Advances in the Study of Phase Change Materials and Ne-PCMs for the Storage of Energy Applications

Jump To References Section

Authors

  • Pradnya Deshpande
     Department of Mechanical Engineering, RIT, Bangalore ,IN
  • Priyanka Gowda
     Department of Mechanical Engineering, SIT, Tumakuru ,IN
  • Jyothilakshmi R.
     Department of Mechanical Engineering, RIT, Bangalore ,IN
  • Shnmugapriya N
     Department of Mechanical Engineering, SIT, Tumakuru ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31991

Keywords:

PCM, Ne-PCM, Synthesis of PCM, Solar energy

Abstract

Phase change materials with nanoparticles that are used to store passive latent heat are proving of utmost importance to the present technology, because of their usage in wide applications right from domestic applications to space technologies. It is attracting the focus of all researchers because energy saving that to renewable energy saving such as solar energy is the biggest demand of the twenty-second century. As fossil fuel storage is getting depleted and is harming the environment, energy demand is increasing, and focusing on renewable energy storage becomes an important task in every application. The present paper focuses on various applications and recent trends of the phase change material. Later the properties of Phase Change materials are being studied. Though the PCMs are proving to be the best option as compared to other energy-saving options such as using solar concentrators, or using fins, solely using pure PCMs is not giving satisfactory results. Hence to improve the thermal properties of PCMs research is being done on the characterization of PCM through the addition of nanoparticles. This article aims at the various combinations and options of PCM and nanoparticles for different applications which give the best result.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-12-08

How to Cite

Deshpande, P., Gowda, P., R., J., & N, S. (2022). Advances in the Study of Phase Change Materials and Ne-PCMs for the Storage of Energy Applications. Journal of Mines, Metals and Fuels, 70(8A), 307–316. https://doi.org/10.18311/jmmf/2022/31991

Issue

Volume 70, Issue 8A, August 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

A.S. Abdelrazik, F. A.-S. (2022). Feasibility study for the integration of optical filtration and nanoenhanced phase change materials to the conventional PV-based solar systems. Renewable Energy, 187, 463-483. DOI: https://doi.org/10.1016/j.renene.2022.01.095

Abed Mourad, A. A. (2022). Recent advances on the applications of phase change materials for solar collectors, practical limitations, and challenges: A critical review. Journal of Energy Storage, 49. DOI: https://doi.org/10.1016/j.est.2022.104186

Ali Yousefi, W. T. (2021). Development of novel form-stable phase change material (PCM) composite using recycled explained glass for thermal energy storage in the cementitious composite. Renewable energy, 175, 14-28. DOI: https://doi.org/10.1016/j.renene.2021.04.123

Ali, H. M. (2019). Applications of combined/ hybrid use of heat pipe and phase change materials in energy storage and cooling system: A recent review. Journal of Energy Storage, 26, 1-15.

Ali, H. M. (2019). Applications of combined/ hybrid use of heat pipe and phase change materials in energy storage and cooling systems: A recent review. Journal of Energy Storage, 26, 1-15. DOI: https://doi.org/10.1016/j.est.2019.100986

Bashirpour-Bonab, H. (2021). Investigation and optimization of PCM melting with nanoparticle in a multi-tube thermal energy storage system. Case studies in Thermal Engineering, 28, 1-13. DOI: https://doi.org/10.1016/j.csite.2021.101643

C. Veerakumar, A. S. (2016). Phase change material based cold thermal energy storage: Materials, techniques and applications-A review. International journal of Refrigeration, 67, 271-289. DOI: https://doi.org/10.1016/j.ijrefrig.2015.12.005

C.J. Ho, Y.-C. L.-M. (n.d.). Forced convection heat transfer of Nano-Encapsulated Phase Change Material (NEPCM) suspension in a mini-channel heatsink. International Journal of Heat and Mass Transfer, 155, 1-13.

Charalambos N. Elias, V. N. (2019). A comprehensive review of recent advances in materials aspects of phase change materials in thermal energy storage. 2nd International Conference on Sustainable Energy and resource Use in Food Chains, ICSEF 2018, 17-19 October 2018 (pp. 385-391). Paphos, Cyprus: Elsvier Ltd.

Cyril Reuben Raj, S. S. (2020). Thermal performance of nano-enriched form-stable PCM implanted in a pin finned wall-less heat sink for thermal management application. Energy Conversion and Management, 226. DOI: https://doi.org/10.1016/j.enconman.2020.113466

F.A.Essa, A. A. (2022). Experimental enhancement of tubular solar still performance using rotating cylinder, nanoparticles’ coating, parabolic solar concentrator and phase change material. Case Studies in Thermal Engineering, 29, 1-16. DOI: https://doi.org/10.1016/j.csite.2021.101705

Farid Bahiraei, A. F.-A. (2017). Experimental and numerical investigation on the performance of carbon-based nanoenhanced phase change materials for thermal management applications. Energy Conversion and Management, 153, 115-128. DOI: https://doi.org/10.1016/j.enconman.2017.09.065

Greg Wheatley, R. I. (2021). Design improvement of a laboratory prototype for efficiency evaluation of solar thermal water heating system using phase change materials(PCMs). Results in Engineering, 1-15. DOI: https://doi.org/10.1016/j.rineng.2021.100301

Harald Mehling, M. B. (2022). PCM products and their fields of application - An overview of the state in 2020/2021. Journal of Energy storage, 51, 1-17. DOI: https://doi.org/10.1016/j.est.2022.104354

Jasim M. Mavood D. Ganji, E. C. (2019). Simultaneous energy storage and recovery in the triplex-tube heat exchanger with PCM, copper fins and Al2O3 nanoparticles. Energy Conversion and Management, 180, 99-961. DOI: https://doi.org/10.1016/j.enconman.2018.11.038

Jiaojiao Jia, B. L. (2021). Energy-saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates. Case studies in Thermal Engineering, 26, 1-12. DOI: https://doi.org/10.1016/j.csite.2021.101164

K P Venkitaraj, S. S. (2019). Effects of Al2O3, CuO, TiO nanoparticles on thermal, phase transition and crystallization properties of solid-solid phase change material. Mechanics of MAterials, 128, 64-88. DOI: https://doi.org/10.1016/j.mechmat.2018.10.004

K.P. Venkitaraj, S. S. (2018). Experimental heat transfer analysis of macro packed neopentylglycol with CuO nano additives for building cooling applications. Journal of Energy Storage, 17, 1-10. DOI: https://doi.org/10.1016/j.est.2018.02.005

K.P. Venkitaraj, S. S. (2018). Experimental study on the thermal performance of nano enhanced pentaerythrol in IC engine exhaust heat recovery application. Applied Thermal Engineering, 137, 461-474. DOI: https://doi.org/10.1016/j.applthermaleng.2018.03.062

Kaouther Ghachem, F. S. (2022). Impacts of rotating surface and area expansion during nanofluid convection on phase change dynamics for PCM packed bed installed cylinder. Alexandria Engineering Journal, 61, 4159-4173. DOI: https://doi.org/10.1016/j.aej.2021.09.034

M.J. Hosseini, M. R. (2014): Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system. Internationsl Communications in Heat and Mass Transfer, 50, 128-136. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.11.008

M. Mozafari, A. L. (2021): Thermal management of single and multiple PCMs based heat sinks for electronics cooling. Thermal science and Engineering Progress, 23. DOI: https://doi.org/10.1016/j.tsep.2021.100919

Mohammad Ghalambaz, J. Z. (2020). Conjugate solid-liquid phase change heat transfer in heatsink filled with phase change materialmetal foam. International Journal of Heat and Mass Transfer, 146, 1-18.

Mohammad Ghalambaz, J. Z. (2020): Conjugate solid-liquid phase change heat transfer in heatsink filled with phase change materialmetal foam. International Journal of Heat and Mass Transfer, 146, 1-18. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118832

Mohammad Y. Tharwan, H. M. (2022). Experimental investigation on the thermal performance of a heat sink filled with PCM. Alexandriya Engineering Journal, 61, 7045-7054.

Mohammad Y. Tharwan, H. M. (2022). Experimental investigation on the thermal performance of a het sink filled with PCM. Alexandria Engineering Journal, 61, 7045-1054. DOI: https://doi.org/10.1016/j.aej.2021.12.045

Muhammad Aqib, A. H. (2020). Experimental case studies of the effect of Al2O3 and MWCNTs nanoparticles on heating and cooling of PCM. Case Studies in Thermal Engineering, 22, 1-11. DOI: https://doi.org/10.1016/j.csite.2020.100753

Mustapha Salihi, M. E. (2022): Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco. Case Studies in Construction Materials, 16, 1-15.

Mustapha Salihi, M. E. (2022): Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco. Case studies in Construction Materials, 16, 1-15. DOI: https://doi.org/10.1016/j.cscm.2022.e00979

N. Soares, J. C. (2013): Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency. Energy and Buildings, 59, 82-103. DOI: https://doi.org/10.1016/j.enbuild.2012.12.042

Nadezhda S. Bondareva, B. B. (2018). Heat transfer inside cooling system based on phase change material with alumina nanoparticles. Applied Thermal Engineering, 144, 972- 981. DOI: https://doi.org/10.1016/j.applthermaleng.2018.09.002

Pappu Arumugam, V. R. (2022). Effective PCM, insulation, natural and/or night ventilation techniques to enhance the thermal performance of buildings located in various climates- A review. Energy and Buildings, 258, 1-25. DOI: https://doi.org/10.1016/j.enbuild.2022.111840

Paulina Rolka, T. P. (2021). The heat capacity of low-temperature phase change materials (PCM) applied in thermal energy storage systems. Renewable energy, 541-550. DOI: https://doi.org/10.1016/j.renene.2021.03.038

Qian Jin, X. L. (2022). Numerical analysis on the thermal performance of PCM- integrated thermochromic glazing systems. Energy and Buildings, 257, 1-10. DOI: https://doi.org/10.1016/j.enbuild.2021.111734

R.K. Sharma, P. V. (2015). Developments in organic solid-liquid phase change materials and their applications in thermal energy storage. Energy conversion and Management, 95, 193-228. DOI: https://doi.org/10.1016/j.enconman.2015.01.084

Raja Elarm, T. A. (2021). Numerical study of an Evacuated Tube Solar Collector incorporating a Nano-PCM as a latent heat storage system. Case studies in Thermal Engineering, 24, 1-11. DOI: https://doi.org/10.1016/j.csite.2021.100859

Salem Algarni, S. M. (2020). Experimental investigation of an evacuated tube solar collector incorporating nano-enhanced PCM as a thermal booster. Applied Thermal Engineering, 180, 1-10. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115831

Selva Prabhu, V. G. (2018). Nano Enhanced Phase Change Material for Thermal Energy Storage Application. International Research Journal of Engineering and Technology (IRJET), 05(03), 564-571.

Shu-Bo Chen, S. S.-F. (2021). Combined effect of using porous media and media and nanoparticle on melting performance of PCM filled enclosure with triangular doubled fins. Case studies in Thermal Engineering, 25, 1-15. DOI: https://doi.org/10.1016/j.csite.2021.100939

Soni, V. (2021). Nano additive Particle segregation and mobility in phase change materials. International journal of Heat and Mass Transfer, 165, 1-15. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120676

Soroush Ebadi, S. H. (2018). Geometry and nanoparticle loading effects on the bio- based nano-PCM filled cylindrical thermal energy storage system. Applied thermal Engineering, 141, 727-740. DOI: https://doi.org/10.1016/j.applthermaleng.2018.05.091

Swati Agarwala, K. N. (2022). Review of thermal characterization techniques for salt- based phase change materials. Journal of Energy Storage, 46, 1-19. DOI: https://doi.org/10.1016/j.est.2021.103865

XianghaiXing, W. L. (2022). Ternary composite phase change materials (PCMs) towards low phase separation and supercooling: eutectic behaviours and application. Energy Reports, 8, 2646-2655. DOI: https://doi.org/10.1016/j.egyr.2021.12.069

Xiaonan Wang, W. L. (2022). A critical review on phase change materials (PCM) fpr sustainable and energy efficient building: Design, characteristic, performance and application. Energy and buildings, 260, 1-25. DOI: https://doi.org/10.1016/j.enbuild.2022.111923

Xiyao Zhang, J. N.-Y. (2019). Development and characterization of novel and stable silicon nanoparticles-embeded PCM-in-water emulsions for thermal energy storage. Applied Energy, 238, 1407-1416. DOI: https://doi.org/10.1016/j.apenergy.2019.01.159

Zeyed Amin Al-Absi, M. I.-S. (2022). Properties of PCM-based composites developed for the exterior finishes of building walls. Case studies in Construction Materials, 16, 1-15. DOI: https://doi.org/10.1016/j.cscm.2022.e00960