I. Cabeza-Gil, B. Calvo, J. Grasa, C. Franco, S. Llorente, and M. A. Martínez, “Thermal analysis of a cooking pan with a power control induction system,” Appl. Therm. Eng., vol. 180, no. May, p. 115789, 2020, doi: 10.1016/j.applthermaleng.2020.115789. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115789

J. N. Ikediala, L. R. Correia, G. A. Fenton, and N. Ben-Abdallah, “Finite element modeling of heat transfer in meat patties during single- sided pan-frying,” J. Food Sci., vol. 61, no. 4, pp. 796–802, 1996, doi: 10.1111/j.1365-2621.1996.tb12205.x. DOI: https://doi.org/10.1111/j.1365-2621.1996.tb12205.x

T. Ozawa, “Thermal analysis - Review and prospect,” Thermochim. Acta, vol. 355, no. 1–2, pp. 35–42, 2000, doi: 10.1016/S0040-6031(00)00435-4. DOI: https://doi.org/10.1016/S0040-6031(00)00435-4

J. Thomas, L. Gritter, K. C. Koppenhoefer, J. S. Crompton, K. Orlando, and N. Molnar, “Thermal Analysis of Electronics Cabinet,” no. 5, pp. 2–5, 2019.

P. Bansal, K. Sharma, and S. Islam, “Thermal analysis of a new concept in a household clothes tumbler dryer,” Appl. Energy, vol. 87, no. 5, pp. 1562–1571, 2010, doi: 10.1016/j.apenergy.2009.10.029. DOI: https://doi.org/10.1016/j.apenergy.2009.10.029

Mohitlakmani, “Home appliance story,” no. November 2018, pp. 15–16, 2013, [Online]. Available: http://visual.ly/invention-home-appliances.

N. Bhati and S. Kakran, “Optimal Household Appliances Scheduling Considering Time Based Pricing Scheme,” 2018 Int. Conf. Power Energy, Environ. Intell. Control. PEEIC 2018, pp. 717–721, 2019, doi: 10.1109/PEEIC.2018.8665487. DOI: https://doi.org/10.1109/PEEIC.2018.8665487

M. Hailu Kebede, “Home Appliances Efficiency Improvements for Energy Conservation in Debre Berhan City; Ethiopia,” Am. J. Energy Eng., vol.6, no.2, p.10, 2018, doi: 10.11648/j.ajee.20180602.11. DOI: https://doi.org/10.11648/j.ajee.20180602.11

E. Iron, H. Element, E. Iron, and H. Element, “Your Current Position/ : PRODUCTS > Greatheat Electric Heater Technology CO ., Ltd .,” pp. 1–2, 2021.

A. D. Heater, P. Details, and C. Profile, “? ? 1 /3,” pp. 1–7, 2021.

S. Inquiry, “Low Price Bajaj Iron Element Explore Related Categories Send Inquiry,” pp. 1–3, 2021

TECHINFUS.com. (2018, May 25). Retrieved June 19, 2021, from Maximum and Minimum heating temperature of the electric iron: https://en.techinfus.com/dlya-chistoty-i-poryadka/utyug/temperatura.html

Most read articles by the same author(s)