Volume 71, Issue 11, November 2023
Published:
2024-01-25
Articles
-
Applicability of the Teetered Bed Separator for Beneficiating Indian Iron Ore Fines: An Experimental Study
Keywords:
Beneficiation, Iron Ore Fines, Partition Coefficient, Separation Efficiency, Teetered Bed Separator -
Experimental Analysis of Gasoline-Ethanol-Methanol Blend at Various Conditions in Engine
Keywords:
Blend, Emission, Ethanol, Methanol, Performance, SI Engine -
Analysis and Optimization of Process Parameters of Powder Mixed Near Dry- EDM by using Grey Relational Optimization
Keywords:
Dry Air, EDM, Metallic Powder, MRR, Residual Stress, Surface Finish -
Effect of Horizontal Tube Position on Wall-to-Bed Heat Transfer in Air-Solid Fluidized Bed of Large Particles
Keywords:
Fluidized Bed Heat Transfer, Large Particles, Tube Position -
Bio-sourced Hydroxyapatite is better bioactive than its synthetic grade: A comparative assessment of Ti and Zn doped Hydroxyapatite derived from Bio and synthetic sources
Keywords:
Eggshell Waste, SBF, SEM, XRD -
Optimization of Dry Beneficiation Process for Lignite Using Advanced RAMDARS System with VFD, IoT, and Vibrating Crusher: A Case Study
Keywords:
Coal Beneficiation, IoT, Pyrite Removal, RAMDARS Technology, Variable Frequency Drives -
Classification and Regression-based Machine Learning Approach to Predict Mine Water Quality Index
Keywords:
Data Mining, Decision Trees Classification, Mine Water Quality Management, Predictive Modelling, Regression Analysis, Water Quality Index Prediction -
A Study to Determine Optimum Speed to Produce the High-Quality Castings for Al-17%Si Alloy in a Vertical Centrifugal Casting Machine
Keywords:
Centrifugal Casting, Fractography, Metal Flow, SEM, Wear Characteristics -
Investigation of Mechanical and Wear Behaviour of Al5056-Carbon Nanotube -Graphene Hybrid MMCs using Powder Metallurgy Route
Keywords:
Al5056-Alloy, CNT, Gr, Hardness, Microstructure, Tensile, Wear -
Application of Metal Oxide in Litho-Vanadium Glasses Containing Non-Magnetic Metal Ions: Physical and Optical Properties Analysis
Keywords:
Basicity, Lithium, Metal Oxide, Refractive Index -
Response Surface Methodology-based Optimization of Variable Compression Ratio Diesel Engine Characteristics with Jatropha Biodiesel
Keywords:
Engine Performance, Exhaust Emissions, Jatropha Biodiesel, Optimization, Response Surface Method, Variable Compression Ratio -
An Analytical Review on Comparative Analysis of Ground Improvement Using Various Admixtures
Keywords:
Bearing Capacity, Bentonite, Bitumen, Ground Improvement, Kaolinite, Rice Husk Ash -
A Comprehensive Study on the Effects of Surface Roughness on Power Consumption and Heat Transfer Performance in Novel In-Tube Condensation r123yf Refrigerant Systems
Keywords:
Condensation Heat Transfer, Optimal Surface Roughness, Power Consumption, R123yf Refrigerant, Surface Roughness -
Tool Rotational and Tool Travel Parameters Influence On Friction Stir Welded Dissimilar Joints Properties
Keywords:
Fractography, FSW, Dissimilar Welding, XRD -
Synthesis, Mechanical Properties and Thermal Stability Of Polydimethylsiloxane Nanocomposites
Keywords:
Mechanical Properties, Nanocomposites, Nano-graphite, Polydimethylsiloxane, Thermal Properties -
Multilayer Perceptron Artificial Neural Network (Mlpann) Model to Predict Temperature During Rotary Drilling
Keywords:
Interface Temperature, MLPANN, Transfer Function -
Characterization of Polymer Composite Reinforced With Desmostachya Bipinnata Natural Fibers of 600 Micron Size
Keywords:
Desmostachya bipinnata, Electromagnetic Shielding, Tensile -
Application and Challenges of Machine Learning Techniques in Mining Engineering and Material Science
Keywords:
AI, Data Science, Engineering, Machine Learning, Material Science, Mining -
The Development of Ackerman Steering System For 1/10th Scale Autonomous Mining Shuttle Design
Keywords:
1/10th Scale Prototype, Ackermann Steering, Autonomous Mining Shuttle, PID Algorithm, STM 32 Microcontroller, Turning Stability -
An Extensive Study and Evaluation of Tribological Properties of Fsw Plates Using Linear Reciprocating Tribometer (LRT)
Abstract views: 105 times| Download: 67 times| https://doi.org/10.18311/jmmf/2023/36054 -
Bending, Tensile and Water Absoption Test of Corn Husk and Glass Fibre Reinforced Composite For Different Composition
Keywords:
Bending Test, Corn Husk, Glass Fibre, Hand Lay-Up, Natural Composites, Tensile Test, Water Absorption Test -
Experimental Investigations and Quasi Dimensional Modelling of Spark Ignition Engine Fuelled With Gasoline and Oxyhydrogen Gas Mixture
Keywords:
Dry Cell, Electrolysis, Emission, Oxy-Hydrogen, Performance, Phenomenological, Quasi -
A Preparation and Performance Investigation of Al2O3, TiO2 and Gr Nanoparticles Dispersed Waste Fish Oil (WFO) Biodiesel
Keywords:
Biodiesel, Esterification, Waste Fish Oil -
Microstructure-Based Finite Element Analysis Of Composites
Abstract views: 74 times| Download: 74 times| https://doi.org/10.18311/jmmf/2023/36101 -
A Review on Compression-Ignition Engine Performance And Emissions With Hydrogen-Diesel Mixtures: Effect Of Operational Parameters
Keywords:
Compression-ignition, Hydrogen / Diesel Engine, Performance of Emission -
Metallic Sensor: Architecture, Protocols, and Functions Of Wireless Network
Keywords:
Ecological, Metallic Sensor, Military, Power, Systems, Wireless -
Experimental Investigation of Welding Parameters On Mild Steel Using Metal Active Gas Welding
Keywords:
Manufacturing, Metal Active Gas, Shielded Welding, Welding Current -
Phytotoxicity Study of Biogenic Mono-Metallic and Bi- Metallic (Au-Ag) Alloy Nps
Keywords:
Bimetallic, Germination and Seedling Growth, Gold-Silver Nanoparticles, Monometallic, Phytotoxicity Study -
Experimental Investigation on Fracture Toughness Of Hydrogen Embrittled Cu-Al-Be Shape Memory Alloy
Keywords:
Cu-Al-Be, Fracture Toughness, Hydrogen Embrittlement, KIC, Shape Memory Alloy, Shape Memory Effect -
Mineral-Associated Medicinal Plants: Uncovering Their Anti-inflammatory Potential Through Comprehensive Exploration of Bioactive Compounds And Pharmacological Activities
Keywords:
Anti-inflammatory, Bioactive Compounds, Defense Mechanism, Mineral-associated Plants, Natural Remedies, Phytochemicals -
Comparative Study of Wear Behaviour of Heat Treated 304 Austenitic and 410 Martensitic Stainless Steel
Keywords:
Friction and Wear, Heat Treatment, Micro Hardness, Tribology, Stainless Steel 304, 410 -
Experimental Investigation of Red Soil Blended With Bentonite and Lime as a Landfill Liner
Keywords:
Bentonite, Compressibility, Hydraulic Conductivity, Landfill, Red Soil -
Study of Correlation of Arsenic in Fish Flesh And Occurrence of Oral Carcinoma in Effected Areas Of West Bengal
Keywords:
Arsenic, Correlation, Fish Flesh, Metal, Occurrence, Oral Cancer, West Bengal -
Enhancing Heat Transfer Efficiency: A Numerical Investigation of Shell and Tube Heat Exchanger With Variable Angular Baffles for Minimizing Overall Fuel Consumption
Keywords:
k - ɛ Turbulence Model, Numerical Study, Optimization in Fuel Consumption, Segmental Baffle, Shell and Tube Heat Exchanger -
Numerical Simulation of Casson Micropolar Fluid Flow Over an Inclined Surface Through Porous Medium
Keywords:
Chemical Reaction, Micro Polar, Nano Fluid, Numerical Analysis, Porous Medium -
Metallurgical Behavior and Biocompatibility of Boron Trioxide on the Bioactive Glasses
Keywords:
Bioactive Glass, Boron Trioxide, Biocompatibility, Flexural Strength, Microhardness -
Design and Evaluation of Perforated Fins With Different Array of Fins Structure by an Active Mode of The Cooling System
Keywords:
Aluminium AL-1060, Heat Transfer, Perforated fins, Reynolds number -
Numerical Analysis of Vertical Axis Wind Turbine With Different Profiles
Keywords:
Computational fluid Dynamics (CFD), Fuel, Low Wind Velocity Terrains, Vertical Axis Wind turbine, Turbine Design -
Development and Study on Brick Composites
Keywords:
Brick Composite, Ceramic Matrix, Density, Hardness, Porosity, Powder Metallurgy, Surface Morphology -
Aluminum Oxide (Al2O3) Nanoparticles as Thermal Enhancers in Phase Change Materials for Electronic Devices
Keywords:
Aluminum Oxide, Phase Change Material, Nano Particles, Nano-Phase Change Material -
Hydrodynamic Analysis of NACA 4415 Hydrofoil For Marine Applications
Keywords:
CFD, Flow Separation, Hydrofoil, Kort-Nozzle, Marine Application, NACA4415 -
Influence of Temperature on the Stability and Optical Characteristics of Tga Capped Zns Quantum Dots For Utilization in Blue Light Emission
Keywords:
Opto Electronic Device ZnS Quantum Dots, Quantum Confinement, Thioglycolic Acid, Urbach Energy -
Facile Synthesis of Spinel Zinc Aluminate Using Biofuel For Effective Photocatalytic Dye Degradation And Electrochemical Sensor Studies
Keywords:
Photocatalysis, Sensors, ZnAl2O4 -
Influence of CNT Particle on Mechanical Properties Of Epoxy Composites
Keywords:
Carbon Nanotube, Epoxy Composites, Magnetic Stirring, Mechanical Property, Mines -
Metallurgical Microstructure Evolution of Friction Drilling With AL6061-T6 at Various Regions of Bushing Formation
Keywords:
Friction Stir Drilling, Microstructure, Mining Industry, Optical Microscope, Thermal Forces -
Synthesis of Graphene Based Graphitic Carbon Nitride Hybrid Nanocomposite Photocatalysts for Hydrogen Generation: A Mini Review
Keywords:
Graphitic Carbon Nitride, H2 Generation, Reduced Graphene Oxide, Visible Light Photocatalyst, Water Splitting -
Design and Development of Iot Based Apparatus For Measuring Thermal Conductivity of Insulating Slabs
Keywords:
Electrical Conductivity, Insulators, Thermal Conductivity, Protection, Apparatus, Iot, Metals, Mining -
Couple Stress Fluid Flow Through a Porous Media Past A Solid Sphere
Keywords:
Continuity Equation, Couple Stress Parameter, Porosity -
Three-Dimensional Boundary-Layer Flow Across A Wedge: A Numerical Investigation
Keywords:
Boundary-layer, Keller-box, Numerical Simulation, Similar Solution, Three-dimensional -
A Study on Heat and Flow of Viscoelastic Dielectric Liquid Over an Inclined Stretching Sheet
Keywords:
Angle of Inclination, Dielectric liquid, Stretching Sheet. -
Analysis of Forchheimer Effect for Double Diffusive Convection With Dusty Fluids and MHD
Keywords:
Dust Particles, Forchheimer, Mixed Convection, MHD, Variable Fluid Properties -
Evaluation of Ground Water Quality in Yeliyur Grama Panchayath Villages, Kunigal Taluk
Keywords:
Ground Water, Panchayath, Tube Well -
Dielectric Properties of Aluminium and Silver Doped Zinc Oxide Nano Powder Prepared by Solution Combustion Synthesis
Keywords:
Dielectric Constant, Dielectric Loss, Zinc Oxide -
Synthesis and Characterization of Reduced Graphene Oxide Fabricated Over Ruthenium Oxide Through Reflux Method
Keywords:
Characterization, rGO, Reflux Method, rGO/RuO2 -
Study on Nanofluid Boundary Layer Flow Over A Stretching Surface by Spectral Collocation Method
Keywords:
Brownian Motion, Fluid Velocity, Heat Transfer Rate, Nano Fluid, Thermophoresis -
A Nanofluid Boundary Layer Flow Over a Stretching Body in the Presence of Porous Medium
Keywords:
Brownian Motion Parameter, Permeability Parameter, Porous Media, Spectral Collocation Method, Stretching Sheet, Thermophoresis Parameter -
Development of Fe (Iii) Sensor System Using Carbon Nanodots Derived From Plectranthus amboinicus
Abstract views: 76 times| Download: 56 times| https://doi.org/10.18311/jmmf/2023/36260 -
Investigation of Dhokra Casting in Light of Modern Engineering Technique
Keywords:
Dhokra Casting, Gating Calculation, Quality Analysis, Tribal Rural Casting -
Feasibility Study for the Development of Small Scale Low Speed Wind Tunnel for Supermileage Prototype Car
Keywords:
Contraction, Diffuser, Test Section, Settling Chamber, Wind Tunnel -
PLC Controlled Assembly Automation for Spot Welding Work Station
Keywords:
Automated Assembly Line, PLC Controller, Spot Welding. -
Efficient ELM Model With Parameter Optimization Using Pso Algorithms in the Prediction of Combustion Pressure Parameters of Dsi Engine Using Ethanol- Gasoline Blends
Keywords:
ANN, ELM, PSO-ELM, TSI -
Performance Evaluation of the Manufacturing Process For the Proposed Design Modification of the Kingpin
Keywords:
Lean Manufacturing, Measuring System Analysis (MSA), Metal, Process Flow Diagram (PFD), SPC