Conversion and Management of Plastic Waste into useful Resources – A review
DOI:
https://doi.org/10.18311/jmmf/2022/32942Keywords:
Alternate fuel, Plastic waste, Pyrolysis, Recycle, Waste managementAbstract
The objective of this review paper is to focus few of the notable research that has been carried out to tackle the problems of disposal of plastic waste and its effective utilization into useful products. Due to less weight, low cost, non-corrosiveness of plastics have led to excessive usage and thus increasing its production resulting in the accumulation of waste plastic in the environment. The previous studies report several techniques to recycle and convert unwanted plastics into alternative fuels. This would be an added advantage to solve the problem of shortage of conventional fuel and thereby promote a sustainable environment. Nevertheless, further research is necessary to report some of the issues that have not yet been addressed.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Shafiee, S., Topal, E. When will fossil fuel reserves be diminished?. Energy Policy, 37, 2009, 181-189. DOI: https://doi.org/10.1016/j.enpol.2008.08.016
Balaji, S., Saravanan, R., & Natesan Kapilan. Influence of Propyl gallate antioxidant on performance and emissions of a compression ignition engine fuelled with Madhuca Indica B20 ester blends. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 43(18), 2021, 2197-2209. DOI: 10.1080/15567036.2019.1644396 DOI: https://doi.org/10.1080/15567036.2019.1644396
Balaji, S., Natesan Kapilan & Saravanan, R. Influence of Propyl gallate antioxidant on performance and emissions of a CI fueled with Neem oil biodiesel.Journal of Biofuels, 7(2), 2016, 62-70. DOI: 10.5958/ 0976-4763.2016.00009.X DOI: https://doi.org/10.5958/0976-4763.2016.00009.X
Balaji, S., Saravanan, R. & Natesan Kapilan. Influence of Pyrogallol antioxidant on performance and emissions of a ci fueled with neem oil biodiesel.International Journal of Mechanical Engineering and Technology, 8(8), 2017, 981-987. http:// www.iaeme.com/IJMET/issues.asp?JType= IJMET&VType=8&IType=8
Manzano-Agugliaro, F., Alcayde, A., Montoya, F.G., Zapata-Sierra, A., Gil, C. Scientific production of renewable energies worldwide: An overview.Renewable Sustainable Energy Review, 18, 2013, 134– 143. DOI: https://doi.org/10.1016/j.rser.2012.10.020
Nizami, A.S., Rehan, M., Ouda, O.K.M., Shahzad, K., Sadef, Y., Iqbal, T., Ismail, I.M.I. An argument for developing waste-to-energy technologies in Saudi Arabia. Chem. Eng. Transact, 45, 2015, 337–342. http:/ /dx.doi.org/10.3303/CET1545057
Miandad, R., Rehan, M., Ouda, O.K.M., Khan, M.Z., Ismail, I.M.I., Shahzad, K., Nizami, A.S. Waste-toHydrogen Energy in Saudi Arabia: Challenges and Perspectives. Bio hydrogen Production: Sustainability of Current Technology and Future Perspective (eds.), 2016, http://dx.doi.org/10.1007/978-81-322-3577-4_11.Springer India. DOI: https://doi.org/10.1007/978-81-322-3577-4_11
Serrano, D., Aguado, J., Rodriguez, J., Peral, A.Catalytic cracking of polyethylene over nanocrystal line HZSM-5: catalyst deactivation and regeneration study. J. Anal. Appl. Pyrol, 79, 2007, 456–464. DOI: https://doi.org/10.1016/j.jaap.2006.11.013
Ashworth, D.C., Elliott, P., Toledano, M.B. Waste incineration and adverse birth and neonatal outcomes: a systematic review. Environ. Int., 69, 2014, 120–132. DOI: https://doi.org/10.1016/j.envint.2014.04.003
Onwudili, J.A., Insura, N., Williams, P.T. Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: effects of temperature and residence time. J. Anal. Appl. Pyrol, 86, 2009, 293–303. DOI: https://doi.org/10.1016/j.jaap.2009.07.008
Neha Patni, Pallav Shah, Shruti Agarwal, and Piyush Singhal. Alternate Strategies for Conversion of Waste Plastic to Fuels. ISRN Renewable Energy, 2013, 1-7. DOI: https://doi.org/10.1155/2013/902053
Mella,J. Recycling of Polymers, Department of Process and Environmental Engineering, 2005, 1-9.
Aguado, J. and Serrano, D. Feedstock Recycling of Plastics Waste. The Royal Society of Chemistry, 2006.
<https://worldpopulationreview.com/countryrankings/ plastic-pollution-by-country> Last accessed June 2022.
Annual report 2019-20 on Implementation of Plastic waste Management Rules, 2016. <http://cpcb.nic.in/> Last accessed June 2022.
<https://www.indiatoday.in/science/story/plasticwasteindia-reliance-mukesh-ambani-1804331-2021-0519> Last accessed June 2022.
Kpere-Daibo, T.S. Plastic catalytic degradation study of the role of external catalytic surface, catalytic reusability and temperature effects [Doctoral thesis], University of London Department of Chemical Engineering University College London, WC1E 7JE.
Buekens, A. G., and Huang, H. Catalytic plastics cracking for recovery of gasoline-range hydrocarbons from municipal plastic wastes. Resources Conservation and Recycling, 23(3), 1998, 163–181. DOI: https://doi.org/10.1016/S0921-3449(98)00025-1
Li, C., Zhuang, H., Hsieh, L., Lee, W., and Tsao, M.PAH emission from the incineration of the plastic wastes. Environmental International, 27(1), 2001, 61-67. DOI: https://doi.org/10.1016/S0160-4120(01)00056-3
Lea, W. Plastics incineration versus recycling: a comparison of energy and landfill cost saving. Journal of Hazardous Materials, 47(1), 1996, 295-302. DOI: https://doi.org/10.1016/0304-3894(95)00117-4
Siddiqui, M., and Redhwi, H. Catalytic co-processing of waste plastics and petroleum residue into liquid fuel oils. Journal of Analytical and Advanced Pyrolysis, 86(1), 2006. DOI: https://doi.org/10.1016/j.jaap.2009.05.002
Chan, Y.H., Tan, R.R., Yusup, S., Lam, H.L., Quitain, A.T. Comparative life cycle assessment (LCA) of biooil production from fast pyrolysis and hydrothermal liquefaction of oil palm empty fruit bunch (EFB). Clean Technol. Environ. Policy, 1, 2016, 1–10, http:// dx.doi.org/10.1007/s10098-016-1172-5. DOI: https://doi.org/10.1007/s10098-016-1172-5
Anjum, M., Miandad, R., Waqas, M., Ahmad, I., Alafif, Z.O.A., Aburiazaiza, A.S., Barakat, M.A., Akhtar, T. Solid waste management in Saudi Arabia: a review. J. Appl. Agric. Biotechnol, 1 (1), 2016, 13–26.
Chen, D., Yin, L., Wang, H., He, P. Pyrolysis technologies for municipal solid waste: A review. Waste Manag. 34, 2014, 2466–2486. DOI: https://doi.org/10.1016/j.wasman.2014.08.004
Kumar, S., Singh, R.K. Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis. Braz. J.Chem. Eng, 28, 2011, 659–667. DOI: https://doi.org/10.1590/S0104-66322011000400011
Lopez, A., Marco d, I., Caballero, B.M., Laresgoiti, M.F., Adrados, A., Torres, A. Pyrolysis of municipal plastic waste II: influence of raw material Composition under catalytic conditions. Waste Management, 31, 2011, 1973-1983. DOI: https://doi.org/10.1016/j.wasman.2011.05.021
Chung, S.H., Park, J.J., Jeon, S.G., Kim, D.C. (2003). Pyrolysis of waste plastics using synthesized catalysts from fly ash. J. Ind. Eng. Chem. 9 (2), 2003, 181–187.
Sharma, B.K., Moser, B.R., Vermillion, K.E., Doll, K.M., Rajagopalan, N. Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags. Fuel Process. Technol.122, 2014, 79–90. DOI: https://doi.org/10.1016/j.fuproc.2014.01.019
Miskolczi, N., Angyal, A., Bartha, L., Valkai, I. Fuel by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor. Fuel Process Technology, 90, 2009, 1032–1040. DOI: https://doi.org/10.1016/j.fuproc.2009.04.019
Panda, A. K., Singh, R. K., and Mishra, D. K. Thermolysis of waste plastics to liquid fuel. A suitable method for plastic waste management and manufacture of value added products - a world prospective. Renewable and Sustainable Energy Reviews, 14(1), 2010, 233–248. DOI: https://doi.org/10.1016/j.rser.2009.07.005
Park, D.W., Hwang, E.Y., Kim, J.R., Choi, J.K., Kim, Y.A., Woo, H.C. Catalytic degradation of polyethylene over solid acid catalysts. Polym. Degrad. Stab, 65 (2), 1999, 193–198. DOI: https://doi.org/10.1016/S0141-3910(99)00004-X
Hazrat, M., Rasul, M., and Khan, M. A. Study on Thermo- Catalytic Degradation for Production of Clean Transport Fuel and Reducing Plastic Wastes. International Conference on Thermal Engineering, 105, 2015, 865-876. DOI: https://doi.org/10.1016/j.proeng.2015.05.108
Aboulkas, A., El-Harfi, K., and El-Bouadili, A. Thermal degradation behaviour of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanism. Energy Conversion and Management, 51(7), 2010, 1363-1369. DOI: https://doi.org/10.1016/j.enconman.2009.12.017
Mani, M., Subash, C., and Nagarajan, G. Performance Emission and Combustion Characteristics of a DI Diesel Engine Using Waste Plastic Oil. Journal of Applied Thermal Engineering, 29(13), 2013, 2738-2744. DOI: https://doi.org/10.1016/j.applthermaleng.2009.01.007
Singhad, R. P., Tyagib, V. V., Allen, T. An overview for exploring the possibilities of energy generation from municipal solid waste (MSW) in Indian scenario. Renewable and Sustainable Energy Reviews, 15(9), 2011, 4797– 4808. DOI: https://doi.org/10.1016/j.rser.2011.07.071
Di Blasi, C. Dynamic behaviour of stratified downdraft gasifier. Chemical Engineering Science, 55(15), 2000, 2931–2944. DOI: https://doi.org/10.1016/S0009-2509(99)00562-X
Hikmath, J.T., and Udara, S.P.R. Future Strategies in Plastic Waste Management in Srilanka. Journal of Research Technology and Engineering, 1(1), 2020, 63-71.