Volume 70, Issue 3A, March 2022

Articles

• Arduino Based Automatic Irrigation Control System By Utilizing Moisture Content

  S. B. Arun, K. B. Nandan, P. Harsha Vardhan, T. M. Rajath (Author)

  1-4

  Keywords:

  Arduino based automatic irrigation control system, global worming, famine, drought, moisture sensor, GHG.

  • PDF ¹⁸⁸

  Abstract views: 456 times| Download: 188 times| https://doi.org/10.18311/jmmf/2022/30659

• Taguchi Assessment On The Effects Of Heat Treatment Variable On The Hardness And Tensile Strength Of Silicon Carbide Reinforced A357 Hybrid Composites

  K. Yathiraj, G. J. Naveen, M. H. Annaiah (Author)

  5-9

  Keywords:

  Taguchi assessment, sustaining temperature, reinforcement, composite material, mechanical statistics, systematic examination, signal-to-noise ratios.

  • PDF ⁷⁰

  Abstract views: 92 times| Download: 70 times| https://doi.org/10.18311/jmmf/2022/30660

• Taguchi Predictions On Wear And Heat Treatment Of A357 Based Hybrid Metal Matrix Composites

  K. Yathiraj, G. J. Naveen, M. H. Annaiah (Author)

  10-14

  Keywords:

  Hybrid metal matrix composite, heat treatment parameter, wear factor, taguchi, ANOVA, signalto- noise ratio.

  • PDF ⁸⁷

  Abstract views: 146 times| Download: 87 times| https://doi.org/10.18311/jmmf/2022/30661

• Effect Of Gap Ratio On Flow Influenced Actions Of Two Circular Cylinders In Side-By-Side Arrangement

  Sudip Chakraborty, Saikat Chaterjee, Ranjan Kumar (Author)

  15-20

  Keywords:

  Flow induced vibration, CFD, gap ratio, FEM, fluid-structure interface.

  • PDF ¹⁰⁶

  Abstract views: 158 times| Download: 106 times| https://doi.org/10.18311/jmmf/2022/30662

• An Artificial Intelligent Prediction Model For Evaluating The Engine Performance And Emission Characteristics Using Waste Cooking Oil Biodiesel Blends

  Venkata Ramesh Mamilla, S. Bhagavan Sreedhar, Padilam Rama Krishna (Author)

  21-27

  Keywords:

  ANN, performance, diesel engine, exhaust emission, waste cooking oil methyl ester.

  • PDF ⁹⁷

  Abstract views: 108 times| Download: 97 times| https://doi.org/10.18311/jmmf/2022/30663

• Ferroconvection In A Sparsely Distributed Porous Medium With Time-Dependent Sinusoidal Magnetic Field

  C. Balaji, C. Rudresha, V. Vidya Shree, S. Maruthamanikandan (Author)

  28-34

  Keywords:

  Ferromagnetic fluid, magnetic field modulation, perturbation method, stability, porous medium.

  • PDF ¹³²

  Abstract views: 133 times| Download: 132 times| https://doi.org/10.18311/jmmf/2022/30664

• Effect Of Electric Field Modulation On Electroconvection In A Dielectric Fluid-Saturated Porous Medium

  C. Rudresha, C. Balaji, V. Vidya Shree, S. Maruthamanikandan (Author)

  35-41

  Keywords:

  Convection, Darcy-Brinkman model, dielectric fluid, electric field, modulation.

  • PDF ¹²⁰

  Abstract views: 152 times| Download: 120 times| https://doi.org/10.18311/jmmf/2022/30665

• Experimental Investigations of Vibration Characteristics of Jute Fibre Polymer Composites

  A. B. Vinayaka Patil, Prashanth Banakar, K. Lokesha (Author)

  42-45

  Keywords:

  Natural fibre reinforced polymer, jute, damping factor, polyester resin, maleic anhydride.

  • PDF ¹⁰⁰

  Abstract views: 196 times| Download: 100 times| https://doi.org/10.18311/jmmf/2022/30666

• Optimization Of Machining Parameters In Machining Nimonic C-263 By WEDM Process

  K. Satish, V. R. Srinivasan, C. P. S. Prakash (Author)

  46-51

  Keywords:

  Nimonic C-263, WEDM, MINITAB, ANOVA, SN ratios.

  • PDF ¹⁰⁹

  Abstract views: 161 times| Download: 109 times| https://doi.org/10.18311/jmmf/2022/30667

• A Comparative Study On Sliding Wear Behaviour Of Post-Cured Hybrid Reinforced Polymer Composites

  Vithal Rao Chavan, Veerabhadrappa Algur, K. Veeresh, K. R. Dinesh (Author)

  52-56

  Keywords:

  Post-curing, GFRP, wear loss, surface roughness, pin-on-disc testing machine.

  • PDF ⁷⁰

  Abstract views: 71 times| Download: 70 times| https://doi.org/10.18311/jmmf/2022/30668

• Wear Behaviour Of Modified ZA-27 Alloy: A Statistical Analysis

  Poornima Hulipalled, Veerabhadrappa Algur, V. Lokesha, S. Naveen (Author)

  57-60

  Keywords:

  ANOVA, mixed design, orthogonal array, pinon- disc testing machine, wear loss.

  • PDF ⁷⁸

  Abstract views: 126 times| Download: 78 times| https://doi.org/10.18311/jmmf/2022/30669

• Investigation Of Mode II Interlaminar Fracture Toughness Of Silicon-Di-Oxide Filled Glass Fiber Reinforced Epoxy Composites

  B. K. Sriranga, L. J. Kirthan, Arun A. Magadum, Vishwanath Patil (Author)

  61-67

  Keywords:

  Interlaminar fracture toughness, shear precrack, mode II test method, mode II crack growth.

  • PDF ⁸⁴

  Abstract views: 120 times| Download: 84 times| https://doi.org/10.18311/jmmf/2022/30670

• Ferroconvection In A Horizontal Darcy-Brinkman Porous Medium With Radiative Transfer

  Soya Mathew, Nisha Mary Thomas, S. Maruthamanikandan (Author)

  68-77

  Keywords:

  Ferrofluid, thermal radiation, porous media, magnetic field.

  • PDF ⁷⁵

  Abstract views: 88 times| Download: 75 times| https://doi.org/10.18311/jmmf/2022/30671

• Effect of Time-Dependent Sinusoidal Boundary Temperatures on the Onset Of Ferroconvection in a Porous Medium

  Nisha Mary Thomas, Soya Mathew, S. Maruthamanikandan (Author)

  78-83

  Keywords:

  Ferrofluid, porous media, magnetic field, temperature modulation.

  • PDF ⁸⁵

  Abstract views: 124 times| Download: 85 times| https://doi.org/10.18311/jmmf/2022/30672

• Application Of High Velocity Oxy-Fuel Technique To Combat Surface Degradation In Power Generation Industry – A Review

  Deepak Dhand, Jasmaninder Singh Grewal, Parlad Kumar (Author)

  84-91

  Keywords:

  Corrosion, wear, HVOF, steel, surface, thermal spray, etc.

  • PDF ⁸³

  Abstract views: 59 times| Download: 83 times| https://doi.org/10.18311/jmmf/2022/30673

• Optimization of AL₂O₃ Concentration In Water Based Nano Fluid To Enhance The Heat Transfer For Solar Application

  Kusammanavar Basavaraj, K. Elangovan, S. Shankar (Author)

  92-97

  Keywords:

  Nano-fluid, heat transfer, nussellt number, CFD, solar application.

  • PDF ⁹¹

  Abstract views: 130 times| Download: 91 times| https://doi.org/10.18311/jmmf/2022/30674

• Effect Of MFD Viscosity On Ferroconvection In A Fluid Saturated Porous Medium With Variable Gravity

  V. Vidya Shree, C. Rudresha, C. Balaji, S. Maruthamanikandan (Author)

  98-103

  Keywords:

  Ferrofluid, MFD viscosity, porous media, magnetic field, variable gravity.

  • PDF ¹⁰⁴

  Abstract views: 128 times| Download: 104 times| https://doi.org/10.18311/jmmf/2022/30675

• Bearing Fault Classification Using Statistical Features And Machine Learning Approach

  G. Manjunatha, H. C. Chittappa (Author)

  104-107

  Keywords:

  Bearing fault, diagnosis, ANN, classifiers, statistical features.

  • PDF ⁷⁴

  Abstract views: 70 times| Download: 74 times| https://doi.org/10.18311/jmmf/2022/30687

• Effect Of Tool Pin Profiles On Surface Roughness Of Friction Stir Welded 2050-T84 Al-Cu-Li Alloys

  Sanjeev Kumar, Durjyodhan Sethi, Smrity Choudhury, Rahul Das, Subhash Chandra Saha, Barnik Saha Roy (Author)

  108-113

  Keywords:

  2050-T84Al-Cu-Li alloy, friction stir welding, tool pin profile, surface roughness, tensile properties.

  • PDF ²⁷⁰

  Abstract views: 115 times| Download: 270 times| https://doi.org/10.18311/jmmf/2022/30677

• Study On Partial Replacement Of E-Plastic Waste As Coarse Aggregates

  M. Roopa, Sriraksha R. Das, M. Sanjana, B. S. Thungashree (Author)

  114-119

  Keywords:

  Solid waste, workable concrete, less dense concrete, efficient disposal.

  • PDF ⁹⁷

  Abstract views: 150 times| Download: 97 times| https://doi.org/10.18311/jmmf/2022/30678

• Dynamic Behaviour Of Geodesic Dome Structure For Different Time Histories

  M. Roopa, V. Priyanka, H. Venugopal (Author)

  120-123

  Keywords:

  Time histories, geodesic dome, FEA, dynamic analysis.

  • PDF ¹³²

  Abstract views: 100 times| Download: 132 times| https://doi.org/10.18311/jmmf/2022/30679

• Sensitivity Variation Of A Flowmeter With Varying Shapes Of The Target

  K. L. Kumaraswamy, T. Krishna Rao (Author)

  124-126

  Keywords:

  Flow rate, tensor flow, coefficient of discharge, target flow.

  • PDF ⁶⁵

  Abstract views: 103 times| Download: 65 times| https://doi.org/10.18311/jmmf/2022/30680

• An Overview Of Direct Metal Laser Sintering (DMLS) Technology For Metal 3D Printing

  Prashant S. Humnabad, R. Tarun, Indraneel Das (Author)

  127-133

  Keywords:

  Additive manufacturing, direct metal laser sintering, metal 3D printing.

  • PDF ⁴¹²

  Abstract views: 217 times| Download: 412 times| https://doi.org/10.18311/jmmf/2022/30681

• Optimal Design Of Smart Grid Renewable Energy System Using Homer Programme

  C. Siddaraju, S. Deepak, H. S. Balasubramanya (Author)

  134-137

  Keywords:

  Homer software, smart grids, india, renewable resources, energy access, optimization model.

  • PDF ¹⁷⁰

  Abstract views: 129 times| Download: 170 times| https://doi.org/10.18311/jmmf/2022/30682

• Microstructural Characterization, Mechanical And Wear Behaviour Of Al2024-B4C Composites For Aerospace Applications

  V. N. Akanksh, Pranav Hegde, S. Siddharth, A. B. Manjunath, C. Siddaraju, Madeva Nagaral (Author)

  138-142

  Keywords:

  Microstructure, mechanical and wear behaviour, composite technology, AL2024–B4C

  • PDF ¹¹³

  Abstract views: 233 times| Download: 113 times| https://doi.org/10.18311/jmmf/2022/30683

• Fatigue Studies On Aluminum 6061/SiC Reinforcement Metal Matrix Composites

  Prashant S. Humnabad, M. B. Hanamantraygouda, S. B. Halesh (Author)

  143-147

  Keywords:

  Fatigue, forging, wohler curves, silicon carbide, reinforcement.

  • PDF ¹¹¹

  Abstract views: 196 times| Download: 111 times| https://doi.org/10.18311/jmmf/2022/30684

• An Experimental Investigation Of Central Injection Based Hydrogen Dual Fuel Spark Ignition Engine

  Pavan J. Gowdal, R. Rakshith, S. Akhilesh, Manjunath ., Ananth S. Iyengar (Author)

  148-152

  Keywords:

  Spark ignition engine, hydrogen central injection, brake thermal efficiency, brake specific fuel consumption.

  • PDF ⁸⁴

  Abstract views: 205 times| Download: 84 times| https://doi.org/10.18311/jmmf/2022/30685

• Effect Of Climatic Conditions On Performance Of ORC Using Environment-Friendly Working Fluids – Special Reference To India

  Ananth S. Iyengar, Pritam Bhat, Pavan Kumar Reddy, B. S. Dayananda, N. Abhilash (Author)

  153-157

  Keywords:

  Organic rankine cycle, organic working fluid, condenser performance, heat transfer rate.

  • PDF ⁷¹

  Abstract views: 72 times| Download: 71 times| https://doi.org/10.18311/jmmf/2022/30686