Statical Significant Analysis of Hardness of Poly Vinyl Alcohol Crosslinked Glutaraldehyde Using Tukey HSD Method

Jump To References Section

Authors

  • Nagamadhu M
     Department of Mechanical Engineering, BMS Institute of Technology and Management, Bangalore-560064 ,IN
  • Sachinkumar Patil
     School of Mechanical Engineering. REVA University, Bengaluru, Karnataka 560064 ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31057

Keywords:

Glutaraldehyde, Polyvinyl Alcohol, Hardness, Tukey HSD Method, Crosslinking.

Abstract

The non-biodegradable polymer occupying the world leads to many issues concerning global warming and other related problems. Due to these issues, there is a need for biodegradable polymers to overcome these issues. This paper focussed on processing polyvinylalcohol (PVA) crosslinked with glutaraldehyde(GA) and studying the harness of crosslinked polymer. The polyvinylalcohol is crosslinked from 0 to 40 volume percent of glutaraldehyde than post cured immersed in 2 mole of Sulfuric acid (H2SO4) for 24 hours to attain complete crosslinking. The Excel Durometer Shore D Hardness tester was used to determine the hardness of PVA and PVA crosslinked GA polymer composites as per ASTM D2240 standards. The influence of glutaraldehyde crosslinking drastically improves the polymer's hardness by up to 15%, and further marginal changes are found. The Tukey HSD method is used to study the significant level and accomplish the optimum crosslinking percentage. From the Tukey HSD test, it is found that the f value more than 5.35 are high level statically significant.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

M, N., & Patil, S. (2023). Statical Significant Analysis of Hardness of Poly Vinyl Alcohol Crosslinked Glutaraldehyde Using Tukey HSD Method. Journal of Mines, Metals and Fuels, 70(10A), 90–96. https://doi.org/10.18311/jmmf/2022/31057

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Copyright (c) 2023 Journal of Mines, Metals and Fuels

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

T. Gurunathan, S. Mohanty, and S. K. Nayak (2015): A review of the recent developments in biocomposites based on natural fibres and their application perspectives. Composites: Part A Applied Science and Manufacturing 77: 1–25.

M. A. Dweib, B. Hu, H. W. Shenton, and R. P. Wool (2006): Bio-based composite roof structure: Manufacturing and processing issues. Composite Structures 74: 379-388.

G. Koronis, A. Silva, and M. Fontul (2013): Green composites: A review of adequate materials for automotive applications. Composite Part B: Engineering 44 (1): 120-127.

J. Qiu, X. Lim, and E. Yang (2016): Cement and Concrete Research Fatigue-induced deterioration of the interface between micro-polyvinyl alcohol (PVA) fiber and cement matrix. Cement and Concrete Research 90: 127–136.

Amaresh Gunge, Praveennath G. Koppad, M. Nagamadhu, S. B. Kivade, and K.V. Shivananda Murthy (2019): Study on mechanical properties of alkali treated plain woven banana fabric reinforced biodegradable composites. Composite Communication 13: 47-51.

J. C. Middleton and A. J. Tipton (2000): Synthetic biodegradable polymers as orthopedic devices. Biomaterials 21: 2335-2346.

M. J. John and S. Thomas (2008): Biofibres and biocomposites. Carbohydrate Polymers 71: 343-364.

B. Imre and B. Pukánszky (2013): Compatibilization in bio-based and biodegradable polymer blends. European Polymer Journal 49: 1215-1233.

Parinaz Sabourian, Masoud Frounchi and Susan Dadbin (2017): Polyvinyl alcohol and polyvinyl alcohol/polyvinyl pyrrolidone biomedical foams crosslinked by gamma irradiation. Journal of Cellular Plastics 53(4): 359–372.

Renbo Zhang, Liu Jin, Yudong Tian, Guoqin Dou, Xiuli Du (2019): Static and dynamic mechanical properties of eco-friendly polyvinyl alcohol fiber-reinforced ultra-high-strength concrete. Structural Concrete 1–13. DOI: 10.1002/suco.201800247

Teresa M Pique, Claudio J Pe´rez, Vera A Alvarez and Analý´a Va´zquez (2014): Water soluble nanocomposite films based on poly(vinyl alcohol) and chemically modified montmorillonites. Journal of Composite Materials 48(5): 545–553.

Eunsil Lee, Youjung Song and Seungsin Lee (2019): Crosslinking of lignin/poly (vinyl alcohol) nanocomposite fiber webs and their antimicrobial and ultraviolet-protective properties. Textile Research Journal 89(1): 3–12.

Jin Jeong and Seungsin Lee (2018) Electrospun poly (vinyl alcohol) nanofibrous membranes containing Coptidis Rhizoma extracts for potential biomedical applications, Textile Research Journal 1-13. https://doi.org/10.1177/0040517518813679.

Jagadish Naik, RF Bhajantri, Sunil G Rathod and Ishwar Naik (2019) Proton conducting diazonium hydrogen phosphate/poly (vinyl alcohol) electrolytes: Transport, electrical, thermal, structural, and optical properties. Journal of Elastomers & Plastics 51(5): 390–405.

Shadpour Mallakpour and Mohammad Dinari (2013): Enhancement in thermal properties of poly (vinyl alcohol) nanocomposites reinforced with Al2O3 nano-particles. Journal of Reinforced Plastics and Composites 32(4):217–224

Nor Hasrul Akhmal Ngadima, Noordin Mohd Yusof, Ani Idris, Denni Kurniawan and Ehsan Fallahiarezoudar (2017): Fabricating high mechanical strength γ-Fe2O3 nano-particles filled poly (vinyl alcohol) nanofiber using electrospinning process potentially for tissue engineering scaffold. Journal of Bioactive and Compatible Polymers 32(4): 411–428.

Jibril Al-Hawarin, Ayman S Ayesh and Essam Yasin (2013): Enhanced physical properties of poly(vinyl alcohol)-based single-walled carbon nanotube nanocomposites through ozone treatmentof singlewalled carbon nanotubes. Journal of Reinforced Plastics and Composites 32(17): 1295–1301.

Ci-jun Shuai, Zhong-zheng Mao, Zi-kai Han and Shu-ping Peng (2014): Preparation of complex porous scaffolds via selective laser sintering of poly(vinyl alcohol)/calcium silicate, Journal of Bioactive and Compatible Polymers 29(2): 110–120.

Elena Butnaru, Catalina Natalia Cheaburu, Onur Yilmaz, Gina Mihaela Pricope and Cornelia Vasile (2016) Poly (vinyl alcohol)/chitosan/montmorillonite nanocomposites for foodpackaging applications: Influence of montmorillonite content. High Performance Polymers 28(10): 1124–1138.

Amir H Navarchian, Mehdi Jalalian and Majid Pirooz (2015): Characterization of starch/poly (vinyl alcohol)/ clay nanocomposite films prepared in twin-screw extruder for food packaging application. Journal of Plastic Film & Sheeting 31(3): 309–336.

Bhasha Sharma, Parul Malik, Purnima Jain (2019): To study the effect of processing conditions on structural and mechanical characterization of graphite and graphene Oxide-reinforced PVA nanocomposite. Polymer Bulletin 76: 3841–3855.

Yuansen Liu, Qi Wang and Li Li, (2016): Reuse of leather shavings as a reinforcing filler for poly (vinyl alcohol). Journal of Thermoplastic Composite Materials 29(3): 327–343.

Shamima Eaysmine, Papia Haque, Taslima Ferdous, Md Abdul Gafur and Mohammed M Rahman (2016): Potato starch-reinforced poly (vinyl alcohol) and poly (lactic acid) composites for biomedical applications. Journal of Thermoplastic Composite Materials 29(11): 1536–1553.

Xiaohong Qin, Guanxian Dou, Guojun Jiang and Sai Zhang (2013): Characterization of poly (vinyl alcohol) nanofiber mats crosslinked with glutaraldehyde. Journal of Industrial Textiles 43(1): 34-44.

Subhakanta Nayak and Jyoti Ranjan Mohanty (2019): Study of Mechanical, Thermal, and Rheological Properties of Areca Fiber-Reinforced Polyvinyl Alcohol Composite. Journal of Natural Fibers 16(5): 688–701.

Y. Wang and Y. Lo Hsieh (2010): Crosslinking of polyvinyl alcohol (PVA) fibrous membranes with glutaraldehyde and peg diacylchloride. Journal of Applied Polymer Science 116: 3249-3255.

R. Rudra, V. Kumar, and P. P. Kundu (2015): Acid catalysed crosslinking of polyvinyl alcohol (PVA) by glutaraldehyde: effect of crosslink density on the characteristics of PVA membranesused in single chambered microbial fuel cells. RSC Advances 5(101): 83436–83447. doi:10.1039/c5ra16068e.

G.C. Mohan Kumar, P. Jeyaraj, M. Nagamadhu (2019): Dynamic mechanical analysis of glutaraldehyde crosslinked polyvinyl alcohol under tensile mode. AIP Conference Proceedings 020017, 2057 (1).

Kivade S.B., Gunge, A., Nagamadhu, M. (2022): Mechanical and dynamic mechanical behaviour of acetylation-treated plain woven banana reinforced biodegradable composites. Adv Compos Hybrid Mater 5, 144–158.

G. C. Mohan Kumar, P. Jeyaraj, and M. Nagamadhu, (2019): Dynamic mechanical analysis of glutaraldehyde cross linked polyvinyl alcohol under tensile mode AIP Conference Proceedings 2057, 020017.

Nagamadhu M&SB Kivade, (2021): Effect of multifrequency, boundary conditions of Polyvinyl Alcohol (PVA) crosslinked with Glutaraldehyde (GA) using dynamic mechanical analyzer, Advances in Materials and Processing Technologies.

Amaresh Gunge, Praveennath G. Koppad, M. Nagamadhu, S. B. Kivade, K.V. Shivananda Murthy, (2019): Study on mechanical properties of alkali treated plain woven banana fabric reinforced biodegradable composites, Composites Communications, 13, 47-51.

Nagamadhu M, Jeyaraj P, GC Mohan Kumar, (2019): Characterization and mechanical properties of sisal fabric reinforced polyvinyl alcohol green composites: effect of composition and loading direction, Materials Research Express, 6(12), 125320