Investigations on IC Engine Piston Ring made of Composite Materials

Jump To References Section

Authors

  • Ankit Gupta
     Department of Mechanical Engineering, SGSITS, Indore, M.P. ,IN
  • Ashok Atulkar
     Department of Mechanical Engineering, SGSITS, Indore, M.P. ,IN
  • Rajkumar Porwal
     Department of Mechanical Engineering, SGSITS, Indore, M.P. ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31978

Keywords:

Piston Ring, Finite Element Analysis, SiC Reinforced ZrB2, A360, A2618.

Abstract

This paper is respecting the evaluation of stress distribution on IC engine (four-stroke) piston ring and analysis of finite element by using FEA software. The purpose of this analysis is to calculate strain for SiC reinforced ZrB2, A360, A2618 and deformation resulting through ring elastic pressure and gas pressure. The total deformation and strain on the piston ring have been obtained in this project. The characteristics of such vibrations are analyzed with the help of solid works software and analysis of finite element is performed on the Ansys workbench software. The material used is Silicon Carbide reinforced Zirconium Diboride (SiC reinforced ZrB2), Aluminium alloy (A360), Aluminium alloy (A2618). This is a ceramic matrix composite (CMC) which has good safety factor and lower cost. The experiment is conducted on three types of composites to evaluate the strain on SiC reinforced ZrB2, A360, A2618 resulting from the total deformation and strain. Compressive strength has also been analyzed for the structural model of the piston ring.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-12-08

How to Cite

Gupta, A., Atulkar, A., & Porwal, R. (2022). Investigations on IC Engine Piston Ring made of Composite Materials. Journal of Mines, Metals and Fuels, 70(8A), 1–7. https://doi.org/10.18311/jmmf/2022/31978

Issue

Volume 70, Issue 8A, August 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Kiran S, Palanivendhan M, Kumar M. Modeling and Analysis of Pistons and Piston Rings of SI Engines for Various Materials Using FEM. In IOP Conference Series: Materials Science and Engineering 2020, (Vol. 993, pp. 012155-1—012155-16). DOI: https://doi.org/10.1088/1757-899X/993/1/012155

Koszalka G, Suchecki A. Analysis of design parameters of pistons and piston rings of a combustion engine. In MATEC Web of Conferences (2017), (Vol. 118, pp. 00013-1—00013-5). DOI: https://doi.org/10.1051/matecconf/201711800013

Kurbet SN, Kumar RK. Mechanics and Stress Analysis of Piston Ring in Multibody Single Cylinder Internal Combustion Engine-Fe Analysis. SAE Technical Paper; (2001), (Vol. 2, pp. 368). DOI: https://doi.org/10.4271/2001-01-3371

Jayanth P, Sangeeth Kumar E. Investigation and Analysis of Wear Reduction in Piston Rings through Coating. In Applied Mechanics and Materials (2015), (Vol. 813 pp. 874-879). DOI: https://doi.org/10.4028/www.scientific.net/AMM.813-814.874

Krishnan BR, Ramesh M. Experimental evaluation of Al-Zn-Al2O3 composite on piston analysis by CAE tools. Mechanics and Mechanical Engineering. (2019), (Vol 1 pp. 212-217). DOI: https://doi.org/10.2478/mme-2019-0028

Satyanarayana I, Renuka D. Design and analysis of piston and piston rings with cast iron, aluminium alloy and cast steel materials. IJISET—Int J Innov Sci Eng. Technol. (2016), (Vol. 3, pp. 104-111).

Rajam CV, Murthy PV, Krishna MM. Non-linear static structural analysis of optimized piston for bio-fuel using Ansys. International Journal of Management, IT and Engineering. (2014), (Vol. 4, pp. 148-168).

Srinadh M, Rajasekhara KB. Static and thermal analysis of piston and piston rings. International Journal of Engineering Technology, Management and Applied Sciences. (2015), (Vol. 3, pp. 51-58).

Gopi E, Saleem M, Chandan S, Nema A. Thermal and static analysis of engine piston rings. International Journal of Ambient Energy. (2019), (pp. 1-5). DOI: https://doi.org/10.1080/01430750.2019.1636875

Mereuta V. Static and Thermal Analysis of Piston using FEM Analysis. International Journal for Research in Applied Science & Engineering Technology. (2018), (Vol. 6, pp. 2321-9653). DOI: https://doi.org/10.22214/ijraset.2018.1032

Anugu AR, Reddy NV, Venkateswarlu D. Theoretical modelling and finite element analysis of automobile piston. Materials Today: Proceedings. (2021), (Vol. 45, pp. 1799-1803). DOI: https://doi.org/10.1016/j.matpr.2020.08.741

Kumar KS. Design and analysis of IC engine piston and piston-ring on composite material using CREO and ANSYS software. Journal of Engineering and Science. (2016), (Vol. 01, pp. 39-51).

Singh U, Lingwal J, Rathore A, Sharma S, Kaushik V. Comparative analysis of different materials for piston and justification by simulation. Materials Today: Proceedings. (2020), (Vol. 25, pp. 925-930). DOI: https://doi.org/10.1016/j.matpr.2020.03.078

Darwai M, Kulshrestha A. A Review Paper on Steady State Thermal Analysis of Piston Using Composite Material. International Journal of Scientific Research in Science and Technology. (2017), (Vol. 3, pp. 635-642).

Jain S, Khare N, and Sahu D. Analysis of engine piston and piston ring using CATIA and ANSYS for attaining higher Efficiency. (2015), (Vol. 4, pp. 29-35).

Jog S, Anthony K, Bhoinkar M, Kadam K, Patil MM. Modelling and analysis of IC engine piston with composite material (AlSi17Cu5MgNi). In International Conference on Reliability, Risk Maintenance and Engineering Management (2019), (pp. 159-169). DOI: https://doi.org/10.1007/978-981-13-8507-0_25

Rama PV, Krishna MP. Design and Analysis of IC Engine Piston with Different Materials. (2018), (Vol. 05, pp. 871-878).

Lu X, Li Q, Zhang W, Guo Y, He T, Zou D. Thermal analysis on piston of marine diesel engine. Applied Thermal Engineering. (2013), (Vol. 50(1), pp. 168-176). DOI: https://doi.org/10.1016/j.applthermaleng.2012.06.021

Bhagat AR, Jibhakate YM. Thermal Analysis and Optimization of IC Engine Piston using finite element method. Gas. (2012), (Vol. 2(1), pp. 676-680).

Singh AR, Sharma PK. Design, analysis and optimization of three aluminium piston alloys using FEA. PARAMETERS. (2014), (Vol. 4, pp. 94-102).

Sonar DK, Chattopadhyay M. Theoretical analysis of stress and design of piston head using CATIA & ANSYS. International Journal of Engineering Science Invention. (2015), (Vol. 4, pp. 52-61).

Santhosh MG. Static Structural, Fatigue and Thermal Analysis of marine Engine Piston and Piston ring Comparing with three different Materials. (2020), (Vol. 9, pp. 471-482).

Moosavian H, Emamy M, Arani MM, Mahboubi S. The Study of Microstructures and Tensile Properties of an In Situ A356-ZrB2 Metal Matrix Composite. In Key Engineering Materials (2013), (Vol. 553, pp. 29-33). DOI: https://doi.org/10.4028/www.scientific.net/KEM.553.29

Ramesh CS, Pramod S, Keshavamurthy R. A study on microstructure and mechanical properties of Al 6061–TiB2 in-situ composites. Materials Science and Engineering: A. (2011), (Vol. 528, pp. 4125-4132). DOI: https://doi.org/10.1016/j.msea.2011.02.024

Dinaharan I, Murugan N. Microstructure and some properties of aluminium alloy AA6061 reinforced in situ formed zirconium diboride particulate stir cast composite. International Journal of Cast Metals Research. (2014), (Vol. 27, pp. 115-121). DOI: https://doi.org/10.1179/1743133613Y.0000000097

Andoko, Puspitasari P. Finite element analysis of surface tension on piston due to pressure variation. In AIP Conference Proceedings (2016), (Vol. 1778, pp. 030064-1—030064-7). DOI: https://doi.org/10.1063/1.4965798

Chougule SS, Khatawate VH. Piston strength analysis using FEM. International Journal of Engineering Research and Applications (IJERA). (2013), (Vol. 3, pp. 1724-1731).

Munyao EM, He JG, Zhiyuan Y, Yi ZX. Simulation of Thermal-Mechanical Strength for Marine Engine Piston Using FEA. Journal of Engineering Research and Applications. (2014), (Vol. 4, pp. 319-323).

Sharma S, Dhakar PS. A Review Study of Steady State Thermal Analysis of Piston by Finite Element Method (FEM). International Journal of IC Engines and Gas Turbines. (2018), (Vol. 3, pp. 34-39).

John A, Mathew JT, Malhotra V, Dixit N. Design and analysis of piston by Sic composite material. International Journal for Innovative Research in Science & Technology. (2015), (Vol. 1, pp. 578-590).