Volume 71, Issue 12B , 2023

Articles

• Experimental Analysis and Optimization of Clearance between Punch and Die in Sheet Metal Blanking Process for Soft Steel

  Swapnil Suresh Bhoir, Manoj Maruti Dongare, Munna Verma (Author)

  01-05

  Keywords:

  Experimental Analysis, Material Separation, Optimization, Sheet Metal, Soft Steel

  • PDF ²²

  Abstract views: 68 times| Download: 22 times| https://doi.org/10.18311/jmmf/2023/45490

• Effects of ZnO Nano-Particles’ on The Performance Study of CI Engines Utilizing a Combination of Diesel and Neem Biodiesel

  Rohit Singh, Rajesh Kumar Porwal, Vijay Verma (Author)

  06-11

  Keywords:

  Biodiesel, Calorific Value, CI Engine, Kinematic Viscosity, Nanoparticles

  • PDF ³³

  Abstract views: 61 times| Download: 33 times| https://doi.org/10.18311/jmmf/2023/45491

• Optimization of Multi-Performance Parameters in EDM through Grey Relational Analysis using Deionized Water

  Devesh Pratap Singh, Sharad Yadav, Naman Sisodia, Dipesh Kumar Mishra, Rabesh Kumar Singh (Author)

  12-20

  Keywords:

  EDM, GRA, MRR, Optimization, Surface Roughness

  • PDF ³⁷

  Abstract views: 113 times| Download: 37 times| https://doi.org/10.18311/jmmf/2023/45492

• The High Strain Rate Response of A Bio-Mimetic Composite Plates

  Pankaj Gupta, Yogesh Shrivastava (Author)

  21-26

  Keywords:

  Composite, Strain Rate, Split Hopkinson Pressure Bar.

  • PDF ¹⁷

  Abstract views: 25 times| Download: 17 times| https://doi.org/10.18311/jmmf/2023/45493

• CFD Approach to Evaluate Pin-Fin Performance for Forced Convection Heat Transfer

  Ayush Naman, Ayush Kamle, Kanishk Sahu, K. G. Nithesh (Author)

  27-37

  Keywords:

  CFD, Duct, Forced Convection, Pin-Fin.

  • PDF ³⁵

  Abstract views: 80 times| Download: 35 times| https://doi.org/10.18311/jmmf/2023/45494

• Analysis of Dielectric Properties of Carbon-Epoxy Composite Laminates

  M. Umashankar, Hadimani Shivakumar, N. M. Renukappa, S. Parameshwara (Author)

  38-42

  Keywords:

  Carbon Fiber, Composite Laminates, Electro-Spinning, Interleaving.

  • PDF ¹¹

  Abstract views: 18 times| Download: 11 times| https://doi.org/10.18311/jmmf/2023/45495

• Chemically Modified Screen-Printed Electrodes: An Electrochemical Interface for Nitrite Ions

  Raghu G. Kempegowda, Rohan B. Gokavi, K. R. Shadakhara Murthy, Craig E. Banks (Author)

  43-51

  Keywords:

  Cyclic Voltammetry, Nitrite, Real Samples, Sensor, Zinc Oxide.

  • PDF ²⁰

  Abstract views: 29 times| Download: 20 times| https://doi.org/10.18311/jmmf/2023/45512

• Investigations on the Influence of Nylon-66 Interleaving on the Fiber Matrix Interactions of Quasi-Isotropic Carbon Epoxy Composites using DMA

  M. Umashankar, Hadimani Shivakumar, N. M. Renukappa, S. Parameshwara (Author)

  52-62

  Keywords:

  Carbon Epoxy Composites, γ-Irradiation, Nylon-66 Interleaving, Storage Modulus.

  • PDF ¹²

  Abstract views: 18 times| Download: 12 times| https://doi.org/10.18311/jmmf/2023/45513

• The Influence of Stacking Sequence on the Mechanical Properties of Woven Bamboo and Jute Fiber Reinforced Epoxy Hybrid Composites

  R. K. Radhakrishna, R. Mallikarjuna Swamy, R. Shivashankar, R. Shankara Reddy (Author)

  63-72

  Keywords:

  Bamboo, Epoxy, Flexural, Jute, SEM, Stacking Sequence, Tensile.

  • PDF ¹⁹

  Abstract views: 25 times| Download: 19 times|

• Modelling Substrate Analysis for Remanufacturing: Investigating the Plasma Beam Remelting Process (PBRP) in Surface Modification of Additively Manufactured SS316L

  N. Chethan Kumar, Suyog Jhavar (Author)

  73-85

  Keywords:

  Finite Elements Analysis, Heat Treatment Effect Zone (HTEZ), Plasma Beam Remelting, Thermal Zonal Area.

  • PDF ¹⁸

  Abstract views: 31 times| Download: 18 times| https://doi.org/10.18311/jmmf/2023/45515

• Thermal Properties of Epoxy-GNP Based Nano-Dielectrics

  Hadimani Shivakumar, M. Umashankar, G. D. Gurumurthy, N. M. Renukappa, S. Parameshwara (Author)

  86-90

  Keywords:

  Graphene, Nano-dielectrics, Thermal Conductivity, Three Roll Mill.

  • PDF ¹⁴

  Abstract views: 24 times| Download: 14 times| https://doi.org/10.18311/jmmf/2023/45496

• TEM Analysis and Insights into the Physicomechanical Characteristics of CeLa-Substituted Bio-Glass Ceramics

  Md Ershad, Hrishikesh, Priyam Mondal, Ranjan Kumar (Author)

  91-95

  Keywords:

  Bio-Glass Ceramics, Bone Tissue Engineering, CeLa Substitution, Earth Metals, Mechanical Properties, TEM.

  • PDF ³³

  Abstract views: 50 times| Download: 33 times| https://doi.org/10.18311/jmmf/2023/45547

• Recent Advancements in Developing Metal Matrix Composites with Arc-Assisted Cladding Techniques: A Review

  Kamlesh Kumar Singh, Anil Kumar Das (Author)

  96-101

  Keywords:

  Cladding, Materials, Metal Matrix Composite, Properties of Metal, Review.

  • PDF ³²

  Abstract views: 29 times| Download: 32 times| https://doi.org/10.18311/jmmf/2023/45536

• Design and Analysis of an Effi-Cycle Frame Structure by Using Different Grades of Steel

  Rajat Mathur, Rahul Dubey, Ripudaman Singh, Rudra Pratap Singh, Jeetendra Kumar Yadav (Author)

  102-111

  Keywords:

  ANSYS, CATIA V5, Design, Effi-Cycle, Steel Grades.

  • PDF ¹³

  Abstract views: 21 times| Download: 13 times| https://doi.org/10.18311/jmmf/2023/45537

• Optimising Intake Manifold to Increase the Efficiency of I.C. Engine

  Aditya Chauhan, Anikait Arya, Ayush Bhatnagar, M. Zunaid (Author)

  112-120

  Keywords:

  Ansys, Intake Manifold Geometries, Vortex Generator.

  • PDF ¹¹

  Abstract views: 15 times| Download: 11 times| https://doi.org/10.18311/jmmf/2023/45538

• Static Structural and Thermal Analysis of Marine Engine Pistons with Different Materials

  Manas Sisodia, Mayank Kumar, Rishabh Sharma, Ahmed Ansari (Author)

  121-130

  Keywords:

  Energy Efficiency, Marine Engine, Materials, Thermal Analysis, Wartsila 32.

  • PDF ¹⁹

  Abstract views: 24 times| Download: 19 times| https://doi.org/10.18311/jmmf/2023/45539

• A Review of the Effects of Injection Strategy and Combustion Chamber Geometry Modification and a Single - Cylinder Diesel Engine

  Sudipta Nath, Ranjan Kumar, Shahanwaz Khan, Somnath Das (Author)

  131-138

  Keywords:

  CFD, Diesel Engine, Fuels, Performance of Emission.

  • PDF ²¹

  Abstract views: 57 times| Download: 21 times| https://doi.org/10.18311/jmmf/2023/45540

• Examining the Performance Traits of a Rear-Supported V-Cone Flowmeter

  Hrishikesh, Md Ershad, Ranjan Kumar (Author)

  139-142

  Keywords:

  Accuracy, Flow Measurement, Fuels, Repeatability, Stability, V-Cone Flowmeter.

  • PDF ¹⁵

  Abstract views: 39 times| Download: 15 times| https://doi.org/10.18311/jmmf/2023/45541

• Continuous Wavelet Transform based Crack Detection in a Metallic Shaft

  Bhupal Kumar, Ratnesh Kumar, Ramnivas Kumar (Author)

  143-150

  Keywords:

  Continuous Wavelet Transform, Metal Crack, Operating Deflection Shape, Shaft.

  • PDF ²³

  Abstract views: 35 times| Download: 23 times| https://doi.org/10.18311/jmmf/2023/45543

• Parallel Finite Element Analysis of 1D and 2D Problems of Heat Distribution in Mine Ventilation Galleries

  Ashish Narayan, Bhupal Kumar, Ranjan Kumar, Subodh Kumar (Author)

  151-160

  Keywords:

  Computational Time, Iteration, Mines, Parallel Programming.

  • PDF ²¹

  Abstract views: 34 times| Download: 21 times| https://doi.org/10.18311/jmmf/2023/45544

• Fabrication of a System to Convert Waste Plastic into Fuel

  S. B. Arun, P. Harsha Vardhan, K. B. Nandan, N. S. Preetam, T. M. Rajath (Author)

  161-166

  Keywords:

  Depolymerization, Fossil Fuels, Hydrocarbons, Plastics, Pyrolysis, Waste Management.

  • PDF ⁴¹

  Abstract views: 28 times| Download: 41 times| https://doi.org/10.18311/jmmf/2023/45546

• Deformation Behaviour Analysis of Structures for Impact Loading

  G. V. Ramesh, B. Kushal, K. N. Charan, R.R. Mohan, C. T. Manjunath (Author)

  167-171

  Keywords:

  Abaqus Explicit, Ansys, Auxetics, FEA, Poisson’s Ratio.

  • PDF ⁸

  Abstract views: 23 times| Download: 8 times| https://doi.org/10.18311/jmmf/2023/45545

• Wear Characteristics of AZ91D Magnesium Alloy under Dry Sliding Condition against Hardened Alloy EN31 Steel Disc

  Anil Kumar Das (Author)

  172-176

  Keywords:

  Friction Coefficient, Magnesium Alloy, Wear Characteristics.

  • PDF ²¹

  Abstract views: 34 times| Download: 21 times| https://doi.org/10.18311/jmmf/2023/45581

• Analysis of Surface Roughness, Cutting Force and Cutting Fluid Consumption in Turning Operation with and Without Use of Cutting Fluid Optimizer

  Naman Sisodia, Mahip Singh, Rabesh Kumar Singh, Anuj Kumar Sharma, Amit Rai Dixit (Author)

  177-185

  Keywords:

  Coolant Regulation, Cutting Fluid Optimizer, Grey Relational Analysis, Taguchi.

  • PDF ¹⁶

  Abstract views: 44 times| Download: 16 times| https://doi.org/10.18311/jmmf/2023/45583

• Reactivity Controlled Compression Ignition Engine Powered with Plastic Oil and B20 Karanja Oil Methyl Ester

  G. S. Jatadhara, T. K. Chandrashekhar, N. R. Banapurmath, S. B. Nagesh, N. Keerthi Kumar (Author)

  186-192

  Keywords:

  Biodiesel, Combustion, Emissions, Plastic Oil.

  • PDF ³²

  Abstract views: 39 times| Download: 32 times| https://doi.org/10.18311/jmmf/2023/45584

• Combustion Characteristics of a Variable Compression Ratio Diesel Engine Using Hibiscus Cocos nucifera Biodiesel and Taguchi Optimization

  Alapati Babji, Govada Rambabu, D. Balaji Naik, Sowmya Jonnagiri (Author)

  193-208

  Keywords:

  Biodiesel, Combustion, Compression Ratio, Hibiscus cocos nucifera Oil.

  • PDF ¹⁶

  Abstract views: 32 times| Download: 16 times| https://doi.org/10.18311/jmmf/2023/45585

• Impact of Compression Ratio on the Performance and Emission Characteristics of a CI Engine Working with Ternary Blended Biodiesel

  H. S. Anantha Padmanabha, Dillip Kumar Mohanty (Author)

  209-216

  Keywords:

  Combustion, Engine Performance, Ternary Biodiesel Blend, Transesterification.

  • PDF ⁷

  Abstract views: 17 times| Download: 7 times| https://doi.org/10.18311/jmmf/2023/45586

• Bending Behavior of Clamped Skew Plates

  C. V. Srinivasa, Hemaraju, Ashok R. Banagar, S. Chethan, Udaya Devadiga (Author)

  217-226

  Keywords:

  Bending Analysis, Finite Element, Non-Dimensional Deflection Coefficients, Skew Plates.

  • PDF ¹³

  Abstract views: 41 times| Download: 13 times| https://doi.org/10.18311/jmmf/2023/45587

• Physio-Mechanical Properties and Microstructural Characteristics of Friction Stir Welded Aluminium and Copper Plates Using Conical Unthreaded Tool

  P. Harisha, H. M. Nanjunadaswamy, H. N. Divakar, B. S. Raju (Author)

  227-234

  Keywords:

  Friction Stir Welding, Heat Affected Zone (HAZ), Stir Zone (SZ), Thermo-Mechanical Affected Zone (TMAZ).

  • PDF ¹⁰

  Abstract views: 26 times| Download: 10 times| https://doi.org/10.18311/jmmf/2023/45588

• Assessing the Sustainability of Diverse Biofuels through Life Cycle and Techno-Economic Analysis

  Nisit Kumar Parida, Kavita Jha, Ravi Nigam (Author)

  235-239

  Keywords:

  Biodiesel, Energy, Fuels, Greenhouse Gas

  • PDF ²⁰

  Abstract views: 67 times| Download: 20 times| https://doi.org/10.18311/jmmf/2023/45549

• Optimization of Chemical Engineering Processes in the Mining and Metal Industry: A Review

  Santosh Walke, Manoj B. Mandake (Author)

  240-251

  Keywords:

  Big Data analytics, Chemical Engineering Processes, Metal Industry, Mining, Neural Network

  • PDF ²⁵

  Abstract views: 40 times| Download: 25 times| https://doi.org/10.18311/jmmf/2023/45589

• Multiquadric Collocations for Nonlinear Vibration of Functionally Graded Plates of Ti–6Al–4V Metal

  Pankaj Gupta, Bhagat Singh, Yogesh Shrivastava, Sunil Kumar (Author)

  252-260

  Keywords:

  FGM, Meshfree Method, MQRBF, Nonlinear Free Vibration, Plates

  • PDF ⁷

  Abstract views: 18 times| Download: 7 times| https://doi.org/10.18311/jmmf/2023/45590

• Study of Design and Analysis of S-glass Fiber Reinforced Epoxy Polymer Metal Laminate Composites in the Application of Propeller Shafts

  S. Sudindra, S. A. Deepak (Author)

  261-268

  Keywords:

  Ansys APDL, ASME, FML, LMV

  • PDF ²⁵

  Abstract views: 32 times| Download: 25 times| https://doi.org/10.18311/jmmf/2023/45591

• From Powders to Alloys: A Study of the Mechanical Alloying Process and Sintering

  Rayappa Shrinivas Mahale, Shamanth Vasanth, P. C. Sharath, R. Shashanka, Gangadhar M. Kanaginahal, Vaibhav Raibole, Krishnamurthy Goggi, Adarsh Patil, S. B. Angadi (Author)

  269-276

  Keywords:

  Ball to Powder Ratio, Mechanical Alloying, Mechanical Properties, Milling Duration, Sintering

  • PDF ¹⁴

  Abstract views: 34 times| Download: 14 times| https://doi.org/10.18311/jmmf/2023/45622

• Microstructural Characterization and Mechanical Properties of LDSS2101 Using Gas Tungsten Arc Welding

  Sravanthi Gudikandula, Ambuj Sharma, Amit Kumar, B. Ratna Sunil, Pushkar Jha (Author)

  277-285

  Keywords:

  Austenitic Stainless Steel, Duplex Stainless Steel, Lean Duplex Stainless Steel, Microstructure, Scratch Hardness

  • PDF ¹³

  Abstract views: 36 times| Download: 13 times| https://doi.org/10.18311/jmmf/2023/45624

• Design Optimization and Analysis of Trenching Excavator Bucket

  Sinai Kakodkar Anish Anant, Yogita Potdar, Mahesh Haldankar, Pradosh Pramod Hegde (Author)

  286-291

  Keywords:

  Design Optimization, Equivalent Elastic Strain, Static Structural Analysis, Trenching Excavator Bucket, Total Deformation

  • PDF ¹⁹

  Abstract views: 31 times| Download: 19 times| https://doi.org/10.18311/jmmf/2023/45733

• Advances in Adhesive Bonded Joints for Composite Materials: A Comprehensive Review

  R. Hanumantharaya, B. G. Prem Kumar, Amitkumar, M. S. Vinod Kumar (Author)

  292-298

  Keywords:

  Adhesives, Composites, Failure Load, Joint Strength, Single Lap Joints

  • PDF ³³

  Abstract views: 42 times| Download: 33 times| https://doi.org/10.18311/jmmf/2023/45735

• Development and Evaluation of Mechanical Properties of AL6061 Based Hybrid Nano Composites Reinforced with Al₂O₃ and ZrO₂

  P. S. Shreyas, B. P. Mahesh, S. Rajanna, B. S. Ragavendra (Author)

  299-305

  Keywords:

  Aluminium6061, Al₂O₃, ZrO₂, Mechanical Properties

  • PDF ¹⁶

  Abstract views: 26 times| Download: 16 times| https://doi.org/10.18311/jmmf/2023/45736