Experimental Study of Polymer Matrix Composites using Polyester, HEMP and Calcium Silicate.

Jump To References Section

Authors

  • ,IN
  • Research Scholar, VTU, CPGS.Muddenahalli, Chikkaballapur. ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31238

Abstract

The present study deals with the preparation of polymer matrix composites with polyester resin as matrix and hemp as reinforced material and calcium silicate as filler particles’. The calcium silicate is available in powder form and it is known that, filler particle increases the mechanical properties of polymer matrix composites. In this project work the different percentage of calcium silicate is added in polyester resin to improve its hardness, strength and also mechanical properties of polyester resin. The objective of this project is to prepare PMCs using calcium silicate, hemp fibre and polyester resin using hand lay-up technique as per ASTM standards. In this project work, PMCs are prepared by varying three composition i.e. 2% CaSiO 3 + 5% hemp, and 93% polyester resin, 4% CaSiO3, 10% hemp and 86% polyester resin and 6% CaSiO 3, 15% hemp and 79% polyester resin. The experimental test will be carried on prepared PMCs and find out the different mechanical characteristics such as tensile strength, compression strength, flexural strength and also to study the dynamic behaviour of PMCs by using damping test with experimental set up.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

Prabha, S., & G.B., D. (2023). Experimental Study of Polymer Matrix Composites using Polyester, HEMP and Calcium Silicate. Journal of Mines, Metals and Fuels, 70(10A), 275–284. https://doi.org/10.18311/jmmf/2022/31238

 

References

Dr. K R Phaneesh, Text book of Material Science and Metallurgy, Sudha Publications, 2013.

Bhaskar. R, Thesis on unsaturated polyester/Inorganic mineral Nanocomposites, Preparation and Properties,2011.

M. Ramesh, Thesis on mechanical and machining characteristics of hybrid natural fibre Composites, 2014.

Puttaswamaiah.S P, Mir Shafiulla P, Mohamed Haneef, P Mahesh R Hallur “Mechanical Characterization & SEM Analysis of Calcium Silicate Reinforced Polyester Laminate” International Journal of Scientific & Engineering Research, Volume 5, Issue 6, June-2014, ISSN 2229-5518.

S. Sunil Kumar Reddy, S.P. Akbar Hussain “Development and Testing Of Natural Fiber Reinforced Composites With Polyester Resin” October, 2013] [2701-2706] IJESRT.ISSN: 2277-9655Impact Factor: 1.852.

K. Alagarraja1, A. Dhamodharan, K. Gopinathan, R. Mathan Raj, K. Ram Kumar. “Fabrication and testing of fibre reinforced polymer composites material”. IOSR Journal of Mechanical and Civil Engineering(IOSR-JMCE) e- ISSN: 2278-1684, P-ISSN : 2320–334X PP 27-34.

Mohammad Mehdi Jalili, SeyyedYahya Mousavi, Amir Soheil Pirayeshfar. “Flexural free vibration as a non-destructive test for evaluation of viscoelastic properties of polymeric composites in bending direction”. 12 March 2014 DOI 10.1007/s13726-014-0227.

H Ku, H Wang, N Pattarachaiyakoop, M Trada “A review on the tensile properties of natural fiber reinforced polymer composites”. Centre of Excellence in Engineered Fibre Composites and Faculty of Engineering, University of Southern Queensland.

Dr. P. S. Senthil Kumar, Karthik. K, Raja.T. “Vibration Damping Characteristics of Hybrid Polymer Matrix Composite”. International Journal of Mechanical & Mechatronics EngineeringIJMME-IJENS Vol:15 No:01.

Akash.D.A, Thyagaraj.N.R, Sudev.L.J “Experimental study of dynamic behaviour of hybridjute/sisal fibre reinforced polyester composites” International Journal of Science and Engineering Applications, Volume 2 Issue 8, 2013, ISSN-2319-7560.

N.Vijayasai, P.Nanda Kishore, Ch. premkumar “Investigation on Dynamic Behaviour of Hybrid Sisal/ Bagasse Fiber Reinforced Epoxy Composites” International Journal of Innovative Research in Advanced Engineering(IJIRAE) ISSN: 2349-2163 Volume 1 Issue 6 (July 2014).

Pradip Sature, Ashok Mache “Mechanical Characterization and Water Absorption Studies on Jute/Hemp Reinforced Hybrid Composites” American Journal of Materials Science 2015, 5(3C): 133-139 DOI: 10.5923/c.materials.201502.27.

Mohammed F. Aly, I. G. M. Goda, and Galal A. Hassan “Experimental Investigation of the Dynamic Characteristics of Laminated Composite Beams” International Journal of Mechanical & Mechatronics EngineeringIJMME-IJENS Vol:10 No:03.