Optimization of cutting parameters to improve power consumption and material removal rate in high efficiency milling
Authors
-
,MY
Rizal Mohamed Noor -
,MYMuhammad Izham Ramli
-
,MYAhmad Faiz Zubair
-
,MYAbdul Rahman Hemdi
-
,INPramodkumar Kataraki
DOI:
https://doi.org/10.18311/jmmf/2021/30149Keywords:
Optimization, high efficiency, carbon emission, energyAbstract
This study is an attempt to obtain a suitable combination of the milling parameters to optimize electrical power and material removal rate (MRR) in slot milling of aluminium 6061. Machining parameters of radial depth of cut (RDOC), feedrate (Fr) and axial depth of cut (ADOC) are optimized using high efficiency milling cutting strategy. The results are analyzed through response surface and ANOVA for power and MRR. Response surface optimization shows that the optimized results are RDOC=48.8 mm, Fr=3000 mm/min, ADOC=6mm. The error between the predicted and the confirmation results is 4.3%.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
Accepted 2022-04-28
Published 2022-04-28
References
EIA. Annual energy review, (2010): http://large.stanford. edu/ courses /2012/ph241 / druzgalski2 /docs /aer.pdf
IEA. Worldwide trends in energy use and efficiency: key insights from IEA indicator analysis, 2008, https:/ / www.iea.org/ publications/ freepublications / publication/Indicators_2008.pdf
Duflou JR, Sutherland JW, Dornfeld D, et al. (2012): Towards energy and resource efficient manufacturing: a processes and systems approach. CIRP Ann: Manuf Techn 2012; 61: 587–609.
Fang K, Uhan N, Zhao F, et al. (2011): A new shop scheduling approach in support of sustainable manufacturing. In: Proceedings of the 18th CIRP international conference on life cycle engineering, Technische Universita¨t Braunschweig, Braunschweig, Germany, 2–4 May 2011, pp. 305–310.
B. Öztürk, L. Uður, and A. Yildiz, (2019): “Investigation of effect on energy consumption of surface roughness in X-axis and spindle servo motors in slot milling operation,” Meas. J. Int. Meas. Conf., vol. 139, pp. 92– 102, doi: 10.1016/j.measurement. 2019.02.009.
L. Zhou, J. Li, F. Li, G. Mendis, and J. W. Sutherland, (2018): “Optimization Parameters for Energy Efficiency in End milling,” Procedia CIRP, vol. 69, no. May, pp. 312–317, doi: 10.1016/j.procir.2017.12.005.
N. Liu, Y. F. Zhang, and W. F. Lu, (2015): “A hybrid approach to energy consumption modelling based on cutting power: A milling case,” J. Clean. Prod., vol. 104, pp. 264–272, doi: 10.1016/j.jclepro.2015.05.049.
L. Harvey Performance Company, HEM Guidebook A Machinist’s Guide to Increasing Shop Productivity with High Efficiency Milling. Harvey Performance Company, LLC, 2017.
T. C. Strategies, (2021): “The Cutting Strategies and the Tools,” Modern Machine Shop Online.
M R Shivakumar and N Ashwini, (2019): Optimization of CNC Turning Operation Parameters of Aluminum Alloy 6061 with Multiple Performance Characteristics Using Taguchi Method and Grey Relational Analysis, International Journal of Mechanical Dynamics & Analysis, 5 (1), 1-4.
Mervin A. Herbert, Rashmi L Malghan and Karthik Rao M C, (2018): Machining Parameters Optimization of AA6061 Using Response Surface Methodology and Particle Swarm Optimization, International Journal of Precision Engineering and Manufacturing 19, 695- 704.
