Performance of Solar Collector Using Recycled Aluminum Cans for Drying

Jump To References Section

Authors

  • Anant Sidhappa Kurhade
     Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune - 411018, Maharashtra ,IN
  • Shital Yashwant Waware
     Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune - 411018, Maharashtra ,IN
  • Kashinath Haribhau Munde
     Department of Mechanical Engineering, KES Rajarambapu Institute of Technology, Lohagaon, Pune - 411047, Maharashtra ,IN
  • Ramdas Biradar
     School of Engineering and Technology, PCET’s Pimpri Chinchwad University, Pune - 412106, Maharashtra ,IN
  • Rahul Shivaji Yadav
     Department of Mechanical Engineering, Marathwada Mitramandal's College of Engineering, Karvenagar, Pune - 411052, Maharashtra ,IN
  • Prashant Patil
     Department of Mechanical Engineering, Abhinav Education Society's College of Engineering and Technology, Satara - 412801, Maharashtra ,IN
  • Vaishali N. Patil
     Department of Engineering Science, Marathwada Mitramandal's College of Engineering, Karvenagar, Pune - 411052, Maharashtra ,IN
  • Sagar Arjun Dalvi
     Department of Mechanical Engineering, Abhinav Education Society's College of Engineering and Technology, Satara - 412801, Maharashtra ,IN

DOI:

https://doi.org/10.18311/jmmf/2024/44643

Keywords:

Critical Radius of Insulation, Flat Plate Collector, Heat Transfer, Selective Coating, Solar Drying

Abstract

This study highlights the crucial role of flat plate collectors in solar dryer applications for drying agricultural produce. The aim is to develop a solar collector from discarded aluminium beverage cans, following the IS 1933, 2003 standard. The performance is evaluated at three different mass flow rates to dry 12 kg of green chillies. The cylindrical curved surfaces of the tubes are coated with a mixture of activated charcoal and blackboard paint to meet insulation standards. The total efficiency of the collector is determined by measuring the incoming and outgoing air temperatures at various mass flow rates. Additionally, the weight and moisture content removed from the 12 kg green chillies is monitored every 30 minutes throughout the day. The results show that efficiency decreases with increasing mass flow rates, with the solar collector achieving its highest efficiency of 67.89% at a mass flow rate of 0.005 kg/s, effectively removing 88% of the moisture content from the green chillies. This underscores the importance of optimising mass flow rates to maximize the efficiency of solar dryers using recycled materials. The use of activated charcoal and blackboard paint coatings on the aluminium cans enhances heat absorption and retention, contributing to the overall efficiency of the solar dryer. Future research could explore the application of this technology to other types of agricultural produce and further refine the coating materials to improve thermal performance.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2024-08-19

How to Cite

Kurhade, A. S., Waware, S. Y., Munde, K. H., Biradar, R., Yadav, R. S., Patil, P., Patil, V. N., & Dalvi, S. A. (2024). Performance of Solar Collector Using Recycled Aluminum Cans for Drying. Journal of Mines, Metals and Fuels, 72(5), 455–461. https://doi.org/10.18311/jmmf/2024/44643

Issue

Volume 72, Issue 5, May 2024

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC
Received 2024-06-25
Accepted 2024-07-25
Published 2024-08-19

 

References

Deepak CN, Behura AK. Critical review on various solar drying technologies: Direct and indirect solar dryer systems. Applied Sol Energy. 2023; 59(5):672-726. https://doi.org/10.3103/S0003701X2360073X

Hande AR, Swami SB, Thakor NJ. Effect of drying methods and packaging materials on quality parameters of stored kokum rind. Int J of Agricultural and Biological Engineering. 2014; 7(4):114-26.

Sharma VK, Colangelo A, Spagna G. Experimental investigation of different solar dryers suitable for fruit and vegetable drying. Renew Energy. 1995; 6(4):413-24. https://doi.org/10.1016/0960-1481(94)00075-H

El-Sebaii AA, Shalaby SM. Solar drying of agricultural products: A review. Renew Sustain Energy Rev. 2012; 16(1):37-43. https://doi.org/10.1016/j.rser.2011.07.134

Bal LM, Satya S, Naik SN. Solar dryer with thermal energy storage systems for drying agricultural food products: A review. Renew Sustain Energy Rev. 2010; 14(8):2298-314. https://doi.org/10.1016/j.rser.2010.04.014

Fudholi A, Sopian K, Ruslan MH, Alghoul MA, Sulaiman MY. Review of solar dryers for agricultural and marine products. Renew Sustain Energy Rev. 2010; 14(1):1-30. https://doi.org/10.1016/j.rser.2009.07.032

Sharma S, Sharma VK, Jha R, Ray RA. Evaluation of the performance of a cabinet-type solar dryer. Energy Convers Manag. 1990; 30(2):75-80. https://doi.org/10.1016/0196-8904(90)90016-R

Maroulis ZB, Saravacos GD. Solar heating of air for drying agricultural products. Solar and Wind Technol. 1986; 3(2):127-34. https://doi.org/10.1016/0741-983X(86)90024-X

Bolaji BO. Performance evaluation of a box-type absorber solar air collector for crop drying. J Food Technol. 2005; 3(4):595-600.

Pangavhane D. Design, development and performance testing of a new natural convection solar dryer. Energy. 2002; 27(6):579-90. https://doi.org/10.1016/S0360-5442(02)00005-1

Fudholi A, Sopian K, Alghoul MA, Ruslan MH, Othman MY. Performances and improvement potential of a solar drying system for palm oil fronds. Ren Energy. 2015; 78:561-5. https://doi.org/10.1016/j.renene.2015.01.050

Aboghrara AM, Alghoul MA, Tuah H, Elbreki AM, Ammar AA, Sopian K, et al. Parametric study on the thermal performance and optimal design elements of solar air heater enhanced with jet impingement on a corrugated absorber plate. Int J of Photoenergy. 2018; 2018:1-21. https://doi.org/10.1155/2018/1469385

Zohri M, Fudholi A, Ruslan MH, Sopian K. Mathematical modelling of photovoltaic thermal PV/T system with a v-groove collector. AIP conference proceedings. 2017; 1862(1):030063. https://doi.org/10.1063/1.4991167

Hematian A, Bakhtiari AA. Efficiency Analysis of an air solar flat plate collector in different convection modes. Int J Green Energy. 2015; 12(9):881-7. https://doi.org/10.1080/15435075.2014.940621

Yeh HM, Ho CD. Collector efficiency in downward-type double-pass solar air heaters with attached fins and operated by external recycle. Energies. 2012; 5(8):2692-707. https://doi.org/10.3390/en5082692

Kurhade AS, Rao TV, Mathew VK, Patil GN. Effect of thermal conductivity of substrate board for temperature control of electronic components: A numerical study. Int J Mod Phys C. 2021; 32(10):2150132. https://doi.org/10.1142/S0129183121501321

Kurhade A, Talele V, Venkateswara RT, Chandak A, Mathew VK. Computational study of PCM cooling for the electronic circuit of smartphones. Mater Today Proc. 2021; 47:3171-6. https://doi.org/10.1016/j.matpr.2021.06.284

Kurhade AS, Murali G. Thermal control of IC chips using phase change material: A CFD investigation. Int J Mod Phys C. 2022; 33(12):2250159. https://doi.org/10.1142/S0129183122501595

Kurhade AS, Murali G, Venkateswara RT. CFD approach for thermal management to enhance the reliability of IC chips. Int J Eng Trends Technol. 2022; 71(3):65-72. https://doi.org/10.14445/22315381/IJETT-V71I3P208

Kurhade AS, Biradar R, Yadav RS, Patil P, Kardekar NB, Waware SY, Munde KH, Nimbalkar AG, Murali G. Predictive placement of IC chips using ANN-GA approach for efficient thermal cooling. J Adv Res Fluid Mech Therm Sc. 2024; 118(2):137-4. https://doi.org/10.37934/arfmts.118.2.137147

Patil SP, Kore SS, Chinchanikar SS, Waware SY. Characterization and machinability studies of aluminium-based hybrid metal matrix composites - A critical review. J Adv Res Fluid Mech Therm Sc. 2023; 101(2):137-63. https://doi.org/10.37934/arfmts.101.2.137163

Waware SY, Kore S, Patil P. Heat transfer enhancement in tubular heat exchanger with jet impingement: A review. J Adv Res Fluid Mech Therm Sc. 2023; 101(2):8-25. https://doi.org/10.37934/arfmts.101.2.825

Waware SY, Kore S, Kurhade AS, Patil P. Innovative heat transfer enhancement in tubular heat exchanger: An experimental investigation with minijet impingement. J Adv Res Fluid Mech Therm Sc. 2024; 116(2):51-8. https://doi.org/10.37934/arfmts.116.2.5158

Partheeban P, Jegadeesan V, Manimuthu S, Gifta CC. Cleaner production of geopolymer bricks using Solar-LPG hybrid dryer. J Clean Prod. 2024; 442:141048-8. https://doi.org/10.1016/j.jclepro.2024.141048

Kazem HA, Al-Waeli AHA, Chaichan MT, Sopian K, Al Busaidi AS, Gholami A. Photovoltaic-thermal systems applications as dryer for agriculture sector: A review. Case Studies in Thermal Engineering. 2023; 47:103047. https://doi.org/10.1016/j.csite.2023.103047

Tuncer AD, Khanlari A. Improving the performance of a triple-flow solar air collector using recyclable aluminium cans as extended heat transfer surfaces: An energetic, exergetic, economic and environmental survey. Energy (Oxford). 2023; 282:128883-3. https://doi.org/10.1016/j.energy.2023.128883

Tuncer AD, Amini A, Khanlari A. Experimental and transient CFD analysis of parallel-flow solar air collectors with paraffin-filled recyclable aluminium cans as latent heat energy storage unit. J Ene storage. 2023; 70:108009-9. https://doi.org/10.1016/j.est.2023.108009

Khanlari A, Tuncer AD, Afshari F, Sözen G. Utilization of recyclable aluminium cans as fins in a vertical solar air heating system: An experimental and numerical study. J Building Eng. 2023; 63:105446. https://doi.org/10.1016/j.jobe.2022.105446

Cuce PM, Saxena A, Cuce E, Yilmaz YN, Shaik S, Guo S. Thermodynamic performance analysis of a low-cost, recycled and energy-efficient solar air heater with waste beverage cans: An experimental research. J Therm Sci. 2023; 32(4):1657-70. https://doi.org/10.1007/s11630-023-1807-x

Most read articles by the same author(s)

1 2 > >>