Volume 70, Issue 8A, August 2022

Articles

• Investigations on IC Engine Piston Ring made of Composite Materials

  Ankit Gupta, Ashok Atulkar, Rajkumar Porwal (Author)

  1-7

  Keywords:

  Piston Ring, Finite Element Analysis, SiC Reinforced ZrB2, A360, A2618.

  • PDF ²⁶⁶

  Abstract views: 516 times| Download: 266 times| https://doi.org/10.18311/jmmf/2022/31978

• An Overview of Nano-Catalysts in Biodiesel Production

  R. Ravikumar, K. Kiran, Gurumoorthy S. Hebbar, H. Naresh, Sajna P. Panigrahi (Author)

  8-15

  Keywords:

  Biodiesel, Nanoparticles, Reaction Speed, Mass Transport Properties.

  • PDF ¹⁸⁸

  Abstract views: 343 times| Download: 188 times| https://doi.org/10.18311/jmmf/2022/31998

• Corrosion Characterization of Friction Stir Weld Dissimilar Aluminium Alloy Joints

  K. Ramesha, N. Santhosh, H. Naresh (Author)

  16-22

  Keywords:

  Potentiodynamic, Aluminium Alloys, Characterization, Corrosion, Friction Stir Welding, Dissimilar.

  • PDF ¹³¹

  Abstract views: 187 times| Download: 131 times| https://doi.org/10.18311/jmmf/2022/32003

• Microhardness and Microstructure of Thin-Film Metallic and Non-Metallic Coating on Fiber Reinforced Polymer Substrate

  K. Chandrappa, Anoop Joshi (Author)

  23-31

  Keywords:

  Fiber Reinforced Polymer, Plasma Coating, Micro-Hardness, Micro-Structure, Metallization.

  • PDF ¹³⁴

  Abstract views: 204 times| Download: 134 times| https://doi.org/10.18311/jmmf/2022/32005

• Outlook of Density Maximum on the Onset of Forchheimer-Bénard Convection with throughflow

  Sowbhagya . (Author)

  32-40

  Keywords:

  Convection, Maximum Density, Porous Medium, Vertical Throughflow, Galerkin Technique.

  • PDF ⁷⁹

  Abstract views: 124 times| Download: 79 times| https://doi.org/10.18311/jmmf/2022/32007

• A Performance Study on Heat Transfer Using Different Heat Sink by Experimentation and Optimization Method

  S. Sushma, T. K. Chandrashekar, S. B. Nagesh, H. Naresh (Author)

  41-48

  Keywords:

  Forced Convection, Heat Sink, Heat Transfer, Optimization, Taguchi.

  • PDF ¹³⁰

  Abstract views: 218 times| Download: 130 times| https://doi.org/10.18311/jmmf/2022/32008

• QSPR Analysis of Polycyclic Aromatic Hydrocarbons

  Ishita Sarkar, N. Manjunath, K. Ramesha (Author)

  49-55

  Keywords:

  Equitable Zagreb Index, Polynomial, Polycyclic Aromatic Hydrocarbon.

  • PDF ¹⁰⁹

  Abstract views: 171 times| Download: 109 times| https://doi.org/10.18311/jmmf/2022/32009

• The Effect of MWCNT and GNP on the Flame Retardant Properties of Glass Fiber Reinforced Composites

  Rashmi ., B. M. Madhu``, Poornima ., J. Sundara Rajan (Author)

  56-62

  Keywords:

  Flame Parameters, Nanomaterials, Cone Calorimetry, Nanotechnology.

  • PDF ¹²⁵

  Abstract views: 260 times| Download: 125 times| https://doi.org/10.18311/jmmf/2022/32010

• Comparative Study on the Effect of Aluminium Trihydrate and Carbon Nanofillers on Thermal Properties of Glass Fiber Reinforced Epoxy Composites

  B. M. Madhu, Rashmi ., R. R. N. Sailaja, J. Sundara Rajan (Author)

  63-69

  Keywords:

  Differential Scanning Calorimetry, Thermal Kinetics, GFRP Composites.

  • PDF ¹²³

  Abstract views: 195 times| Download: 123 times| https://doi.org/10.18311/jmmf/2022/32011

• Green Synthesis of MgO Nanoparticles Using Caesalpinia Sappan Seeds and their Application for Direct Conversion of Alcohol to Azide

  H. S. Lalithamba, K. Divyarani, S. Sreenivasa, T. Madhu Chakrapani Rao (Author)

  70-76

  Keywords:

  Caesalpinia Sappan, Green Synthesis, MgO NPs, ADMP and Amino Alkyl Azide.

  • PDF ¹¹³

  Abstract views: 161 times| Download: 113 times| https://doi.org/10.18311/jmmf/2022/32012

• A Review on Non-Linear and Mathematical Modelling for Stiffness Characteristics of Linear Motion Guide Ways

  Sayaji Balasaheb Patil, Sanjay Hari Sawan (Author)

  77-85

  Keywords:

  Linear Motion Guideways, Rolling Element, Stiffness, Combined Stiffness, Non-Linear Behaviour, Mathematical Model.

  • PDF ¹¹⁹

  Abstract views: 141 times| Download: 119 times| https://doi.org/10.18311/jmmf/2022/32013

• Effect of Process Parameters on Tensile Behaviour of FSW AA 6061-AA 7075 Reinforced with TiO₂ Particles Using Statistical Approach

  K. C. Mahendra, C. G. Sreenivasa, H. M. Anil Kumar, Veerabhadrappa Algur (Author)

  86-95

  Keywords:

  ANOVA, Friction Stir Welding, Larger is Better, Orthogonal Array, Taguchi Technique.

  • PDF ⁹⁷

  Abstract views: 169 times| Download: 97 times| https://doi.org/10.18311/jmmf/2022/32014

• Microstructure, Physical and Tensile Behaviour of B₄C Particles Reinforced Al7010 Alloy Composites

  Kotresha Mydur, S. Mahendra Kumar, Madeva Nagaral, V. Bharath, V. Auradi (Author)

  96-102

  Keywords:

  Al7010 Alloy, B₄C, Microstructure, Hardness, Tensile Behaviour, Fractography.

  • PDF ¹¹⁷

  Abstract views: 149 times| Download: 117 times| https://doi.org/10.18311/jmmf/2022/32015

• Influence of Casting Die Diameter Size on Microstructure and Mechanical Fractrography of Al-7Si Alloy with Flyash and Graphite Composites

  N. Nagaraj, K. V. Mahendra, Madeva Nagaral, V. Bharath, V. Auradi, Subbaraya Mohan Kumar (Author)

  103-111

  Keywords:

  Al-7Si Alloy, Graphite, Fly Ash, Microstructure, Tensile Strength, Hardness.

  • PDF ¹²⁵

  Abstract views: 174 times| Download: 125 times| https://doi.org/10.18311/jmmf/2022/32016

• Studies on Effective Usage of SAP ERP Tool to Control Materials Planned Delivery Time in Oil and Gas Industries

  J. S. Sambhaji, S. N. Lakshminarasimhan, Basavaraj Ganiger (Author)

  112-116

  Keywords:

  SAP ERP Tool, Planned Delivery Time, Materials Planning, Master Production Schedule and Capacity Planning.

  • PDF ¹⁹⁴

  Abstract views: 272 times| Download: 194 times| https://doi.org/10.18311/jmmf/2022/32025

• Regenerative Electric Aircraft Taxi System

  T. K. Abhishek, K. R. Vishwaretha, Athulya Rag Edayillam, P. V. Megha, C. J. Vrishab, Nikhil H. Prasad (Author)

  117-121

  Keywords:

  Electrification, Fuel Efficiency, Electric Motor, Fuel Consumption.

  • PDF ¹²⁰

  Abstract views: 201 times| Download: 120 times| https://doi.org/10.18311/jmmf/2022/32026

• Performance Analysis of Solar Water Heater with Various Working Fluids

  S. V. Vimal, S. S. Surya (Author)

  122-127

  Keywords:

  Heat Pipe, Exergy Analysis, Latent Heat, Thermosyphon Water Heating System.

  • PDF ⁹⁰

  Abstract views: 128 times| Download: 90 times| https://doi.org/10.18311/jmmf/2022/32028

• Experimental Investigation on Comparing Mechanical Properties in 3D Printed Polymers by Varying Process Parameter

  K. P. Aveen, Neelakantha V. Londe, K. Vikas, Suman Yadav Lettigar, V. Kishan Kumar, Dhananjay Jagdish (Author)

  128-134

  Keywords:

  3D Printing, Flexural & Tensile Characterization.

  • PDF ¹³¹

  Abstract views: 239 times| Download: 131 times| https://doi.org/10.18311/jmmf/2022/32030

• Green Synthesis, Characterization and Electrical Properties of Iron Doped Vanadium Oxide for Strain Gauges

  T. R. Kishan Chand, H. M. Kalpana, H. S. Lalithamba (Author)

  135-143

  Keywords:

  Nanoparticles, Vanadium Oxide, Iron, Electrical Properties, Strain Gauge.

  • PDF ¹²⁷

  Abstract views: 208 times| Download: 127 times| https://doi.org/10.18311/jmmf/2022/32031

• Mechanical Characterization of Balsa Wood, Depron and Glass Fiber Composite for Aircraft Floor Panel and Luggage Compartment

  T. K. Abhishek, Sujesh Kumar, N. S. Channabasavesh, S. Shashank, B. Shiva Chaitanya, B. S. Siddesh (Author)

  144-148

  Keywords:

  Balsa Wood, Depron, E-Glass Fibre.

  • PDF ¹¹²

  Abstract views: 237 times| Download: 112 times| https://doi.org/10.18311/jmmf/2022/32034

• Study of Electrical and Magnetic Properties of Zn-Co-Ferrite Nanocomposites

  R. Santhosh Kumar, Rashmi ., H. S. Lalithamba (Author)

  149-154

  Keywords:

  Soft Magnetic Materials, Combustion Synthesis Method, Permeability, Resistivity and Dielectric Constant.

  • PDF ¹²⁹

  Abstract views: 271 times| Download: 129 times| https://doi.org/10.18311/jmmf/2022/32035

• Design and Fabrication of Multi-Utility Spraying UAV

  H. R. Praneeth, Shreekant Patil, D. Dhanush, A. M. Manoj, Preetham B. Gowda, Ranjan Mahadev Kardigudi (Author)

  155-160

  Keywords:

  Autonomous Agricultural Drone, Spraying Pesticides, Aerial Mapping, Crop Health Monitoring.

  • PDF ¹⁴⁴

  Abstract views: 180 times| Download: 144 times| https://doi.org/10.18311/jmmf/2022/32036

• Influence of Hot Forging and Heat Treatment on Mechanical Properties of D-Series Cutting Tools

  H. S. Shivashankar, T. S. Siddaligaprasad, Basavaraj Ganiger, T. M. Chandrashekharaiah (Author)

  161-166

  Keywords:

  D2 and D3 Steel Tool, Forging, Heat Treatment, Hardness, Impact Strength, Wear Resistance, Micostructure.

  • PDF ¹⁰⁶

  Abstract views: 152 times| Download: 106 times| https://doi.org/10.18311/jmmf/2022/32037

• Preparation and Evaluation of Hardness and Wear Properties of WC-Co Particulates Reinforced 7075Al Composites

  U. B. Gopal Krishna, B. Vasudeva, Virupaxi Auradi, Madeva Nagaral (Author)

  167-174

  Keywords:

  Aluminium, Metal Matrix Composites, Tungsten Carbide, Wear and Hardness.

  • PDF ¹⁰⁴

  Abstract views: 137 times| Download: 104 times| https://doi.org/10.18311/jmmf/2022/32038

• Mechanical Characterization of Hybrid Polymer Composite for Marine Application

  Abdul Raheem, K. M. Subbaya, Harish ., C. K. Vikram (Author)

  175-180

  Keywords:

  No Keywords.

  • PDF ¹¹⁹

  Abstract views: 352 times| Download: 119 times| https://doi.org/10.18311/jmmf/2022/32039

• Wear Characteristics of Hybrid Polymer Composite Manufactured by Hand Layup Technique Using Fuzzy Logic Systems

  Abdul Raheem, K. M. Subbaya, C. K. Vikram, Syed Imran Ali (Author)

  181-187

  Keywords:

  No Keywords.

  • PDF ¹⁰¹

  Abstract views: 240 times| Download: 101 times| https://doi.org/10.18311/jmmf/2022/32040

• Finite Element Analysis of Hybrid Skin Sandwich Composite

  Akhilesh Rao, S. J. Niranjana, S. Shivakumar, K. Kiran, Sharathchandra ., H. Naresh, H. P. Sampath (Author)

  188-199

  Keywords:

  Sandwich Structured Composite, Aluminium Alloy, Areca Fibre, ANSYS Mechanical APDL.

  • PDF ¹⁴³

  Abstract views: 259 times| Download: 143 times| https://doi.org/10.18311/jmmf/2022/32041

• Experimental Investigation on Drilling of Fiber Metal Laminates Using Grey Based Taguchi Approach

  K. Lakshmi Kala, K. Prahlada Rao (Author)

  200-206

  Keywords:

  FML, Delamination, Drill Geometry, Drilling, Cutting Parameters, ANOVA.

  • PDF ⁹³

  Abstract views: 115 times| Download: 93 times| https://doi.org/10.18311/jmmf/2022/32042

• Impact of Stock Splits on Stock Returns and Liquidity of the Selected Firms : A Study from NSE

  K. P. Hemanth Kumar, R. Shashidhar, P. Paramashivaiah (Author)

  207-214

  Keywords:

  Stock Splits, Abnormal Return, Liquidity and Derivatives.

  • PDF ¹⁴⁸

  Abstract views: 188 times| Download: 148 times| https://doi.org/10.18311/jmmf/2022/32043

• Force Sensitive Resistors : A New and Emerging Field of Research in Conducting Polymers

  S. Bhargav, J. Sundara Rajan (Author)

  215-221

  Keywords:

  Conducting Polymers, Force Sensitive Resistors, Carbon Fillers, Electrical Percolation, Force Sensor, Quantum Tunnelling.

  • PDF ⁹⁶

  Abstract views: 145 times| Download: 96 times| https://doi.org/10.18311/jmmf/2022/32044

• Novel Coir/Chitosan Composites for Packaging Applications

  Bharathi V, Anilchandra A.R, Siddesh B Shankar, Shantanu Sanjay Sangam, Shreyas. S (Author)

  222-227

  Keywords:

  Biomaterials, Composite materials, Organic, Laminates

  • PDF ¹⁴⁶

  Abstract views: 164 times| Download: 146 times| https://doi.org/10.18311/jmmf/2022/31976

• Structural, Optical and Electrical Properties of ATO Nanoparticles Synthesized by Combustion Method

  Chaitra C, H.M Kalpana, H.S Lalithamba, C.M Ananda (Author)

  228-232

  Keywords:

  Green synthesis, antimony doped tin oxide (ATO), nanoparticles, combustion method

  • PDF ⁹⁷

  Abstract views: 151 times| Download: 97 times| https://doi.org/10.18311/jmmf/2022/31979

• Design Optimization of Electrical Connector Assembly using FEA

  Rajini Rohith, Shivakumar S, Niranjana S J, Umesh V, Darshan S M, Jangam sasidhar (Author)

  233-237

  Keywords:

  Electrical Connector, housing latch, ANSYS Mechanical APDL

  • PDF ¹¹⁰

  Abstract views: 201 times| Download: 110 times| https://doi.org/10.18311/jmmf/2022/31981

• Statistical Analysis of Friction-Stir Welding of Al- 6063 Alloys

  Bharathi V, B R Ramji, Prabhu Swamy N R, Anil Chandra A R (Author)

  238-245

  Keywords:

  Aluminum 6063 alloy, FSW, Hardness, Fractography, Minitab-17 analysis

  • PDF ¹⁰⁷

  Abstract views: 172 times| Download: 107 times| https://doi.org/10.18311/jmmf/2022/31982

• Temperature Effect on Non-Vacuum Solid State Diffusion Bonded Joints of Al 2014

  Manjunath Vatnalmath, V Auradi, Sudhakar M, Jeevan T R, Vinod M L, Amoghavarsha K S (Author)

  246-251

  Keywords:

  Inter-diffusion, solid state bonding, TLP bonding, interface, microstructure

  • PDF ¹⁰¹

  Abstract views: 130 times| Download: 101 times| https://doi.org/10.18311/jmmf/2022/31983

• Multi-Objective Optimization of Plate-Fin Heat Exchanger Using Taguchi-based Grey Relational Analysis

  Thara R, Irfan G, Lohitesh Jaga Kumar, Jagadeesh P Ganjigatti (Author)

  252-261

  Keywords:

  Design constraints, Reynolds’s no, Nusselt no, core area, core length, fin height, friction factor, taguchi, Response surface methodology

  • PDF ⁹³

  Abstract views: 149 times| Download: 93 times| https://doi.org/10.18311/jmmf/2022/31984

• Experimental Investigations to Study the Influence of Thickness and Speed of Aluminum Discs on Brake Parameters with Neodymium – Iron – Boron Magnets

  G. L. Anantha Krishna (Author)

  262-265

  Keywords:

  Eddy current; Permanent magnets; NdFeB magnets; Aluminum; percentage of reduction in speed; Negative acceleration; time consumed

  • PDF ⁸²

  Abstract views: 106 times| Download: 82 times| https://doi.org/10.18311/jmmf/2022/31985

• Investigation on Strain Sensitivity and Temperature Behaviour of Nitrogen Doped 3C-SiC Thin Films

  H.K.E Latha, Mala S, A. Udayakumar (Author)

  266-272

  Keywords:

  LPCVD, MTS, 3C-SiC thin film, TCR, strain sensitivity

  • PDF ¹⁰²

  Abstract views: 146 times| Download: 102 times| https://doi.org/10.18311/jmmf/2022/31986

• Effect of Hybrid Fillers on Electrical, Thermal and Mechanical Properties of Glass Epoxy Composites

  Bommegowda K. B (Author)

  273-281

  Keywords:

  Epoxy resin, micro and nano fillers, electrical properties, thermal properties, mechanical properties

  • PDF ¹³³

  Abstract views: 128 times| Download: 133 times| https://doi.org/10.18311/jmmf/2022/31987

• Cyclic Thermomechanical Analysis of Polyethylene Glycol Based Shape Memory Polymers

  Ranganatha Swamy MK, U S Mallikarjun, V Udayakumar (Author)

  282-289

  Keywords:

  Shape Memory Polymers, Cyclic thermomechanical test, Dynamic mechanical analysis, Shape Fixity, Shape Recovery

  • PDF ⁹⁸

  Abstract views: 122 times| Download: 98 times| https://doi.org/10.18311/jmmf/2022/31988

• Comparative Studies on Solar Assisted Silica Gel- Water and Activated Carbon-Methanol Based Adsorption Refrigeration System

  Ashok Kumar K, N. Kapilan, S Kasthurirengan (Author)

  290-297

  Keywords:

  Refrigeration, adsorption, Solar energy, working pair, COP

  • PDF ¹¹⁷

  Abstract views: 184 times| Download: 117 times| https://doi.org/10.18311/jmmf/2022/31989

• Experimental Investigations and Numerical Modelling of Compression Ignition Engine Fuelled With Diesel and Biodiesel Blend

  Manjunatha Swamy K M, Kirankumar K R, Manjunath H (Author)

  298-306

  Keywords:

  Dual fuel, waste coconut oil, CFD, FORTE, Performance

  • PDF ¹⁵³

  Abstract views: 213 times| Download: 153 times| https://doi.org/10.18311/jmmf/2022/31990

• Advances in the Study of Phase Change Materials and Ne-PCMs for the Storage of Energy Applications

  Pradnya Deshpande, Priyanka Gowda, Jyothilakshmi R., Shnmugapriya N (Author)

  307-316

  Keywords:

  PCM, Ne-PCM, Synthesis of PCM, Solar energy

  • PDF ¹⁰²

  Abstract views: 242 times| Download: 102 times| https://doi.org/10.18311/jmmf/2022/31991

• Agricultural Pest and Disease Detection in Banana Plant

  Keshava Murthy G N, Divya A, Jnana Shree K J, Ranjitha M R, Thanushree S (Author)

  317-323

  Keywords:

  Image processing, TensorFlow lite, RGB 3D Color model, gray scale image, Object detection

  • PDF ¹⁵⁴

  Abstract views: 214 times| Download: 154 times| https://doi.org/10.18311/jmmf/2022/31992

• Characterization and Evaluation of Shape Memory Effect of Cu-Zn-Al Shape Memory Alloy

  Lokesh N, U S Mallik, Shivasiddaramaiaha A G, Mohith T N, Praveen N (Author)

  324-331

  Keywords:

  Shape Memory Alloy; Shape Memory Effect; Cu-Zn-Al; Martensite

  • PDF ¹⁶⁸

  Abstract views: 344 times| Download: 168 times| https://doi.org/10.18311/jmmf/2022/31993

• FEA and Experimental Investigation of Prosthetic Knee Joint

  C. Shashishekar, S. J. Sanjay, Shreekant M.T (Author)

  332-338

  Keywords:

  Finite element analysis, Polariscope, Knee joint, Tibial, Femur, Flexion angle, Sagittal radius

  • PDF ¹²⁰

  Abstract views: 223 times| Download: 120 times| https://doi.org/10.18311/jmmf/2022/31994

• Comparative Analysis of LUO Converter with and Without MPPT for PV Applications

  Bhumika K S, Madhumitha G, Priya S, Rajesh Uppara (Author)

  339-345

  Keywords:

  Power consumption, Luo Converter, MPPT, Photovoltaic panel

  • PDF ¹⁰¹

  Abstract views: 197 times| Download: 101 times| https://doi.org/10.18311/jmmf/2022/31995

• Quality Management Systems Implementation In Tmeic Motor Factory

  Chayan Chatterjee, K R Shankarprasad (Author)

  346-354

  • PDF ¹⁰³

  Abstract views: 106 times| Download: 103 times| https://doi.org/10.18311/jmmf/2022/31996

• A Review Article on FeMnAlNi Shape Memory Alloy

  Roshith Kumar R V, Prashantha S, Adarsh S H, P C Arun Kumara (Author)

  355-359

  Keywords:

  Shape memory alloy, Superelasticity, FeMnAlNi alloy

  • PDF ¹⁷³

  Abstract views: 334 times| Download: 173 times| https://doi.org/10.18311/jmmf/2022/31997

• Computation of the Aerodynamic Forces, Design and Development of an Orinthopter

  Nishanth P, Haseebuddin M R, Pranav Srinath, Naba Saleel, Pannaga Hegde, Mohan Das A N (Author)

  360-369

  Keywords:

  Aerodynamic forces, ornithopter, micro aerial vehicles, flapping-wing model

  • PDF ¹³²

  Abstract views: 220 times| Download: 132 times| https://doi.org/10.18311/jmmf/2022/31999

• Impact of Ordering Decisions on Performance of a Supply Chain – An Experimental and Simulation Study

  T. Chinna Pamulety, V. Madhusudanan Pillai (Author)

  370-375

  Keywords:

  Supply chain, inventory policies, supply chain performance

  • PDF ⁹⁹

  Abstract views: 149 times| Download: 99 times| https://doi.org/10.18311/jmmf/2022/32000

• GO: Ag Composites Materials for Dynamic Humidity Sensing Applications

  Selel Jain, Shridhar Mundinamani, Murthy Shekhar S (Author)

  376-380

  Keywords:

  Graphene oxide, silver crystallite, composites, Scherrer formula, Rietveld refinement, Inter-Digitated Electrodes(IDE), humidity sensor

  • PDF ¹²⁵

  Abstract views: 138 times| Download: 125 times| https://doi.org/10.18311/jmmf/2022/32001

• Ambulance Path Clearance System With Health Monitoring Using Internet of Things

  Aishwarya Sateesh, Ankitha K S, Navyashree K N, Rakshitha B C, G N Keshava Murthy (Author)

  381-386

  Keywords:

  RF Technology, Internet of Things, Ambulance, Health Monitoring, Webpage

  • PDF ¹⁷⁴

  Abstract views: 248 times| Download: 174 times| https://doi.org/10.18311/jmmf/2022/32002

• Review on Mechanical Characteristics of Kevlar Composites

  S. Rajesh, B. Vijaya Ramnath, M. Jayasooriya, R. Ragavan (Author)

  387-394

  Keywords:

  Review, Aramid Fiber, Natural Fiber, Mechanical Characteristics

  • PDF ²¹⁵

  Abstract views: 314 times| Download: 215 times| https://doi.org/10.18311/jmmf/2022/32004

• A Thermodynamic Study of a Conventional 500 MW Coal Fired Power Plant Hybridized with Solar Energy

  Malay Kanti Naskar, Sudip Simlandi, Nilkanta Barman (Author)

  395-403

  • PDF ⁹⁴

  Abstract views: 122 times| Download: 94 times| https://doi.org/10.18311/jmmf/2022/32006

• Investigations into Effect of Cutting Conditions On Surface Roughness Under MQL Turning of AISI 4340 by ANN Models

  Prashant Prakash Powar (Author)

  404-418

  Keywords:

  MQL, ANN, Surface roughness

  • PDF ⁹³

  Abstract views: 114 times| Download: 93 times| https://doi.org/10.18311/jmmf/2022/32017

• Effect on Various Parameter of Stainless Steel 316L Weld Bead Geometry using Cold Metal Transfer (CMT) Process

  P.S. Gowthaman, M. Bhoominathan, M. Ajay Justin, G. Ajaykarthick, R. Manoj Kumar (Author)

  419-424

  Keywords:

  CMT, Stainless steel 316L, Process Parameters & Weld bead geometry

  • PDF ¹²⁰

  Abstract views: 146 times| Download: 120 times| https://doi.org/10.18311/jmmf/2022/32018

• Investigation of Mechanical Behaviour of Polypropylene Based Composite

  B. Vijaya Ramnath, Sriram K, Saravanakumar R (Author)

  425-431

  Keywords:

  Polypropylene, nylon 6,6, Injection molding, Compression strength, Impact strength

  • PDF ⁹¹

  Abstract views: 164 times| Download: 91 times| https://doi.org/10.18311/jmmf/2022/32019

• Optimal Design of Steel Planar Trusses Using Ant Lion Algorithm

  M. A. Jayaram (Author)

  432-443

  • PDF ¹⁰⁵

  Abstract views: 129 times| Download: 105 times| https://doi.org/10.18311/jmmf/2022/32021

• A Review on Understanding the Crystallization Process of Bioglass in Recent Decade

  Shakthi Prasad P, Swetha B M, Prakrathi S (Author)

  444-449

  Keywords:

  Bioglass, crystallization kinetics, Differential Scanning Calorimetry (DSC), X-Ray Diffraction Analysis (XRD), Microscopy.

  • PDF ⁸⁵

  Abstract views: 129 times| Download: 85 times| https://doi.org/10.18311/jmmf/2022/32022

• Study on Influence of Process Parameters and Insert Nose Radius on Surface Roughness in Turning Operation

  Harish N, Lokesha K, Bharath M R, P B Nagaraj, Shailesh . (Author)

  450-454

  Keywords:

  Surface roughness, Taguchi, ANOVA, process parameters, insert nose radius

  • PDF ⁹⁰

  Abstract views: 132 times| Download: 90 times| https://doi.org/10.18311/jmmf/2022/32023

• Aerodynamics Study of The Formula SAE Car using Analytical Approach

  Girish V Kulkarni, Balasubramanya H S, Nagesh B V, Yogesha Lakkegowda, Omkaresh B R (Author)

  455-461

  Keywords:

  suspension system, Aerodynamics, simulations

  • PDF ¹⁴²

  Abstract views: 210 times| Download: 142 times| https://doi.org/10.18311/jmmf/2022/32024

• Modelling, Temperature Analysis, and Mechanical Properties of Friction Stir Welding of Al-Cu Joints with Hardened OHNS Steel Tools

  Anil Raj, Pratap Kumar J, Ramesha K, Ivan Sunit Rout (Author)

  462-470

  Keywords:

  Friction Stir Welding, Solid Modelling, Hardened OHNS steel tool, welding tool pin form, temperature distribution

  • PDF ¹⁰⁶

  Abstract views: 266 times| Download: 106 times| https://doi.org/10.18311/jmmf/2022/32027

• Design and Optimization of Friction Stir Welding of Al-Cu BUTT Joint Configuration using Taguchi Method

  Pratap Kumar J, Anil Raj, Ramesha K, Ivan Sunit Rout (Author)

  471-479

  Keywords:

  Friction stir welding; Hardened OHNS steel tool; tool pin offset; Taguchi L9 orthogonal array; ANOVA

  • PDF ¹³⁰

  Abstract views: 232 times| Download: 130 times| https://doi.org/10.18311/jmmf/2022/32029