Influence of CNT Particle on Mechanical Properties Of Epoxy Composites

Jump To References Section

Authors

  • T. Malyadri
     Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Hyderabad - 500085, Telangana ,IN
  • J. Suresh Kumar
     Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Hyderabad - 500085, Telangana ,IN
  • M. Nagamadhu
     Department of Mechanical Engineering, BMS Institute of Technology and Management, Bangalore - 560064 ,IN

DOI:

https://doi.org/10.18311/jmmf/2023/36254

Keywords:

Carbon Nanotube, Epoxy Composites, Magnetic Stirring, Mechanical Property, Mines

Abstract

In the recent years very much rapid development in the field of nanotechnology in many applications like structural, medical, biotechnology, agriculture etc. Polymers and polymer based composites attain a vital role in structural applications due to its light weight, easy of handling etc. However, during processing of polymer few problems associated with crosslinking of polymer bonds. These problems are overtaking by reinforcing Nano particles to the polymers. This research work focusses on studying the mechanical properties of epoxy polymer composites by reinforcing various weight percentage of Carbon Nanotube (CNT). The epoxy composite is prepared by magnetic stirring, mechanical stirring using hand layup method followed by post curing. The one-way ANOVA used to study the descriptive statistics influence of CNT reinforcement from 0.2 to 0.8 weight percentage in a 0.2 intervals. Further, Scheffe multiple comparison, Turkey HSD and Holm and Bonferroni multiple comparison tests are used to study the significant effect between the reinforcing percentage. It was observed that adding CNT to the composites improves the tensile strength and it is also observed from F and P values that reinforcement statically significant.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-11-30

How to Cite

Malyadri, T., Suresh Kumar, J., & Nagamadhu, M. (2023). Influence of CNT Particle on Mechanical Properties Of Epoxy Composites. Journal of Mines, Metals and Fuels, 71(11), 2229–2236. https://doi.org/10.18311/jmmf/2023/36254

Issue

Volume 71, Issue 11, November 2023

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

Sreehari H, Gopika V, Jayan JS, Sethulekshmi AS, Saritha A. A comprehensive review on bio epoxy based IPN: Synthesis, properties and applications. Polymer, 2022; 252:124950. DOI: 10.1016/j.polymer.2022.124950 DOI: https://doi.org/10.1016/j.polymer.2022.124950

Rajawat AS, Singh S, Gangil B, Ranakoti L, Sharma S, Asyraf MRM, Razman MRR. Effect of Marble Dust on the Mechanical, Morphological, and Wear Performance of Basalt Fibre-Reinforced Epoxy Composites for Structural Applications. Polymers, 2022; 14(7):1325. DOI: 10.3390/polym14071325 DOI: https://doi.org/10.3390/polym14071325

Quelennec B, Delpouve N, Delbreilh L, Delannoy R, Richaud E. Physical Aging of an Epoxy Resin for Civil Engineering Applications from Fast Scanning Calorimetry Investigations. Macromolecular Symposia. 2022; 405(1):2100230. DOI: 10.1002/masy.202100230 DOI: https://doi.org/10.1002/masy.202100230

Rathi A, Kundalwal SI, 2022. Synergistic effect of ultrasonically assisted exfoliated MWCNTs by ZrO2 nanoparticles on thermo-mechanical and anti-corrosive properties of epoxy nanocomposites. Journal of Composite Materials, 56(11). DOI: 10.1177/00219983221084770 DOI: https://doi.org/10.1177/00219983221084770

Zhou S, Li J, Kang S, Zhang D, 2022. Effect of Carbonized Ramosissima Nanoparticles on Mechanical Properties of Bamboo Fiber/Epoxy Composites. Journal of Natural Fibers, 2022; 19(4):1239-1248. DOI: DOI: https://doi.org/10.1080/15440478.2020.1764448

1080/15440478.2020.1764448

Stavropoulos SG, Sanida A, Psarras GC, Assessing the Effect of Fe3O4 Nanoparticles on the Thermomechanical Performance of Different Forms of Carbon Allotropes/ Epoxy Hybrid Nanocomposites. Applied Mechanics, 2022; 3(2):560-572. DOI: 10.3390/applmech3020033 DOI: https://doi.org/10.3390/applmech3020033

Ozeiry F, Ramezanzadeh M, Ramezanzadeh B, Bahlakeh G, Multi-walled CNT decoration by ZIF-8 nanoparticles: O-MWCNT@ZIF-8/epoxy interfacial, thermal–mechanical properties analysis via combined DFT-D computational/experimental approaches. Journal of Industrial and Engineering Chemistry, 2022; 108:170- 187. DOI: 10.1016/j.jiec.2021.12.037 DOI: https://doi.org/10.1016/j.jiec.2021.12.037

Darıcık F, Topcu A, Aydın K, Çelik S. Carbon nanotube (CNT) modified carbon fiber/epoxy composite plates for the PEM fuel cell bipolar plate application. International Journal of Hydrogen Energy. 2022. DOI: 10.1016/j. ijhydene.2022.09.297

Kurien RA, Selvaraj DP, Sekar M, Koshy CP, Praveen KM, Comparative mechanical, tribological and morphological properties of epoxy resin composites reinforced with multi-walled carbon nanotubes. Arab J Sci Eng. 2022; 47:8059–8067. DOI: 10.1007/s13369-021-05984-y DOI: https://doi.org/10.1007/s13369-021-05984-y

Seraji AA, Aghvami-Panah M, Zadhoush A, Salimian S, Khoshnevis H. Microstructural design and mechanical performance of epoxy/carbon nanotube fiber composite. Journal of Composite Materials. 2022; 56(23). DOI: 10.1177/002199832211192 DOI: https://doi.org/10.1177/00219983221119273

Shariff M, Nagamadhu M, Jaiprakash M, Karthikeyan K, Kiran, Effect of drilling process parameters on natural fiber reinforced basket epoxy composites using grey relational analysis. Materials Today Proceedings, 2020; 24(4):2255-2264. DOI: 10.1016/j.matpr.2020.03.753 DOI: https://doi.org/10.1016/j.matpr.2020.03.753

Jaiprakash M, Nagamadhu M, Karthikeyan K, Kiran, Shariff M, Mohan Kumar GC, Effect of drilling parameters on Neem wood veneer epoxy composites using grey relational analysis. Materials Today Proceedings. 2020; 24(4):2163-2173. DOI: 10.1016/j.matpr.2020.03.674 DOI: https://doi.org/10.1016/j.matpr.2020.03.674

Nagamadhu M, Jeyaraj P, Mohan Kumar GC, Influence of textile properties on dynamic mechanical behavior of epoxy composite reinforced with woven sisal fabrics. Sadhana, 2020; 45:14. DOI: 10.1007/s12046-019-1249-z DOI: https://doi.org/10.1007/s12046-019-1249-z

Karthikeyan K, Nagamadhu M, Jaiprakash M, Kiran, Shariff M. Effect of drilling parameters on natural fiber reinforced with chaired epoxy poly urethane foam com- posites using grey relational analysis. Materials Today Proceedings. 2020; 24(4):2193-2203. DOI: 10.1016/j. matpr.2020.03.677 DOI: https://doi.org/10.1016/j.matpr.2020.03.677

Mahadevappa N, Shankar VK, Sehgal S, Upadhya R. Study the impact of drilling process parameters on natural fiber reinforced herringbone epoxy composites. 44(5):339-345. DOI: 10.18280/acsm.440506 DOI: https://doi.org/10.18280/acsm.440506

Kiran, Nagamadhu M, Jaiprakash M, Karthikeyan K, Shariff M. Study the impact of drilling process parameters on natural fiber reinforced chaired epoxy composites. Materials Today Proceedings. 2020; 24(4):2204-2218. DOI: 10.1016/j.matpr.2020.03.678 DOI: https://doi.org/10.1016/j.matpr.2020.03.678

Vinay A, Malyadri T, Raj LS, Mechanical Characterisation of Nano Hybrid Composites. In: Dave HK, Dixit US, Nedelcu D (eds) Recent Advances in Manufacturing Processes and Systems. Lecture Notes in Mechanical Engineering, Springer, Singapore. 2022. DOI: 10.1007/978-981-16-7787-8_50 DOI: https://doi.org/10.1007/978-981-16-7787-8_50

Malyadri T, Suresh Kumar J. Dynamic mechanical anal- ysis of carbon nanotube reinforced epoxy composites for nano hybrid structures. DOI: 10.31838/ecb/2023.12.5.45 72023.13/06/2023

Malyadri T, Suresh Kumar J. Dynamic mechanical analysis of graphene nanoparticles reinforced epoxy composites for nano hybrid structures. DOI: 10.48047/ ecb/2023.12.4.2322023.21/05/2023

An Ample survey on Characterization and Analysis on Nano-Hybrid Composite Structures, International Journal of Emerging Technologies and Innovative Research. July 2021. 8(7):1-10.